It will fit sir! Needed a new duty holster for my G45 & TLR1 and had trouble with different holsters. Local police store recommended the G17 holster , and I was like it won’t fit. Fit like a glove! Perfect retention and use. I absolutely love it.
@@2centsbear638 supposedly and it’s bs cause I got a G17 G5 for my birthday and behind the holster it says it fits the 17-19-34 Gen5 and it doesn’t fit my G17 G5 in it
If you’re going in to a store to buy it just look on bottom of package on the label it’ll tell you which lights it supports I have the 7378RDS and it supports the surefire x300 , should be good with yours.They support multiple tactical lights.
It fits all double stack Glock 9mm’s. Picked up the 7376RDS-68325 for my 34 gen4 to run w/ a Swampfox Justice & TLR1-HL. Not only does it work w/ all my Glock 34’s, 19’s, & 17’s, it works w/ a dozen diff lights too. As if that wasn’t awesome enough, there’s more: it’s got 2 different available ride heights to choose from for mounting (the 6 series only has one w/ model numbers indicating ride heights: 6360 rides higher than the 6378, etc), is Made In America (not “assembled in Mexico”), has pre drilled holes for installing an SLS in addition to the ALS (if that’s your thing), and the SafariSeven does not mar/scratch your blaster, optic, or light (my 6378RDS’ beat the hell outta my lights). I had been running a bunch of 6378RDS & 6360RDS’ for yrs, but after getting the 7376RDS-68325 & putting it through its paces I think it’s superior to the 6 series holsters in every way. I was hesitant to try it, however. 2 yrs ago I bought a 7378-73 for 1913 railed Berettas & it was the worst ALS holster I’ve ever used (awful on the draw… would catch & hang up on the ALS beating the hell out of my sights & frame). But the 7376RDS-68325 is a 10 out of 10 for me. Very curious to see if other 7376’s stack up. Congrats on the holster!!! 🗽🫡🇺🇸⚔️🏴☠️
I'm gonna get one of these, thanks. Planning on comping my G19 at some point, knowing it fits 34 length slides is huge. I was dead set on a 6354RDS until I read your comment
@@tonyb282 I bet they will, there's a channel down the middle of the holster's inside for the front sight to slot in, and the optic cover should give enough room for the rear sight.
Just received mine for the p320. Considering making a video myself to go a little more in depth regarding suppressor height sights. Great video though. You just earned another subscriber.
This appears to be a sort of universal fit holster? Just went through the holster finder entered my info: CZ P10c, 507C with a X300U and this model appeared among others...is this correct?
Could be the gen issue. Before I bought this one, I had bought another safariland holster and the gen 5 became an issue with my gen 4. Local store said it would fit and wouldn’t be an issue but mines was very very tight. Wouldn’t work for duty use. As for this one, I’ve had 0 issues. My G45 is a gen 5 naturally and just short than the 17. So im not sure what the issue would be with this holster in specific. Have a coworker who has gen 5 17 in this same holster and no issues at all.
Thanks for uploading! Did this holster advertise as a tlr1-HL holster? Just ordered a7376 designed for a g19 with x300 and I’m hoping my tlr1 will fit.
On Amazon the description for mine was "GLK19 GEN1-5 Surefire X300U", and it certainly fits my TLR-1. It actually doesn't lock up on the light at all, and the X300 and TLR-1 are so close it doesn't seem to be a problem. I don't think the models with lasers or grip activation switches will fit though.
Another thing to add, this holster locks on the firearm, not the light. So as long as the light fits you will be all good. I have one for my 19 now and it locks in without the light. Buying a second for my 45 with RDS and X300u
So I'm trying to wrap my head around this, basically you made a UA-cam video asking if your Glock19 with an RDS will work in a Holster designed buy Safariland specifically for a Glock 19 with an RDS?
The details & description of the holster are highly ambiguous from Safariland. I ordered the 7376RDS-68325 for a 34 gen 4 with an optic & light… Upon receiving the holster I realized it’s specifically designed to work with and fit any Glock 17, 19, or 34 with just about any red dot and any WML. And it’s the exact same size as my 6378RDS for my 19 with a TLR1-HL. That’s what’s so amazing about the holster. It works with almost anything and fits them all superbly. Since the ALS locks onto the ejection port, they figured out a way to get 19’s & 17’s to lock in perfectly w/o needing to use the muzzle nub the 34 does. I’ve used 6378RDS’ & 6360RDS’ for years on various makes and models and the 7376RDS-68325 is better than all of them. Also comes drilled for your choice of mounting for mid ride or low ride, comes pre drilled to add an SLS in addition to the ALS if you need/want it, and is Made In The USA (not assembled in Mexico). Can’t recommend the holster enough.
You can take the small hinged door off and it comes with 3 options: the cover you see, a larger one for something like a Acro P-1, and a little place holder plug/roller if you didn't want any kind of door at all or you have an optic larger than either door will allow. The actual non-articulating protective lump on the top of the holster body is not removable. Hopefully that makes sense!
@@joshuawong8882 Yep, it absolutely will. My gun in the video is a touch weird because its a Glock model 45 frame with a Glock 19 marked slide, but the only difference between the 19 and the 45 is a slightly longer grip. The dimensions of the frame that interact with the holster are identical. On a related note the reason the gun is weird is because I have a Glock 19 with no light mounted but a red dot, and a a Glock 45 with a light. That way I can mix and match the slides and frames depending on what I want between a smaller pistol with no light or red dot, a smaller pistol with a red dot, a larger pistol with a light, and a larger pistol with a light and a red dot.
The Glock 19/45 model certainly will not fit a 45 with an extended barrel. It needs the distance from the end of the barrel to the ejection port to lock up on, so if your barrel is extended, threaded, or comp'd in any way that increases the factory 19/45 barrel length in any way, its a no go. If your extended barrel brings it up to the length of a Glock 17, you might be able to get away with a Glock 17 model though, but I would think it needs to be within a few millimeters of Glock 17 length to work.
@@southernshotsfired5552 just got mine . Fits my Glock45 with threaded barrel like a glove 👍. It does say g17 or 4.5 inch barrel in the box. Holosun Vulcan 507c fits perfect too! Feels a little plasticy, but great retention.
@@lztblztb5042 Cool! I love the retention on all of the Safariland ALS holsters. Once in a blue moon I'll miss the thumb break on a draw, and there's no way the gun is coming out; I think I would strip the screws and rip the holster from the mounting plate before the gun accidently came out. I've seen at least two competitors get DQ'd at shooting matches from pistols flopping out of holsters with poor retention, so it's something I always worry about. Plus I've done some Run and Gun 5k matches where I'm up to my neck in a muddy creek or low crawling through sand, and they let the water drain quickly, keep the gun reasonably clean, and I've never had the sand cause them to bind up. If I had one feature I wish they were able to pull off it would have been making the holster work with any length slide or barrel they way the non-light, non-optics cut Safairlands do, but you can't have everything!
I don't have a Surefire, so I can't be 100% certain, but I don't think so. Once the pistol rocks into the holster it seems very tight under the trigger guard, and I just don't see the switch being able to have enough room to fit. It's a shame too because I don't think there's a mechanical reason they couldn't have given a touch more clearance there.
I just received a version of this Safariland holster from Amazon, after ordering a completely different Safariland holster for a S&W Shield Plus. Apparently Amazon put the wrong inventory code on the package. On the back of the holster itself it's labeled for a Gen 5 Glock 17/19/34 with light and optical sight. Not even remotely what I needed, but that's Amazon for ya. ¯\_( ͠° ͟ʖ °͠ )_/¯ On the plus side, it's a really well made rig for the money, so if I ever get a full size Glock or S&W pistol and want a retention holster I'll definitely order one of these. The mistake gave me an opportunity to see how Safariland's vaunted retention devices work, and it's darned clever and ergonomically friendly.
This is wild speculation because I don't have any experience with the TLR-8A, But I don't think so. It looks like the bump for the laser is just long enough that it would cause some interference issues inside the holster. But again that's a wild guess, sorry!
It will fit sir! Needed a new duty holster for my G45 & TLR1 and had trouble with different holsters. Local police store recommended the G17 holster , and I was like it won’t fit. Fit like a glove! Perfect retention and use. I absolutely love it.
Thank you for showing me the whole plug system, helped me save money by not getting multiple holsters for 19s 17s and 34s
So if you have the 34, you could fit all three of those in there?
@@2centsbear638 supposedly and it’s bs cause I got a G17 G5 for my birthday and behind the holster it says it fits the 17-19-34 Gen5 and it doesn’t fit my G17 G5 in it
@@vicentemendoza1668 probably have to pry the barrel stopper out. I think it pops out with a flathead, but maybe watch a video or 2
@@2centsbear638 I could do it but I feel like I’m gonna f*** it up
Is this the holster for the x300 sure fire? Or specifically for the tlr1
If you’re going in to a store to buy it just look on bottom of package on the label it’ll tell you which lights it supports I have the 7378RDS and it supports the surefire x300 , should be good with yours.They support multiple tactical lights.
It fits all double stack Glock 9mm’s. Picked up the 7376RDS-68325 for my 34 gen4 to run w/ a Swampfox Justice & TLR1-HL. Not only does it work w/ all my Glock 34’s, 19’s, & 17’s, it works w/ a dozen diff lights too. As if that wasn’t awesome enough, there’s more: it’s got 2 different available ride heights to choose from for mounting (the 6 series only has one w/ model numbers indicating ride heights: 6360 rides higher than the 6378, etc), is Made In America (not “assembled in Mexico”), has pre drilled holes for installing an SLS in addition to the ALS (if that’s your thing), and the SafariSeven does not mar/scratch your blaster, optic, or light (my 6378RDS’ beat the hell outta my lights). I had been running a bunch of 6378RDS & 6360RDS’ for yrs, but after getting the 7376RDS-68325 & putting it through its paces I think it’s superior to the 6 series holsters in every way. I was hesitant to try it, however. 2 yrs ago I bought a 7378-73 for 1913 railed Berettas & it was the worst ALS holster I’ve ever used (awful on the draw… would catch & hang up on the ALS beating the hell out of my sights & frame). But the 7376RDS-68325 is a 10 out of 10 for me. Very curious to see if other 7376’s stack up. Congrats on the holster!!! 🗽🫡🇺🇸⚔️🏴☠️
I'm gonna get one of these, thanks. Planning on comping my G19 at some point, knowing it fits 34 length slides is huge. I was dead set on a 6354RDS until I read your comment
Do the 7000 series accommodate a pressure switch?
Perfect brother,, thanks for taking the time, On my way online to purchase, God speed!
Answered my question perfectly, thank you
Will it fit a threaded barrel?
Is this holster 'Molle' compatible? Thank you ahead of time, awaiting your answer.
Man, thanks for the video. I was having the same issue finding the same set up
I'm running a leupold delta point pro with a tlr 1 hl light. I have raised co witness sights. I have to check if it will work with those sights.
@@tonyb282 I bet they will, there's a channel down the middle of the holster's inside for the front sight to slot in, and the optic cover should give enough room for the rear sight.
You know it fits in a CZP10C OR SR with Trl7A?
Will it fit with a G45 with an SRO optic
Just received mine for the p320. Considering making a video myself to go a little more in depth regarding suppressor height sights. Great video though. You just earned another subscriber.
That red dot hood breaks very quickly, I have found.
I run this for duty but i cave the holosun 509t. the hood for it is loose and falls off easily. any suggestions?
Does this fit with trijicon bright and tough suppressor sights?
Was this holster discontinued?
Can this holster be used with a UBL OR QLS System on a duty belt? had to order this one cause it was the only one that came FDE.
Do they make a version of this exact holster with a hood?
if you are referring to the thumb hood, it comes with the holster and can be removed.
@@1dayatime785 I think he meant the SLS retention
Is it possible to remove the belt mount and replace it with a UBL?
Yes, or any mounting system that has the standard safariland 3-hole pattern for that matter
This appears to be a sort of universal fit holster? Just went through the holster finder entered my info: CZ P10c, 507C with a X300U and this model appeared among others...is this correct?
This seems to only fit my Glock
Has there been a break in period for yours that you have noticed?
Not for mines. Mines has fit perfect and used from day one. No issues.
doing the lords work with this video lol
Thank you
Fits reeeal tight on my glock 17 gen 5. Any way to loosen it up?
Could be the gen issue. Before I bought this one, I had bought another safariland holster and the gen 5 became an issue with my gen 4. Local store said it would fit and wouldn’t be an issue but mines was very very tight. Wouldn’t work for duty use. As for this one, I’ve had 0 issues. My G45 is a gen 5 naturally and just short than the 17. So im not sure what the issue would be with this holster in specific. Have a coworker who has gen 5 17 in this same holster and no issues at all.
* then gen 4 holster didn’t work well with my gen 5. Messed that part up
Thanks for uploading! Did this holster advertise as a tlr1-HL holster? Just ordered a7376 designed for a g19 with x300 and I’m hoping my tlr1 will fit.
This holster popped up on the Holster finder for me...CZ P10C. 507C and a X300u....seems like a sort of Universal style setup..
On Amazon the description for mine was "GLK19 GEN1-5 Surefire X300U", and it certainly fits my TLR-1. It actually doesn't lock up on the light at all, and the X300 and TLR-1 are so close it doesn't seem to be a problem. I don't think the models with lasers or grip activation switches will fit though.
Good to know and thank you for letting me know! Safariland holsters can be difficult to navigate
Another thing to add, this holster locks on the firearm, not the light. So as long as the light fits you will be all good. I have one for my 19 now and it locks in without the light. Buying a second for my 45 with RDS and X300u
So I'm trying to wrap my head around this, basically you made a UA-cam video asking if your Glock19 with an RDS will work in a Holster designed buy Safariland specifically for a Glock 19 with an RDS?
The details & description of the holster are highly ambiguous from Safariland. I ordered the 7376RDS-68325 for a 34 gen 4 with an optic & light… Upon receiving the holster I realized it’s specifically designed to work with and fit any Glock 17, 19, or 34 with just about any red dot and any WML. And it’s the exact same size as my 6378RDS for my 19 with a TLR1-HL. That’s what’s so amazing about the holster. It works with almost anything and fits them all superbly. Since the ALS locks onto the ejection port, they figured out a way to get 19’s & 17’s to lock in perfectly w/o needing to use the muzzle nub the 34 does. I’ve used 6378RDS’ & 6360RDS’ for years on various makes and models and the 7376RDS-68325 is better than all of them. Also comes drilled for your choice of mounting for mid ride or low ride, comes pre drilled to add an SLS in addition to the ALS if you need/want it, and is Made In The USA (not assembled in Mexico). Can’t recommend the holster enough.
Thanks
Can you take off the rds cover ?
You can take the small hinged door off and it comes with 3 options: the cover you see, a larger one for something like a Acro P-1, and a little place holder plug/roller if you didn't want any kind of door at all or you have an optic larger than either door will allow. The actual non-articulating protective lump on the top of the holster body is not removable. Hopefully that makes sense!
@@southernshotsfired5552 and this holster should fit a gen 5 Glock 19 with a tlr 1 ? Just confirming
@@joshuawong8882 Yep, it absolutely will. My gun in the video is a touch weird because its a Glock model 45 frame with a Glock 19 marked slide, but the only difference between the 19 and the 45 is a slightly longer grip. The dimensions of the frame that interact with the holster are identical. On a related note the reason the gun is weird is because I have a Glock 19 with no light mounted but a red dot, and a a Glock 45 with a light. That way I can mix and match the slides and frames depending on what I want between a smaller pistol with no light or red dot, a smaller pistol with a red dot, a larger pistol with a light, and a larger pistol with a light and a red dot.
You got a Glock the 6390rds fits it and is extremely common for glock
Thanx man
Absolute fucking chad right here.
Will it fit a Glock 45 with extended barrel?
The Glock 19/45 model certainly will not fit a 45 with an extended barrel. It needs the distance from the end of the barrel to the ejection port to lock up on, so if your barrel is extended, threaded, or comp'd in any way that increases the factory 19/45 barrel length in any way, its a no go. If your extended barrel brings it up to the length of a Glock 17, you might be able to get away with a Glock 17 model though, but I would think it needs to be within a few millimeters of Glock 17 length to work.
@@southernshotsfired5552 👌
@@southernshotsfired5552 just got mine . Fits my Glock45 with threaded barrel like a glove 👍. It does say g17 or 4.5 inch barrel in the box. Holosun Vulcan 507c fits perfect too! Feels a little plasticy, but great retention.
@@lztblztb5042 Cool! I love the retention on all of the Safariland ALS holsters. Once in a blue moon I'll miss the thumb break on a draw, and there's no way the gun is coming out; I think I would strip the screws and rip the holster from the mounting plate before the gun accidently came out. I've seen at least two competitors get DQ'd at shooting matches from pistols flopping out of holsters with poor retention, so it's something I always worry about. Plus I've done some Run and Gun 5k matches where I'm up to my neck in a muddy creek or low crawling through sand, and they let the water drain quickly, keep the gun reasonably clean, and I've never had the sand cause them to bind up. If I had one feature I wish they were able to pull off it would have been making the holster work with any length slide or barrel they way the non-light, non-optics cut Safairlands do, but you can't have everything!
will dg switch surefire fit ?
I don't have a Surefire, so I can't be 100% certain, but I don't think so. Once the pistol rocks into the holster it seems very tight under the trigger guard, and I just don't see the switch being able to have enough room to fit. It's a shame too because I don't think there's a mechanical reason they couldn't have given a touch more clearance there.
I just received a version of this Safariland holster from Amazon, after ordering a completely different Safariland holster for a S&W Shield Plus. Apparently Amazon put the wrong inventory code on the package.
On the back of the holster itself it's labeled for a Gen 5 Glock 17/19/34 with light and optical sight. Not even remotely what I needed, but that's Amazon for ya. ¯\_( ͠° ͟ʖ °͠ )_/¯
On the plus side, it's a really well made rig for the money, so if I ever get a full size Glock or S&W pistol and want a retention holster I'll definitely order one of these. The mistake gave me an opportunity to see how Safariland's vaunted retention devices work, and it's darned clever and ergonomically friendly.
The mistake you made was buying it from Amazon and not Safariland. your lucky you didn't get a Chinese knockoff
will it fit in G19 with a TLR - 8A?
This is wild speculation because I don't have any experience with the TLR-8A, But I don't think so. It looks like the bump for the laser is just long enough that it would cause some interference issues inside the holster. But again that's a wild guess, sorry!
@@southernshotsfired5552 Thx for the responed! Maybe I'll try some diff holsters.