I can't thank you enough for this video, my assignment is late and need to submit soon, thanks for the guide you created for us all here, I'm going to follow you on facebook.
Thank you thank you thank you ive been struggling through the class and cannot find anyone who speaks english (im american and only speak english) all of the other ones are in spanish or a different language so there not any help to me ill b sticking to your channel from now on when i need help keep up the amazing work
For those who have a problem with "Console into SW1 from the Terminal on PCA" - CLI should be locked. You should use Terminal on PCA to configure router first, and then switch your cable from Router to Switch, and then open again Terminal on PCA, here you go, configure Switch.
You ARE A LEGEND! This is THE answer I've been looking for! ALL videos showing "click to switch", but YOU, and only YOU, point it out the "Console into switch". BIG THANKS!
15:55 The command you typed in for Disabling all unused switch ports didn't work for me so I typed in the exact command on the instructions "interface range F0/2-24, G0/2" and it worked.
hello tech Acad! I have a question. when I go to open the CLI tab for SW!, it says the CLI tab is locked. Do you know why this is and how I can access it? Your videos are amazing and help me so much. Thank you!
Same here, I checked results and I get 97% because my startup config for switch 1 is wrong but I don’t know where I’m messing up. I even redid everything
for some reason keep getting an invalid command whenever I get to the ssh step in the command prompt from PCA. I've followed every instruction you said to the letter and Im ready to punch a hole in my monitor
i am getting an invalid command in the PCA cmd when i type in the information according to ssh -1username target :S and i have followed the steps correctly
my exam is something like this there is lots for me to remember and idk that question configer ssh and yea I stuck there no matter how much tries I got and then have to retest again
hello! thanks for uploading this video, but i have a problem considering the "interface gigabitEthernet 0/0". after typing that command terminal keep saying: "%Invalid interface type and number". what should i do to solve this issue?
what is the password on the command prompt your not showing me what is the rest password im having a very hard time doing this and its letting me because you not showing how to type that stuff on the command prompt im very stuck on it and I dont wanna give up...
3 years later and this is still helping immensely. THANK YOU!
thank you very much for helping me in completing my college assignments
Happy to help!
And thanks for your great support my dear Friend...
@@TechAcad thank you so much good sir I'm really bad at this to be honest
This is high school for me
I really wish they were more specific with directions. Thank you for helping me understand this. You’ve been a real life saver.
'thank you so much for making these videos!!! I know I wouldn't make it thru this semester without your help
You are so welcome!
I just want to thank you for the wonderful videos you have produced regarding packet tracer. Your videos got me through this last semester.
Great to hear!
You're the only reason i have a 94% in this 8-week class before taking the final exams, THANK YOU!!!!!!
Glad it helped!
i woulda died without your videos man thank you so much.
Literally the goat of virtual learning
Glad it helped!
I can't thank you enough for this video, my assignment is late and need to submit soon, thanks for the guide you created for us all here, I'm going to follow you on facebook.
I'm glad this video helped you get your assignment in on time!
Thanks so much for these videos. It really helps going through these step by step.
Great to hear!
you are the best explaining thank you
Thank you thank you thank you ive been struggling through the class and cannot find anyone who speaks english (im american and only speak english) all of the other ones are in spanish or a different language so there not any help to me ill b sticking to your channel from now on when i need help keep up the amazing work
Thank you very much for the great video, very clear with each steps, and good in explaining too.
Glad it was helpful!
For those who have a problem with "Console into SW1 from the Terminal on PCA" - CLI should be locked. You should use Terminal on PCA to configure router first, and then switch your cable from Router to Switch, and then open again Terminal on PCA, here you go, configure Switch.
You ARE A LEGEND! This is THE answer I've been looking for! ALL videos showing "click to switch", but YOU, and only YOU, point it out the "Console into switch". BIG THANKS!
Amazing. So helpful for when I get stuck. Thank you.
Glad it helped!
Thank u for helping me out with my college work assignment
this is so helpful man
you awesome
Glad it helped!
Your videos are excellent!
Thank you very much!
Ty! You are a life saver! ♥️
Glad it helped!
Top video, you guys don't miss!!!!!!
You're the best!
thank you so much for wonderful explanations
So nice of you
I can’t thank you enough 👍
Any time!
Thanks for the great work you are doing. Is it possible to download this for step by step practice? Thanks again.
Thank you so much for your great support...
And you can contact us using our website. Link you will get from our Facebook Page.
You're awesome! Super helpful!!!
Glad it was helpful!
15:55 The command you typed in for Disabling all unused switch ports didn't work for me so I typed in the exact command on the instructions "interface range F0/2-24, G0/2" and it worked.
Glad it helped!
You are the Best. Thanks
You're welcome!
Thank you for your help.
Glad it helped
hello tech Acad! I have a question. when I go to open the CLI tab for SW!, it says the CLI tab is locked. Do you know why this is and how I can access it? Your videos are amazing and help me so much. Thank you!
That's how it should be. You should switch console cable from router to Switch, and then use terminal on PCA.
thank you 😇
You're welcome 😊
sir i wrote wrong password on 12:01, now it states connection refused by host..which is uncurable
What i can do to resolve it?
You can try with the correct password!
Thank you professor
You are very welcome
Thank you soo much!!!
Could you please do the Thank you? 10.4.4 Lab - Build a Switch and Router Network I search but not find it
I complete my assignment by following your steps it shows 95% but should i do?
Same here, I checked results and I get 97% because my startup config for switch 1 is wrong but I don’t know where I’m messing up. I even redid everything
Thank you, friend
Thank you too
Thank you again!
You are welcome!
Why i couldn't enter the RTA password? the password was 123 but it kept saying it was invalid
Thank you!
You bet!
thank you so much broo
You're welcome!
thank you
You're welcome
Hi Tech Acad, you are doing wonderful job. Can i request you please provide us all the Packet tracer files and Documents for CCNAv7 . Thanks
Hi
please contact us using our website. Link you will get from our Facebook Page...
what application do you use for recording?
thanks
You're welcome!
for some reason keep getting an invalid command whenever I get to the ssh step in the command prompt from PCA. I've followed every instruction you said to the letter and Im ready to punch a hole in my monitor
Make sure that you give the correct command
ssh -l username target
where -l is (dash L in Lower case).
i am getting an invalid command in the PCA cmd when i type in the information according to ssh -1username target :S and i have followed the steps correctly
Hi it is not ssh dash one. It is ssh -l (Small letter L)
Thank you
@@TechAcad oh lord xD well that explains it, thanks alot my dude!
I had the same problem, feel kinda silly for typing "1" over and over lol
I did everything correctly, but Vlan1 has an issue with port status, I dont really want to restart this entire thing again (my 4th time)
why is it line vty 0 15 ? can I set it up from 1 15 or 1 99 something like that or digits beyond?
No!
We can create 16 maximum session to connect the device remotely using Telnet or SSH!
thanks man!!
Happy to help!
RTA and SW1 are both locked, so cannot console to RTA from PCA, kindly suggest a solution. Thanks
at the moment of wanting to configure SW1 it tells me that CLI tab is locked.
How or what can I do?
You can connect the device using a console cable, and configure it!
That's how it should be. You should switch console cable from router to Switch, and then use terminal on PCA.
12:20
my exam is something like this there is lots for me to remember and idk that question configer ssh and yea I stuck there no matter how much tries I got and then have to retest again
please post the pdf or give a link to it
hello! thanks for uploading this video, but i have a problem considering the "interface gigabitEthernet 0/0". after typing that command terminal keep saying: "%Invalid interface type and number". what should i do to solve this issue?
Please verify the correct interface name and type it!
what is the password on the command prompt your not showing me what is the rest password im having a very hard time doing this and its letting me because you not showing how to type that stuff on the command prompt im very stuck on it and I dont wanna give up...
password@123
i dont know why but my SW1 CLI is locked and I don't know how to unlock.. TT
You can access that using the Console cable!
Thanks for your great support and sharing my dear friend!
That's how it should be. You should switch console cable from router to Switch, and then use terminal on PCA.
DO THE CHECK RESULT
Hello brother, could you please help me solve a packet tracer problem?May i have your email?I want to send the packet tracer file..Pls im begging😢😩
Hi
You can contact our team using our website. Link you will get from our Facebook Page.
Can you do 16.5.2?
Nevermind!
another 100% completion rate .
gigabite tarantino
whats password sir ??
password@123
you made a lot mistakes in the CLI. it was confusing. not a great vid.
Thanks for the feedback, I'll make sure to clarify that in future videos!
thank you
You're welcome