INK System - Wall/ceiling installation

1) To create the path, fix the extruded material to the wall or ceiling. The system allows orthogonal direction changes, using the various fittings. To calculate the correct position and distance between one extruded product and the next, use the supplied template and place it laterally between the ends of the extruded products.
2) Once the extrusions have been arranged, position the cable sections properly cut. The rubber cable is then connected by inserting the hollow part into the extruded part, which acts as a rail. No accessories or fixing systems required. The cable can be removed just as easily as it can be inserted.
3) The connection is made by inserting the fitting: push the joint piece making sure that the pin plugs grip at both ends and fit correctly into the rubber.
4) INK System allows the continuation of light paths on different levels, with the possibility of connecting wall and ceiling or two contiguous walls. To do so, fix the two extrusions while maintaining a distance from the angle of 4cm.
5) Insert the rubber cable as per procedure, pressing on the strip until the hollow part along the extruded track is inserted.
6) Follow the natural inclination of the strip along the corner and continue with the insertion of the cable. The flexible material allows you to create an angle easily and safely, without having to cut or break the cable.