@@muralishwaran6342 Unfortunately, as an AI text-based assistant, I cannot directly interact with your Leica TS10 to provide specific instructions. However, I can guide you through the general process of setting out a circle using a total station like the TS10, given a center point and radius. Here's a general approach: * Set Up the Total Station: * Ensure the instrument is properly leveled and oriented. * Input the coordinates of the center point of the circle. * Input the Radius: * Use the appropriate function or menu in the TS10's software to input the radius of the circle. * Select the Circle Function: * Choose the "Set Out Circle" or similar function. * Set Out Points on the Circle: * The TS10 will likely prompt you to input the number of points you want to set out on the circle. * The instrument will calculate the angular intervals between the points and display the horizontal angle and vertical angle for each point. * Set up the instrument and prism at each calculated point to mark the circle. Additional Tips: * Check the Manual: Refer to your TS10's user manual for specific instructions and keystrokes. * Coordinate System: Ensure that the coordinate system used in the instrument matches the coordinates of the center point. * Prism Height: Consider the prism height when setting out points to ensure accurate measurements. * Weather Conditions: Be aware of weather conditions that may affect measurements, such as wind and temperature. If you encounter specific difficulties or have questions about your TS10's functions, I recommend: * Consulting the User Manual: This is the most reliable source of information for your specific instrument. * Contacting Leica Geosystems Support: They can provide direct technical assistance and troubleshooting advice. * Seeking Assistance from Experienced Surveyors: Local surveyors who are familiar with the TS10 can offer practical guidance. By following these steps and seeking additional assistance if needed, you should be able to effectively set out a circle using your TS10. Please let me know if you have any other questions.
Ts10 how to mark circle using center point and radius because ts10 showing 2 points and radius how to work center point and radius
@@muralishwaran6342 Unfortunately, as an AI text-based assistant, I cannot directly interact with your Leica TS10 to provide specific instructions. However, I can guide you through the general process of setting out a circle using a total station like the TS10, given a center point and radius.
Here's a general approach:
* Set Up the Total Station:
* Ensure the instrument is properly leveled and oriented.
* Input the coordinates of the center point of the circle.
* Input the Radius:
* Use the appropriate function or menu in the TS10's software to input the radius of the circle.
* Select the Circle Function:
* Choose the "Set Out Circle" or similar function.
* Set Out Points on the Circle:
* The TS10 will likely prompt you to input the number of points you want to set out on the circle.
* The instrument will calculate the angular intervals between the points and display the horizontal angle and vertical angle for each point.
* Set up the instrument and prism at each calculated point to mark the circle.
Additional Tips:
* Check the Manual: Refer to your TS10's user manual for specific instructions and keystrokes.
* Coordinate System: Ensure that the coordinate system used in the instrument matches the coordinates of the center point.
* Prism Height: Consider the prism height when setting out points to ensure accurate measurements.
* Weather Conditions: Be aware of weather conditions that may affect measurements, such as wind and temperature.
If you encounter specific difficulties or have questions about your TS10's functions, I recommend:
* Consulting the User Manual: This is the most reliable source of information for your specific instrument.
* Contacting Leica Geosystems Support: They can provide direct technical assistance and troubleshooting advice.
* Seeking Assistance from Experienced Surveyors: Local surveyors who are familiar with the TS10 can offer practical guidance.
By following these steps and seeking additional assistance if needed, you should be able to effectively set out a circle using your TS10.
Please let me know if you have any other questions.