Thank you very much for your explanation, it helped me a lot when I was thinking of throwing it away because none of the videos I watched gave me the solution. In my case, I used a straw and it started working automatically, it was spectacular, you have helped me recover my coffee maker.🎉
You saved the day I've watched videos for 3 hours before finding yours. I'd just cleaned my Keuring then it wouldn't pump all the sudden. I know the idea of deposits could be the issue I had no idea how to fix it. Thank you so much.
I was able to do it with the compress air gun, no turkey baster. Once I did it, I started it up and steam was overflowing and greenish sand came out with copious amounts of water, very dramatic and worth the admission price. Bottom line it’s fixed. Thank you!
Just 5 min ago I did what you recommended to blow off that valve. Now it works again. I tried another video which I found before yours and the gentleman recommended opening the machine and resetting the thermostat. It was very painful to open the back of the machine. I reseted thermostat but that was not a problem. Thank you very much.
This worked great for us! It would start pumping. stop. Start pumping again. Stop. Then Various light flashing. I usually throw the keurig away at this point and get another one. I cleaned the needle valve out with a paperclip and it worked for a couple of days. Clogged again and we found your video. Used a piece of tubing that would fit over the intake hole and pinched it closed around the air nozzle. Wow. The junk it blew out was amazing. It’s Working like new again! Thank you!
I wasn’t as lucky. Squeezing the rubber part didn’t work. I took it out and blew in it and when it finally broke through water went all over me. Saved $150 to buy a new one!!! Thanks!!
Yay this worked I didn’t have this model or a turkey baster but I just pushed the button down a few times and ran the faucet lightly over it and finally worked. Only had this two weeks and haven’t been able to use it in months but finally had a few min to mess with it
Thank you so much. I had not used mine in quite some time, and when i went to use it, hot water would only cyle into the reservoir. I grabbed a long straw and blew into the bottom of the machine, and was able to clear the clog. The only issue was after i got the flow back, it almost overflowed. So i put in just enough water to fill my cup, and it was fine. I'm hoping to try it again tomorrow to see if the fill rate goes back to normal. In any case, THANK YOU SO MUCH!!!!
Thanks for sharing, got my keurig working again, I just put the turkey Baster flush and gave a few quick squeezes and it cleared it up, now have water flow.
Thank you! My moms standard coffee pot quit on her, so i broke out my Keurig for her to use. I hadn’t used it in close to a year, so when i went to descale it, it wouldn’t pull any water. She took a straw from a reusable plastic cup, blew into there, and it worked like a charm!
COFFEE COMMY, I think you nailed it. That will fix all those K DUOs sitting in boxes all across America. I'll be digging mine out this weekend. This will fix it. Thanks.
This helped with my k express. I didn’t have a squeezer but I had a metal straw and I covered the hole with my fingers. Not a perfect seal but enough to clear the clog.
Not pumping water. Took two screws out. All clear. But, the area behind where the tubes are, are all hot!! Checked the needle with paper clip, all good. Now what do I do?
So of course my model looks nothing like yours, so I’m basically going to make 5 trips to Home Depot to try to fix this spending more money on stupid tools that I’ll never use again.
Seems like chinese electronics in these are just made to fail so we have to keep buying. Next time I run across one of those old American made chrome plated percolators I am buying it!
thank you very much! i’ve tried everything until this video showed up, you’re amazing!
Used a straw. Fixed in a heartbeat. You are a champion!
Thank you very much for your explanation, it helped me a lot when I was thinking of throwing it away because none of the videos I watched gave me the solution. In my case, I used a straw and it started working automatically, it was spectacular, you have helped me recover my coffee maker.🎉
That worked for me perfectly, just a warning, make sure there is no hot water inside, especially if you are using an air compressor. Thanks sir
Dude you are a lifesaver
Great video. Also, you can siphon on the elbow that attaches about the top needle! Strength in numbers my fellow coffee drinkers!!!!
You saved the day I've watched videos for 3 hours before finding yours. I'd just cleaned my Keuring then it wouldn't pump all the sudden. I know the idea of deposits could be the issue I had no idea how to fix it.
Thank you so much.
Funny I just did a maintenance descale and cleaning , and two days later it stopped pumping . Guess I’m going to try compressed air next .
I was able to do it with the compress air gun, no turkey baster. Once I did it, I started it up and steam was overflowing and greenish sand came out with copious amounts of water, very dramatic and worth the admission price. Bottom line it’s fixed. Thank you!
Just 5 min ago I did what you recommended to blow off that valve. Now it works again. I tried another video which I found before yours and the gentleman recommended opening the machine and resetting the thermostat. It was very painful to open the back of the machine. I reseted thermostat but that was not a problem. Thank you very much.
This worked great for us! It would start pumping. stop. Start pumping again. Stop. Then Various light flashing. I usually throw the keurig away at this point and get another one. I cleaned the needle valve out with a paperclip and it worked for a couple of days. Clogged again and we found your video. Used a piece of tubing that would fit over the intake hole and pinched it closed around the air nozzle. Wow. The junk it blew out was amazing. It’s Working like new again! Thank you!
I wasn’t as lucky. Squeezing the rubber part didn’t work. I took it out and blew in it and when it finally broke through water went all over me. Saved $150 to buy a new one!!! Thanks!!
Yay this worked I didn’t have this model or a turkey baster but I just pushed the button down a few times and ran the faucet lightly over it and finally worked. Only had this two weeks and haven’t been able to use it in months but finally had a few min to mess with it
This worked perfect for me. Thank you!
Thank you so much. I had not used mine in quite some time, and when i went to use it, hot water would only cyle into the reservoir. I grabbed a long straw and blew into the bottom of the machine, and was able to clear the clog. The only issue was after i got the flow back, it almost overflowed. So i put in just enough water to fill my cup, and it was fine. I'm hoping to try it again tomorrow to see if the fill rate goes back to normal. In any case, THANK YOU SO MUCH!!!!
Thank you!! This worked perfectly for me! I used a straw and plastic wrap. 😊
Thanks for sharing, got my keurig working again, I just put the turkey Baster flush and gave a few quick squeezes and it cleared it up, now have water flow.
THANK YOU! Used our mouth over the spout and some canned air and you just saved me a bunch of $$$.
Thanks a lot I managed to fix my machine thanks to you...cheers
I just tried this and it worked perfectly! I honestly thought that it wouldn't work at all lol!😅
Thank you! My moms standard coffee pot quit on her, so i broke out my Keurig for her to use. I hadn’t used it in close to a year, so when i went to descale it, it wouldn’t pull any water. She took a straw from a reusable plastic cup, blew into there, and it worked like a charm!
Great job! Love those videos that cover problems like this. Thank you!
Glad it was helpful!
COFFEE COMMY, I think you nailed it. That will fix all those K DUOs sitting in boxes all across America. I'll be digging mine out this weekend. This will fix it. Thanks.
This helped with my k express. I didn’t have a squeezer but I had a metal straw and I covered the hole with my fingers. Not a perfect seal but enough to clear the clog.
Not all heroes wear capes. Thanks!
Thank you! It worked!
This fixed it for me, i was going to throw it away
Another option that I have used is to use a nebulizer hose. If you have one, you know what I’m talking about.
Thank you!!! It worked!!!
Worked for me thanks!!
Thanks!!!
Not pumping water. Took two screws out. All clear. But, the area behind where the tubes are, are all hot!! Checked the needle with paper clip, all good. Now what do I do?
Just spent $184 for a new Keurig. Then I saw this. Keurig Manual says "no user parts replaceable". But why not mention this simple fix?.
Thank you.
My Keurig Duo keeps saying add water. What is up?
As a pump I inserted the hose from spray bottle and squirted
Did not work for me. I’ve watched countless videos on how to get the water to flow, all to no avail. Guess I’m dumping it in the garbage.
So of course my model looks nothing like yours, so I’m basically going to make 5 trips to Home Depot to try to fix this spending more money on stupid tools that I’ll never use again.
Seems like chinese electronics in these are just made to fail so we have to keep buying. Next time I run across one of those old American made chrome plated percolators I am buying it!