I agree, they should be sold with LEDS right from the dealer. Ive been watching your channel. Good Work! its hard putting these videos together and working full time. I don't know how some of these guys do it. Thanks for the comment.
Between the headlights and the work lights its night and day. Im very happy with the results. Thanks for watching. Always look forward to your comments.
I was pumped to see you uploaded a new video. That kioti is pimped . Beer girl does the beer delivery better 🍻 😂. Good job Kyle looking forward to the next video .
The next video should be a good one. im looking forward to the next upgrade. Yea I can't compete with her. Thanks for watching buddy. sorry for the delay between videos. been a busy couple weeks
All nice mods. Well done. I have chosen to leave the headlights in my L2501 Kubota stock as I leave loader on. With the loader on they are shining the back of the bucket more than anything else. I do have a led light bar up on the rops and that makes a huge difference. I like the before and after shots that you did. Great job.
Thanks I appreciate it. Those led light bars are amazing. I agree with the headlights. They really dont do a whole lot of good with the loader on. Thanks for the comment.
Great, I wondered if you or anyone you know on here has ever replaced the entire headlight housing? I wanna do these LED's but i have to replace a cracked housing and cant find anything on how the are removed. Thanks
@@SpicerDesignsLLC Thanks, I'm getting it from my Dealer tomorrow so I wanted to put LED Bulbs in there as well. Are those OXILAM LED for the Headlights any good or would you say get other ones ?
Oh come on! They both have their strong points. Milwaukee definitely has a lot more tools. Once you get enough batteries your kinda stuck with that brand. Theyre so expensive. Thanks for the comment.
It's been my (40+ years) experience that bucket leveling indicators aren't used much. Asking an owner if they wanted to fix or replace one usually got "Scrap it". .Lower the loader in float while curling the bucket in. Take it off float when it's all the way down and start rolling the bucket out. When the bucket starts to lift the loader arms you're level. Or try the modern method - mount a backup cam to the front of your tractor..
I guess its all what you get used too. I prefer to use the indicator myself but that's just me. My next video is actually installing a touchscreen and rear camera. Should be up next Friday. Thanks for the comment!
I don't if you could pull off this up-grade, but I would like to place camera just below the roof, center front and a small screen monitor in the cab for visibility to the loader forks, bucket and grapple. It sure would increase productivity. Maybe you would have to place the camera on the elbow of the loader boom. If you could pull that off it would be great. I have the Bobcat CT5545 (Kioti 45 HP with cab)with a cab. I think a kit like that would sell. ...by the way, you're doing a great job. Thanks
Thats kinda crazy you mentioned that. My next video is going to be replacing the stock radio with a touchscreen and a rear camera for attachments. I believe you can add a front camera too. I should have that video up in the next week or so. All the parts showed up last week.
Thanks Brad. I did start looking at doing the Blinkers. I would like for everything to be LED. ill do that soon, not sure if ill make a video for it though.. IDK. thanks for the comment!
I am going to do the slice, but I am also going to remove the tube and mill small segmented windows it. (Small so you can't get your fingers in them) and paint the rod red or orange.
Looks like a great idea on the diagonal cut for the bucket level indicator. So I think I'd take the talking over the shorts in case your doing a pole......🤣🤣(probably shouldn't say pole....🤣) Much nicer to have the lights all the same color, something I need to do as well.
I can't take credit for it. John Deno in the comments suggested that. It works really well. Ya i don't stand a chance against the keystone girl.. You'll be glad to know those shorts are in the trash. Thanks for watching!
Hey Kyle I’m enjoying the tractor videos!! I’ll have a 2610 open station in few weeks from Robsons in WESTVILLE! We live on the outskirts of Michigan City near LaPorte. Hey what was name of those LEDs for the headlights again? Glad to see a NWI you tuber!! Thanks.
There are links in that led video for the lights and i can make you some z brackets as well. I charge $25 for a set. I was planning on making a couple kits for Matt to stock in westville.
a machine operator i know told me to spray paint on the rod and not cut it... then you can still have the whole rod, and maybe spray different colors as it gets close to level....
Ya thats not a bad idea. Theres all kinds of ways to do it. Once i cut the rod i was kind of stuck with it. The angled cut on the sleeve definitely makes it easier. Thanks for the suggestion
@@nate5456 i unfortunately deleted that video a while back. There were some things in it that I wasnt very happy with. I do still have the z brackets that i sell to get the leds to fit right. I will make another video on it this fall.
I couldn’t agree more. I dont think theres much adjustment after the initial cut. Theres a couple ways to set up that indicator. I just got the bucket level and cut the rod flush. Adding the angled cut made it a lot better.
One of my tractor's has a bucket level indicator rod on it and the other tractor does not but I found out. That the more you use your machine you will get used to where the bucket is you will not even worry about a bucket level indicator that's actually a waste of money I think. Nothing feet practice and experience running gear machine
Ya i can see where your coming from. At the end of the day its a preference thing. I prefer to use it. Ive gotten used to it and it came on the tractor when i bought it. It comes in handy with most of my projects. Thanks for the comment!
Getting under the hood to access those headlights is no easy task. i am a big dude and not looking forward to swapping out mine to LED. I know it will be worth it though!!
That's exactly how to cut that pipe on the bucket level indicator, good job. I'm going to checkout those lights.
I appreciate the idea. Thanks again. it is night and day difference.
Amazing difference that those new lights make!
I agree, they should be sold with LEDS right from the dealer. Ive been watching your channel. Good Work! its hard putting these videos together and working full time. I don't know how some of these guys do it. Thanks for the comment.
@@SpicerDesignsLLC It makes a good hobby
Did the same thing to my LX3310, thanks for the video
what an improvement on those upgraded lights. the drone shot really showed how good those lights work thanks for sharing the video
Between the headlights and the work lights its night and day. Im very happy with the results. Thanks for watching. Always look forward to your comments.
I was pumped to see you uploaded a new video. That kioti is pimped . Beer girl does the beer delivery better 🍻 😂. Good job Kyle looking forward to the next video .
The next video should be a good one. im looking forward to the next upgrade. Yea I can't compete with her. Thanks for watching buddy. sorry for the delay between videos. been a busy couple weeks
My pattern used to be like this then I added Ridged side lights from there midnight series and really lite up the area so much better.
its amazing the difference LED lights make. Thanks for watching
I have a TYM but enjoyed watching some mods are universal
All nice mods. Well done. I have chosen to leave the headlights in my L2501 Kubota stock as I leave loader on. With the loader on they are shining the back of the bucket more than anything else. I do have a led light bar up on the rops and that makes a huge difference.
I like the before and after shots that you did. Great job.
Thanks I appreciate it. Those led light bars are amazing. I agree with the headlights. They really dont do a whole lot of good with the loader on. Thanks for the comment.
Great, I wondered if you or anyone you know on here has ever replaced the entire headlight housing?
I wanna do these LED's but i have to replace a cracked housing and cant find anything on how the are removed.
Thanks
Do you have the new housing yet? Ill take a look at mine and see if i can figure it out. Ill let you know.
@@SpicerDesignsLLC Thanks, I'm getting it from my Dealer tomorrow so I wanted to put LED Bulbs in there as well.
Are those OXILAM LED for the Headlights any good or would you say get other ones ?
I would def look around. Theyre pretty cheap. They are brighter than stock though
Great job. Not happy to see the yellow tools but at least you have a few MILWAUKEE TOOLS in there too. Keep up the good work.
Oh come on! They both have their strong points. Milwaukee definitely has a lot more tools. Once you get enough batteries your kinda stuck with that brand. Theyre so expensive. Thanks for the comment.
It's been my (40+ years) experience that bucket leveling indicators aren't used much. Asking an owner if they wanted to fix or replace one usually got "Scrap it". .Lower the loader in float while curling the bucket in. Take it off float when it's all the way down and start rolling the bucket out. When the bucket starts to lift the loader arms you're level. Or try the modern method - mount a backup cam to the front of your tractor..
I guess its all what you get used too. I prefer to use the indicator myself but that's just me. My next video is actually installing a touchscreen and rear camera. Should be up next Friday. Thanks for the comment!
I don't if you could pull off this up-grade, but I would like to place camera just below the roof, center front and a small screen monitor in the cab for visibility to the loader forks, bucket and grapple. It sure would increase productivity.
Maybe you would have to place the camera on the elbow of the loader boom. If you could pull that off it would be great.
I have the Bobcat CT5545 (Kioti 45 HP with cab)with a cab. I think a kit like that would sell.
...by the way, you're doing a great job. Thanks
Thats kinda crazy you mentioned that. My next video is going to be replacing the stock radio with a touchscreen and a rear camera for attachments. I believe you can add a front camera too. I should have that video up in the next week or so. All the parts showed up last week.
@@SpicerDesignsLLC Go for it!!!!! I would love to see your solution!!!
Like your videos! I have CK4010se cab same frame and everything. Need to change the running lights to LED also! (right beside the front blinkers)
Thanks Brad. I did start looking at doing the Blinkers. I would like for everything to be LED. ill do that soon, not sure if ill make a video for it though.. IDK. thanks for the comment!
@@SpicerDesignsLLC I left my blinkers and brake lights Halogen
Go get me a beer.😂😂😂😂😂 love it!!!
Paint the tip of the bucket level indicator for easier at a glance visual
The "baloney slice" on the bucket level indicator tube was standard on the Ford Compacts circa 1980.
I am going to do the slice, but I am also going to remove the tube and mill small segmented windows it. (Small so you can't get your fingers in them) and paint the rod red or orange.
I thought about painting the tip as well. The metal on the rod and the sleeve are the same so it can be hard to see it sometimes.
Looks like a great idea on the diagonal cut for the bucket level indicator. So I think I'd take the talking over the shorts in case your doing a pole......🤣🤣(probably shouldn't say pole....🤣)
Much nicer to have the lights all the same color, something I need to do as well.
I can't take credit for it. John Deno in the comments suggested that. It works really well. Ya i don't stand a chance against the keystone girl.. You'll be glad to know those shorts are in the trash. Thanks for watching!
Hey Kyle I’m enjoying the tractor videos!! I’ll have a 2610 open station in few weeks from Robsons in WESTVILLE! We live on the outskirts of Michigan City near LaPorte. Hey what was name of those LEDs for the headlights again? Glad to see a NWI you tuber!! Thanks.
Ronsons”
There are links in that led video for the lights and i can make you some z brackets as well. I charge $25 for a set. I was planning on making a couple kits for Matt to stock in westville.
a machine operator i know told me to spray paint on the rod and not cut it... then you can still have the whole rod, and maybe spray different colors as it gets close to level....
Ya thats not a bad idea. Theres all kinds of ways to do it. Once i cut the rod i was kind of stuck with it. The angled cut on the sleeve definitely makes it easier. Thanks for the suggestion
I like your videos just wish you had a YT235 Yanmar
Kioti has been a great tractor. Yanmars are nice too
Where’s the video for the work lights? Wanting to do mine
@@nate5456 i unfortunately deleted that video a while back. There were some things in it that I wasnt very happy with. I do still have the z brackets that i sell to get the leds to fit right. I will make another video on it this fall.
Can you share the link on which lights to order for the work light?
It's your attractor a 26-10 if it is how do you like it I'm thinking about getting a 26-10 CK cab tractor
It is A 2610. Ive been very happy with it. Havent had any situations where ive lacked power yet.
Just found your channel I’m getting ready to pull the pin on a NS 4710 cab can’t wait like your contact
Nice! Ive had no issues with my Kioti. Congrats on your soon to be purchase.
Those are some nice cans…
Of Miller Lite and Kingstone! Is that bucket leveler adjustable?
I couldn’t agree more. I dont think theres much adjustment after the initial cut. Theres a couple ways to set up that indicator. I just got the bucket level and cut the rod flush. Adding the angled cut made it a lot better.
You really need to work on her choice in beer. Lol
For the love of all that is fu@#ing holy….. don’t ask Kyle to get you a beer ever again! My eyes 😵💫
Haha. I forgot about that video. But i remember the part your talking about. Not my best monent
You may want to put some white, yellow, or red paint on the end so you can see it quicker!!!
Can't wait this but good lord she is gorgeous
One of my tractor's has a bucket level indicator rod on it and the other tractor does not but I found out. That the more you use your machine you will get used to where the bucket is you will not even worry about a bucket level indicator that's actually a waste of money I think. Nothing feet practice and experience running gear machine
Ya i can see where your coming from. At the end of the day its a preference thing. I prefer to use it. Ive gotten used to it and it came on the tractor when i bought it. It comes in handy with most of my projects. Thanks for the comment!
Getting under the hood to access those headlights is no easy task. i am a big dude and not looking forward to swapping out mine to LED. I know it will be worth it though!!
Its not easy. I lifted the loader to change them before the video. It was definitely easier. Thanks for the comment
I bet he isn't drinking Bud Light any more.
Never was a fan of Bud Light. Guess it worked out.