VLOG EN: LOST VAPE QUEST MAINBOARD DISASSEMBLY / TEARDOWN TOPOLOGY POWER REGULATOR
Вставка
- Опубліковано 7 вер 2024
- (ENGLISH)(MANUAL CLOSED CAPTION)(SCRIPTED)
(STEREO)(BUILT-IN MIC)(HORIZONTAL)(4K)(08/22)
Maybe i starting this video with less cheerful, it could be a rough day. But electronics always make me excited again (starting from 1:30) and bring happiness back to the maximum level at the end of the video.
#lostvape
#questchip
#articfox
#widyahong
Consider supporting me on:
PayPal, GoPay, ShopeePay, Ovo, Dana, LinkAja
6285156623477
Read the video description at:
widyahong.com/
Website:
widyahong.com
wictmgs.com
Tokopedia:
tokopedia.com/...
Shopee:
shopee.co.id/w...
Update on video description. If necessary, you can tag @widyahong in the sub-comments so i can read it. This video has been added with a manual closed caption. You can activate it into your native language by using the auto-translate feature.
Beautiful
Hi @widyahong ! Have you ever disassembled centaurus Q80? Tear down advices without destroying it would be very usefull 😅
No, but many device
any chanels for repair early ecigs like vamo?
Hi guy. Can you make a clip about charging board of pod system and vape. And can i connect with you. Wait for your anwser. Best regard.
Hello, sadly i cant because every device is different, take to much time but help several people only, but majority 1 cell device have linear charging chip (without inductor and low current capability) or switching buck converter (synchonous or just diode) if the device have more than 1 cell it will use switching boost converter. Majority have input, output, and status (to mcu) pin. To fix it you can get out all fail components and build external if there any space or fix it by look at diagram from typical aplication on datasheet just search datasheet on google by typing chip model. Dont search a whole schematic because you wont get it.
@@widyahong thank u so much. And you have facebook?
@@user-rv8df7ie7o yes but for personal use only and i dont really use that, anyway you can contact me by searching widyawan14 on facebook and send a message. are you fix for business or your own? because for fix it you need multimeter, power supply, and hot air solder..
@@widyahong i have everthing to do, but i have some promblem need to ask you.
@widyahong I have a similar lost vape centaurus quest bf100.
The firing button is not working I already checked the contacts and it's OK but still can't fire the device
Are you use original firmware or articfox? So the device is turn on? If you press power button there are message on display or just puff time and wattage annimated? Its liquid damage like corrosion? Are you have multimeter?
@@widyahong when I put the battery its straight main screen watt/puff count.
I'll double check it if its liquid/juice leak that might corrode some parts
@@niwrad84 Hi there, do you have any solution for this problem? :)
@@widyahong Hi, do you know which leg is of the fire button on the STMicro? Thank you in advence.
@@RolandOkros-hx7zq im sorry i dont have vaping device again, there are information at articfox firmware forum but this year the site is dead, but you can check with dc volt and continuity mode, normally this button is pull down mode so normally this button have 3.3 volt and 0 volt if pressed, but if you have connection problem its hard to do that thing because stm maybe just sense without activate internal pull up function, before you do, are you finish check stm 3.3 volt before to make sure stm have voltage? there 3 diode with 1 ldo to power 3.3 volt peripheral.
Tutorial instal articfox nya dong 😁
Sempet videoin tapi lupa simpen haha, kalo lostvape videonya ada di channel youtube smocking maniac cuma dia pake bahasa asing bukan inggris tapi ada subtitlenya. Bisa main2 juga ke forumnya nfeteam.
Hello, I have a Centaurus Quest BF, the select button (middle button) has stopped working. Do you know what the problem could be?
Removing the button from the board and testing it is doing the job normally.
I apologize for the English, I'm from Brazil and I'm translating through Google
Hello 👋 before going to microcontroller the button output goes into resistor pull down/pull up and capacitor debouncer, resistor may go open or close circuit, the capacitor may be shorted. Resistor need to be replaced but for capacitor you can replace or just get it without replace. Last microcontroller pin may have bad contact, for pin out you need go to articfox firmware forum nfeteam.org at lost vape sub forum. To do you need multi meter with beeper/diode tester/ohm terster and solder iron. Good luck. Lost vape devices have 3 month warranty.
hi i have a centaurus m200, do you think i can change somehow the screen interface? i tried with escript but it didn’t work
Sadly as i know no other firmware for that device, articfox firmware is dead, stuck on stock firmware.. lol, its escribe not escript i google to figure what its haha, escribe only for evolv dna mainboard not lost vape quest mainboard..
really can be reflashed using NFE to arcticfox? cool, i may need this, my istick pico lcd just gave up on me lol
Yes of course, almost lost vape mod can use articfox, the mainboard and body is good.. You can check the forum and see the pinned at first post to see model compability..
please istick picoo !!!
In today common chinese mod have likely same topology, buck boost converter for 1 cell battery and buck converter for 2 series cell battery
Bisa servia gpu juga dong bang?
Kalo cuma masalah power aja sih bisa, kalau butuh reflow/reball peralatan2 soldering saya kurang akurat, sejauh ini hanya hobi saja, kalo agan punya peralatan/bisa service, boleh kok diskusi masalah gpu ini..