We have the grey one. And we love this car. Now we want the red bit it’s in backorder by Axial. Everybody loves this car. It is also a really great car. We cann’t wait to personlize this thing😍
🤣 Klein makes good stuff. I have some screw drivers and a multimeter. Wasn’t aware they made a foldable utility knife for everyday use. Thanks for watching. P.S. I’m a Dewalt guy. 😉
Hola muy buenas tu hunboxing de este jeep va a estar muy interesado en las mejoras que hagas en este coche así que me suscribiré para verlas, creo que el driver tiene que ser de 6 pulgadas no crees? Les mando un saludo desde Argentina!!
I noticed the body on these don't sit all the way down on the left side. You will see just ahead of the drivers door where there is a gap between the black plastic at the back of the fender and the sliders. The right side sits all the way down. I traced it down to the strap holder on the left edge of the left side battery tray hits the underside of the drivers door sill. I trimmed about 1/8" off the the strap holder and now the body sits all the way down on both sides.
Buongiorno. Scrivo per chiedere un consiglio sulla batteria per la Axial SCX10 III Jeep CJ-7. Sul sito c’è scritto “Needed to Complete: 2-3S LiPo Battery with EC3 or IC3 connector”. Sul sito ci sono 2 batterie consigliate. Su "2S Completion Guide" c'è la "Spektrum Smart G2 Hardcase LiPo Battery IC3 5000mAh 7.4V 2S 50C". Su "3S Completion Guide" c'è la "Spektrum Smart G2 Hardcase LiPo Battery IC3 5000mAh 11.1V 3S 30C". - Praticamente nell’utilizzo cosa cambia tra "7.4V" e "11.1V"? - Praticamente nell’utilizzo cosa cambia tra "2S" e "3S"? - Praticamente nell’utilizzo cosa cambia tra "30C" e "50C" e "100C"? - Come si fa a capire quale batteria è più indicata? - Quale batteria consigliate per la Axial SCX10 III Jeep CJ-7? Grazie. Luca
I’m not sure. You could probably get better low end control by going brushless. Not sure how much runtime you’re looking for. I can get hours out of a 3S 5000mah. Thanks for the question.
Happy New Year 🎉 Thanks for everything in 2023. Let’s make 2024 even better.
Thank you for introducing me to a great car! It's a great video.~~~^_^😮😅😊
Thank you for watching my videos and commenting. It’s appreciated. Happy New Year.
Love the old toolbox. Got one just like it from my dad. Built them years ago at Waterloo Industries.
Hey thanks! I got mine from my dad who go it from my grandfather. Great box. Thanks for watching.
Happy New Year! I got the grey one and love it. New to your channel just subbed.
Happy New Year! This is a great RC. Welcome to the channel. Thanks for the sub.
We have the grey one. And we love this car. Now we want the red bit it’s in backorder by Axial. Everybody loves this car. It is also a really great car. We cann’t wait to personlize this thing😍
It’s certainly a great RC. One of my favorites for sure. Thanks for the comment. I appreciate it.
You had me all the way till the Milwaukee Fastback 😢 Kleins where it’s at man
🤣 Klein makes good stuff. I have some screw drivers and a multimeter. Wasn’t aware they made a foldable utility knife for everyday use. Thanks for watching. P.S. I’m a Dewalt guy. 😉
Hola muy buenas tu hunboxing de este jeep va a estar muy interesado en las mejoras que hagas en este coche así que me suscribiré para verlas, creo que el driver tiene que ser de 6 pulgadas no crees? Les mando un saludo desde Argentina!!
Thank you so much. Welcome to the channel.
I noticed the body on these don't sit all the way down on the left side. You will see just ahead of the drivers door where there is a gap between the black plastic at the back of the fender and the sliders. The right side sits all the way down. I traced it down to the strap holder on the left edge of the left side battery tray hits the underside of the drivers door sill. I trimmed about 1/8" off the the strap holder and now the body sits all the way down on both sides.
I haven’t noticed that. I’ll take a closer look. Thanks for watching and the comment.
Picked one up in gunmetal last night👍🏽
Very cool!
Happy new year! Do you know if the transmission is locked in first or second gear?
I’m assuming 2nd gear. I have plans to remove the dig and make it a 2 speed so I’ll know for sure soon. Thanks and Happy New Year.
Buongiorno.
Scrivo per chiedere un consiglio sulla batteria per la Axial SCX10 III Jeep CJ-7.
Sul sito c’è scritto “Needed to Complete: 2-3S LiPo Battery with EC3 or IC3 connector”.
Sul sito ci sono 2 batterie consigliate.
Su "2S Completion Guide" c'è la "Spektrum Smart G2 Hardcase LiPo Battery IC3 5000mAh 7.4V 2S 50C".
Su "3S Completion Guide" c'è la "Spektrum Smart G2 Hardcase LiPo Battery IC3 5000mAh 11.1V 3S 30C".
- Praticamente nell’utilizzo cosa cambia tra "7.4V" e "11.1V"?
- Praticamente nell’utilizzo cosa cambia tra "2S" e "3S"?
- Praticamente nell’utilizzo cosa cambia tra "30C" e "50C" e "100C"?
- Come si fa a capire quale batteria è più indicata?
- Quale batteria consigliate per la Axial SCX10 III Jeep CJ-7?
Grazie.
Luca
Is it worth changing to brushless with separate receiver and ESC? More run time?
I’m not sure. You could probably get better low end control by going brushless. Not sure how much runtime you’re looking for. I can get hours out of a 3S 5000mah. Thanks for the question.
To be honest I would use the console for the power button
Certainly not a bad idea. I never understood by companies didn’t make the power button accessible with the body on and ready to go.
I got one I wanna put a driver and passenger but don’t know who I wanna put in it
Nice! The sizing is kinda tough with this one. It probably won’t be “who” you want it will be the one that fits. Thanks for the comment.
@@toeshifter np bro I’ll try to find one lol and looking forward to seen. More videos of the jeep
Put weed in the center console
Hey toeshifter
Hello. Happy New Year!
@@toeshifter how are you
@@jeremynguyen2346 Cannot complain. Doing well.
@@toeshifter good 👍 is 2024 going to be good than last year
@@jeremynguyen2346 I certainly hope so
Eww, you let it touch that traxxas mat. Yuck
We like a lot of RC’s here.