Great video. Some tips for others: Buy new hardware instead of rattle canning everything, then torque to spec. Also, it is not recommended to use grease on the new rubber, they are supposed to "bite" and assist in the cushioning. If they just spin on grease, they are not doing their job. Additionally, you wouldn't want to use a petroleum based grease on rubber, which will soften and advance wear. If you did elect to use grease, a dielectric or food-grade based grease would be preferred as to not soften and compromise the rubber. Thank you for posting Brian.
You can buy all new grade 10.9 hardware from Bel Metric for very little money (like $20.00). The only hardware I reuse is the unique, proprietary stuff, which I sand blast and get replated, which is also not very expensive. Replating everything from the engine and front suspension on my 924S only cost me about $100.00.
Great Video Brian!! I'm Still Deciding on Doing the Work Myself, Replacing the Rear Torsion Bars, Bushings, and Spring Plates or Having a Shop Perform the Work on My 1975 Porsche 911. I Have a Few Questions. If I Replace the Factory Spring Plates With Adjustable Spring Plates, Is It Just as Crucial to Have the Splines Clocked the Same on the Torsion Bars, or Does the Adjustment In the Spring Plate, ie Sway Away Spring Plates Take Up the Difference? If I Were to Have a Shop Perform the Upgrade to New Torsion Bars, Bushings, and Spring Plates, How Many Hours Is Reasonable to Estimate for This Job? Thanks, Scotty
Great video Brian. This project has been on my list for a while for my 79' SC. Anything about my model year that you can think of that will be drastically different from your procedure? Without this video I wouldn't even try to tackle this myself! Thanks again!
You might have an additional two bolts on the swing arm if I can recall correctly. Mark on the body/frame the current angel of the swing arm before taking them off, helps gets the alignment back much quicker.
I did an old fashion home alignment first LOL then took it to a shop once I was finished with all the work. Maybe I should do a video on how to do an alignment at home? HUMMMMM
BRIAN!!!! Congratulations on reaching 1,000th subscribers!!!!!!!
Thank you brother!!!
One of the most useful and efficient videos on the subject ever! Thank you sir!
You're very welcome!
Great video. Some tips for others: Buy new hardware instead of rattle canning everything, then torque to spec. Also, it is not recommended to use grease on the new rubber, they are supposed to "bite" and assist in the cushioning. If they just spin on grease, they are not doing their job. Additionally, you wouldn't want to use a petroleum based grease on rubber, which will soften and advance wear. If you did elect to use grease, a dielectric or food-grade based grease would be preferred as to not soften and compromise the rubber. Thank you for posting Brian.
You can buy all new grade 10.9 hardware from Bel Metric for very little money (like $20.00). The only hardware I reuse is the unique, proprietary stuff, which I sand blast and get replated, which is also not very expensive. Replating everything from the engine and front suspension on my 924S only cost me about $100.00.
Great video, Thank you for explaining how to replace the bushings. Now that’s what I need to do for my 1974 911.
Awesome and thank you sir!
Cool. Thanks. I remember doing this before. It’s a bit of a pain. Haha
Major pain in the @$$
Great video, it’s not easy filming and working at the same time 👍
It can be a struggle that is for sure lol thanks for watching!
Great Video Brian!!
I'm Still Deciding on Doing the Work Myself, Replacing the Rear Torsion Bars, Bushings, and Spring Plates or Having a Shop Perform the Work on My 1975 Porsche 911. I Have a Few Questions. If I Replace the Factory Spring Plates With Adjustable Spring Plates, Is It Just as Crucial to Have the Splines Clocked the Same on the Torsion Bars, or Does the Adjustment In the Spring Plate, ie Sway Away Spring Plates Take Up the Difference? If I Were to Have a Shop Perform the Upgrade to New Torsion Bars, Bushings, and Spring Plates, How Many Hours Is Reasonable to Estimate for This Job? Thanks, Scotty
Not sure the total hours for a shop, but I do know that with the adjustable plates it's way easier to change the settings!
Outstanding video, well filmed and presented, sir.....good job!
Thanks for watching, I appreciate it!
You Sir, are a very good mechanic! Very well explained. Excellent content with great editing. Thank you.
Glad it was helpful! I like easy and simple ways of doing things.
Thank you!!! Looks easy and I will try my myself
Its not that hard of a job, the tough part is getting the springs in the right angel as they were.
Great video Brian. This project has been on my list for a while for my 79' SC. Anything about my model year that you can think of that will be drastically different from your procedure? Without this video I wouldn't even try to tackle this myself! Thanks again!
You might have an additional two bolts on the swing arm if I can recall correctly. Mark on the body/frame the current angel of the swing arm before taking them off, helps gets the alignment back much quicker.
This looks easy peasy. Thanks!
It wasn't a hard job at all... mostly getting the alignment back was the hardest part.
Great stuff Brian! Did you have to get your car professionally aligned after replacing the bushings?
I did an old fashion home alignment first LOL then took it to a shop once I was finished with all the work. Maybe I should do a video on how to do an alignment at home? HUMMMMM
@@ArrowheadGarage Thanks for the videos and your input to the 912 forum!
Make sure your torsion bars are set in with the splines in the correct position to set the outer splines in the same angle positions.
You saved my day! Thanx!
Heck ya!!! Glad my video helped out man! Thanks for watching!
Do you recommend any particular bushing brand? 84 Targa
Mike I went with URO brand, but I think the next time I do this, I will use Factory Porsche rubber bushings. Thanks for watching man.
@@ArrowheadGarage Thank you. Awesome videos and a great help
No petroleum based grease on the rubber bushings. They will deteriorate rapidly. Only use synthetic grease, non-petroleum based.
Voltage is the less you must check.. you need is current.. this video is nothing just loos time and damage the kitchen pots