You have the very same set up! My F10 is a 2016 and the videos searched prior to yours were different in Variation! I used a Foxwell NT800 Series to put into service mode! Everything went smoothly! Thank you for the awesome DIY video!
Excellent video! Keep it up man just forgot to add that u need to check resorvoir after pushing piston back so u dont overflow the container sometimes u need to remove some.
Hello from estonia, thank you for sharing video about changing brake bads and disck, soon i have gonna do same thing to my bmw f11 and gonna do step by step with your video and maybe save a little money from workshop😅 Thank you again my friend and many many subscribers to you and likes too😁
Thanks for the video! Are you going to renew also the rubber protection from the rear shock absorbers? It looked torn apart in your video. If you do, please also make a video about this.
hello, I'm also going to replace the discs, everyone says it's better to give oem because replacements are problems, I would like to know if there were any problems?
do i need to have a voltage stabilizer/regulator or power supply when using ista p in service mode or i can turn of the ignition and then reset it ? i am asking because voltage stabilizers are crazy expensive and am not sure about the cheap ones on ebay,,
Hey I have the same car and I've been thorough 4 sets of different disc and pads, both floating hub and monobloc on my F10, neither lasting for more than 3000 miles, any chance it could be the calliper?
Good video, but of my experience, the spreader clamp was easier to use than brake caliper tool. Also, can't void scratches on painted calipers if you are alone 😃
Ciao Francesco. Come mai hai dovuto utilizzare anche l'attrezzo per retrarre i pistoni delle pinze posteriori? Non si chiudono completamente tramite service mode?
Bonjour Francesco, j'ai changé les disques et plaquettes avant, avec changement du témoin d'usure et je n'arrive pas à faire "reset" , ça met reser échoué, tu as une idée ?, merci.
can you do this using some other software for electronic handbrake service mode? I have a iCarSoft CR pro and there is an option to set the electronic handbrake to service mode, but I am unsure if I should use it
Mine are HX9 too. Really set me back as I had everything prepared, car on stands, wheel off only to find I needed a 9mm not a 7mm as described. Mine’s a 535d.
What is the fuel consumption in city, i am planning to buy f10 lci 530d rwd and i want to know how much is the consumption. Can i afford the 3.0d or i will must buy a 2.0d
I had a 2011 530d and now have a 2017 520d. I averaged 8,5 on the 530 and now 6,3 with the 520d. Do about 40k km per year, mostly highway. U should add easily 1,5-2 litres for city traffic
Yes, I do mine without the software and it can be done manually using a ratchet/socket to screw the piston out to the service position. Just google it online and there are a couple of videos on the procedure, I think Bavarian Auto has a video on it that is pretty good even though they no longer are in business.
Quelli rivettati sono più leggeri ma anche più soggetti a sviluppare Vibrazioni con l'usura nel tempo, ad oggi ho percorso quasi 5 mila km con i monolitici e zero Vibrazioni! :) Saluti!
Invece la situazione e contrario! Ii dischi rivetatti hanno una maggiore dispersione di calore ! Io ho messo su dischi + pastiglie della bosch in due parti, e doppo 20milla km sono ancora perfetti! Comunque le pastiglie della bosch, quelle posteriori non sono al livello di quelle originali bmw ! Come ti trovi con le pastiglie della meyle?
sono a quasi 5 mila km è mi trovo da Dio, il problema delle vibrazioni viene fuori solo con i rivettati proprio per le dilatazioni maggiori del alluminio della campana in 2 pezzi, con i miei dischi Mayle per ora tutto Perfetto ;)
@@FrancescoGalante91 Come va con i dischi? Comunque leggevo che spesso le vibrazioni dipendono dall'usura dei cuscinetti ruota, che, se superano tolleranze, fanno oscillare disco e ne provocano ovalizzazione ...
@@FrancescoGalante91 non credo siano i supporti, comunque i motori sono simili. La tua ha l adblue ed è euro 6. Complimenti per la tua manualità, in questo modo si risparmiano tanti soldi. 👍
Love your videos!... straight to the point, clear to see & understand. Keep it up!
You have the very same set up! My F10 is a 2016 and the videos searched prior to yours were different in Variation! I used a Foxwell NT800 Series to put into service mode! Everything went smoothly! Thank you for the awesome DIY video!
Excellent video! Keep it up man just forgot to add that u need to check resorvoir after pushing piston back so u dont overflow the container sometimes u need to remove some.
Hello from estonia, thank you for sharing video about changing brake bads and disck, soon i have gonna do same thing to my bmw f11 and gonna do step by step with your video and maybe save a little money from workshop😅
Thank you again my friend and many many subscribers to you and likes too😁
Thank You For Watching! :-)
Thanks man, very clear explanation, worked like a charm!
Thank You for Watching! :-)
Thanks very much came in useful to myself and I'm sure thousands of others.
Thanks for the video!
Are you going to renew also the rubber protection from the rear shock absorbers? It looked torn apart in your video.
If you do, please also make a video about this.
hello, I'm also going to replace the discs, everyone says it's better to give oem because replacements are problems, I would like to know if there were any problems?
do i need to have a voltage stabilizer/regulator or power supply when using ista p in service mode or i can turn of the ignition and then reset it ?
i am asking because voltage stabilizers are crazy expensive and am not sure about the cheap ones on ebay,,
Hi. Great Video. Can you confirm how the discs were? Did vibration disappear with solid discs?
Dear Francesco,
What is your opinion after 1 year about the monoblocs?
Hi do you have to replace all bolts or reused them,
Con que maquina has escrito en la revision "FRA BMW" me encanta,yo quiero hacer lo mismo😢
Hi, how are the discs after 7 months of usage?
Hey I have the same car and I've been thorough 4 sets of different disc and pads, both floating hub and monobloc on my F10, neither lasting for more than 3000 miles, any chance it could be the calliper?
Well done! ✅
Nice!
On these the brakes are electronic how do you wind em back?
Good video, but of my experience, the spreader clamp was easier to use than brake caliper tool.
Also, can't void scratches on painted calipers if you are alone 😃
Can I push the piston back with no special tools?
Very good video! Scary music though, reminds me of The Caretaker - Everywhere at the end of time
Ciao Francesco. Come mai hai dovuto utilizzare anche l'attrezzo per retrarre i pistoni delle pinze posteriori? Non si chiudono completamente tramite service mode?
Bonjour Francesco, j'ai changé les disques et plaquettes avant, avec changement du témoin d'usure et je n'arrive pas à faire "reset" , ça met reser échoué, tu as une idée ?, merci.
Can you tell me which Ista i need and what kind of cable I need to connect my pc to the car?
can you do this using some other software for electronic handbrake service mode? I have a iCarSoft CR pro and there is an option to set the electronic handbrake to service mode, but I am unsure if I should use it
I have used Foxwell for BMW successfully to retract the EPB on my 2015 F10.
Ciao Francesco. La mia 530 2015 monta invece 348x36 e anche le pastiglie sono diverse, come mai ste diferenze?
how is possible that guiding bolts on front brake caliper is HX9? On my 535i F11 2011
Mine are HX9 too. Really set me back as I had everything prepared, car on stands, wheel off only to find I needed a 9mm not a 7mm as described. Mine’s a 535d.
God video, thanks man 👍🏻🤩
Where can I get ista + c from ?
👌🏻
What is the fuel consumption in city, i am planning to buy f10 lci 530d rwd and i want to know how much is the consumption. Can i afford the 3.0d or i will must buy a 2.0d
I had a 2011 530d and now have a 2017 520d. I averaged 8,5 on the 530 and now 6,3 with the 520d. Do about 40k km per year, mostly highway. U should add easily 1,5-2 litres for city traffic
7L to 9L/100km average
👍
Nice vid, can you tell me where've you got the BMW software you used in the video?
ISTA-D, Find on MHHAuto
@@FrancescoGalante91 Thanks
Great video! After replacing the brake pads and discs, I cannot reset the service light for the front brake pads. Do you know this problem! 😮
Si no cambias el sensor de desgasto no puedes realizar el reset
New brakepad sensor.
is there any other way to do the rare brakes without the software?
Yes, I do mine without the software and it can be done manually using a ratchet/socket to screw the piston out to the service position. Just google it online and there are a couple of videos on the procedure, I think Bavarian Auto has a video on it that is pretty good even though they no longer are in business.
Che differenza c'è tra i dischi monolitici e gli altri che hanno i rivetti?
Quelli rivettati sono più leggeri ma anche più soggetti a sviluppare Vibrazioni con l'usura nel tempo, ad oggi ho percorso quasi 5 mila km con i monolitici e zero Vibrazioni! :) Saluti!
Invece la situazione e contrario! Ii dischi rivetatti hanno una maggiore dispersione di calore !
Io ho messo su dischi + pastiglie della bosch in due parti, e doppo 20milla km sono ancora perfetti!
Comunque le pastiglie della bosch, quelle posteriori non sono al livello di quelle originali bmw !
Come ti trovi con le pastiglie della meyle?
sono a quasi 5 mila km è mi trovo da Dio, il problema delle vibrazioni viene fuori solo con i rivettati proprio per le dilatazioni maggiori del alluminio della campana in 2 pezzi, con i miei dischi Mayle per ora tutto Perfetto ;)
@@FrancescoGalante91 vediamo se passa ii 10k ! Buone info cmq !
@@FrancescoGalante91 Come va con i dischi? Comunque leggevo che spesso le vibrazioni dipendono dall'usura dei cuscinetti ruota, che, se superano tolleranze, fanno oscillare disco e ne provocano ovalizzazione ...
Wheel torque value?
120nm
I replaced recently mine front brakes ATE 348x36mm.. i have much bigger caliper than you on my 530d..
ZaZa!
Ciao Francesco, prova ad effettuare il test del bicchiere sul copri motore come ho fatto io. Passa dal mio canale 👍
Use textar , for the next time 💪🏼
Here in Italy we have an excellence...Brembo , for disk and brake pads..😎😎
@@diycarmechanic587 Trust me, textar is like original bmw brake ..
@@bloodsbrother777 Normal textar or better epad version? Thank you!!
@@eL_aNcI i use normal Version.
Meyle is Good Brand like Textar ;)
Ciao Francesco, prova ad effettuare il test che ho fatto io sul copri motore ua-cam.com/video/bgbptPkDXYU/v-deo.html
Ciao, se hai vibrazioni di solito possono essere supporti motore o magari qualche iniettore sporco, poi il 245 e il 258 sono diversi
@@FrancescoGalante91 non credo siano i supporti, comunque i motori sono simili. La tua ha l adblue ed è euro 6. Complimenti per la tua manualità, in questo modo si risparmiano tanti soldi. 👍
Wtf with the music?
Is this video mirrored?