Big Sauce JK | Stretching With Rock Krawler X-Factor Control Arms
Вставка
- Опубліковано 5 жов 2024
- Just got some Rock Krawer X-Factor mid control arms for our Jeep JK Big Sauce. The Front arms were set to recommended length by instructions but the rear was set to the longer "flat fender" length
_________________________________________________________________
Merch here:
teespring.com/...
_________________________________________________________________
Our Links
Instagram:
@sam.coley
www.instagram....
_________________________________________________________________
Music used for footage courtesy of Epidemic Sound
(www.epidemicsou...)
Great video. I was recently presented nearly the same identical challenges with my JK, and they are currently being addressed. Also going with Rock Krawler high clearance front Lower control arms to fix the low caster issues. Mine was also at about 1, when it should be closer to 5.
Very nice. I like the rockkrawler x factor. The arms are joints are great. So much flex, it's crazy.
gave it an awesome stance looks like it drives better too
Cleanest Jeep I've ever seen! Must be a show Jeep
Love my X-factor lift as well. It's not really a stretch though. All fully adjustable arms on the market allow for that inch "stretch" in the rear.
The zerk should b facing up and rk instructions u have to notch out front lower arm mounts at axle also which is a must dont skip instructions
What was the wheelbase before and after? Thanks for the awsome videos!
That beast keeps getting better and better cant wait to meet up at a jeep event
I’m so Jelly... 🙀 Can’t wait to get all 4 arms. Rig looks good man. Get them drive shafts quick. My buddy doug is in the same boat as you and his just whent out. Great video. Keep it up.
Nice video guys
Done a good job with your Jeep man. Lookin badass for sure. Subscribed..
Subscribed! SandSpyderJK in da houseeeee. Haha! Great video man. Only just bumped into your channel. 🤙🏼
What did you use on your frame to keep it rust free?
Looks awesome
Such a good video!
You have way to much thread exposed on your rear upper and lower arms! RK says no more than 3/4”
U a big Man U be sittin in that tiny chair
Beautiful rig, what year?
Looking sick af bro
Very nice video! How often should you grease up the control arms.
How did the ride change ? Have you noticed anything different ?
Question for you...I've been running the 3.5 X-Factor for over 7 years. I've always kept an eye on my front brake lines because they rest on the LCA's. I noticed that you have small brackets that hold the line up off of the LCA. Did those come with your kit?
Sweet rig buddy. How much length over stock did you end up with on those upper rears?
Flip flops and socks!😂💜💕
What kind of lift did you start with?
Pretty cool video i learned alot
Sick jeep man, what are those front fenders you have?
Tires are sick! What size tire and how do u keep um so clean!!
I noticed you put your bends on your front lower control arms facing to the top. Does your tire hit them at full turn. I put mine facing inside.
Did you have .75 coil spring spacers in the rear or just the correction wedges?
Are you waiting for that axle to go before replacing. Which one will u go with?
What’s your rear pinion angle and how’s the coil spring look?
I just bought a RK 2.5” X factor mid arm suspension for a jku but mine is a 2door. I contacted RK about it and they said that the only difference was it would raise it up 1” higher than the 4 door. I know that you have got rid of big sauce now but I was wondering if you ever got a drive shaft for it and did you get both front and rear? Any hints or tips that you can give on doing the lift? I have got to buy the necessary tools to install it . You wouldn’t want to make a little money doing mine would you?
I’m in Cullman. I had a local shop install for $550 front is really loose and rear when riding over speed bumps are feeling like it bottom out. I don’t know anything about lifts so I gotta get someone that’s in the know to see if the shop did it correctly. The shop sells rough country and are mainly a moto cross and vehicle garage.They lock tite the jam nuts and marked them with paint markers for visual movement inspection. They had another tire shop do the alinement so it might’ve been them that moved something and got the rear end to do the bottom out feel. I also have bilstien 5100 shocks that were installed with the kit. My rubicon has about 57k mileage. I don’t have a rear seat or rear tire and it’s a automatic transmission.Thanks again.
Yes
You will need a new rear drive shaft
Make sure all the angles are correct or u will b eating U joints
Great video, but I fell a sleep little bit 🙂
What are the brackets in the rear you removed?
Love the rims what brand are they
how did this get stretched?
Intrinsic Off-road How long was the stretch? Looking at stretching my JK.
Hold my BEER and watch my wheel bearings fail. Should be the title.
Never ever ever torque the control arms while it's up in the air.......need to torque with the wheels and tires on and the jeep on the ground......you'll bind up the bushings the way you did it.