how to make GAD to isometric drawing in piping || piping course ||
Вставка
- Опубліковано 26 лис 2022
- To make isometric drawing from G.A.D drawing first we will see elevation
The elevation of the pipe in which the valve is attached is given by 2 meters.
And the line which is in rolling will also have an elevation of 2 meters.
The elevation of the line after the rolling pipe is given as 4 meters.
After that the line is going down by applying elbow
After that connection is being made with another pipe by putting an uniqual whose elevation is given
as 3 meters
The size of the pipe with which the connection is being made will be 6 inches and the pipe which is
in rolling will have a size of 4 inches.
Piping isometrics are the three-dimensional representation of the line.
The main purpose of an isometric is to provide all information necessary for the fabrication and erection along with the bill of material required to do so.
Isometric is also used to work out the exact MTO requirement.
Generally, isometrics are prepared/extracted by the design group.
A draft person (designer/engineer) who knows to read the piping GA. and conversant with a drafting tool can draft isometric.
#intervew #pipefabricatorinterviewquestionsandanswers #pipingengineering #course #engineering
Sir pls chiller mein subcooling and superheating kya hota hai is ke uper ek video🙏🙏
Inshallah aaj bnaa dunga kaise bhi 🙂
@@skuslearningadda ok thank jaldi banaana Bhai
@@mohammedmohsin8064
subcooling and superheating - ua-cam.com/video/kA5vcZih7iQ/v-deo.html
sorry for late ,
☺