MJX 10208 V2 Trucks - AMP & Watts Power Testing SHOCK!

Поділитися
Вставка
  • Опубліковано 5 лют 2025
  • I decided to test both my MJX 10208 V2 " Little Monster " Trucks with the AMP/WATT meter because the second one I bought is significantly slower and way less mental than the first one I bought.
    The first one is a mental wheelie machine, the second one barely wheelies and is slower. So which one is as it should be ??
    I used 2 identical of 3300Mah, 4s 40c batteries and also 2 6200 4s 80c batteries. The trucks are fitted with 120 Amp speed controllers and questions have been asked if XT60 connectors are good enough for these trucks - being rated at 60amp CONTINUOUS power.
    After identical tests ripping the trucks up the street and measuring the PEAK AMPS and PEAK WATTS, then multiplying the AMPS x WATTS to get a POWER score It proves conclusively TRUCK 2 is no way near as mental as TRUCK 1.
    Here are the numbers:
    3300 40c battery:
    TRUCK 1 = 77 Peak Amps and 1062 Peak Watts = Power Score of 820
    TRUCK 2= 59 Peak Amps and 831 Peak Watts = Power Score of 496
    TRUCK 1 = Draws 25% More Amps Than Truck 2 & 24% more Watts.
    6200 80c Battery:
    TRUCK 1 = 81.96 Peak Amps and 1120 Peak Watts = Power Score of 918
    TRUCK 2 = 58.9 Peak Amps and 768 Peak Watts = Power Score of 452
    TRUCK 1 Draws 32% more Amps than Truck 2 & 37% More Watts.
    Conclusion - Scientifically Proven that my thoughts of TRUCK 2 isn't as mental as TRUCK 1 - XT60 connectors are plenty powerful enough and a 120Amp ESC is certainly overkill for this truck, but looks good printed on the adverts.
    Apologies for the slight out of sync sound at the end.

КОМЕНТАРІ • 9

  • @CoreyFPV
    @CoreyFPV 7 днів тому +1

    Very in-depth as usual🙃

  • @JunNakatsugawa
    @JunNakatsugawa 7 днів тому +1

    Nice video, I think there could be an ESC quality control issue. My ESC just slowly couldn't get all the voltage into it when I check the app on my phone and was gradually reducing performance as days go until it just won't go on now. Getting the ESC changed at the moment

  • @adamski100988
    @adamski100988 2 дні тому +1

    You are going to need to swap esc and motor over to figure out the discrepancy. Also bear in mind off road tyres will cause a larger amp draw, would of been more accurate to have had the same wheel's too

    • @captainfpv6775
      @captainfpv6775  16 годин тому +1

      I'll be redoing the test tomorrow and will be putting off road wheels on Truck 2 and road tyres on truck 1 - that way a full comparison will be apparent.
      Thanks

  • @philiprccars4340
    @philiprccars4340 6 днів тому +1

    Did you download the app for the ESC on your phone and.connected to the ESC to see if all the settings for the ESC's are the same?

    • @captainfpv6775
      @captainfpv6775  6 днів тому

      I did, thanks. It's something I actually forgot to check until a Facebook group member reminded me. Both Trucks are giving 100% on the app when the trigger is pulled to the max and my DumboRC 350 - that is connected to truck 2 says 100% on the screen. ( it also has a setting for 50 and 70% but all working correctly ). The truck was like this out the box even with the original TX.

    • @philiprccars4340
      @philiprccars4340 5 днів тому +1

      Wow, that is very interesting!!! So now all it can be is either bad electronics in the ESC or a faulty motor.

    • @captainfpv6775
      @captainfpv6775  4 дні тому

      @@philiprccars4340 I reckon so too. I have contacted the seller to ask their opinion and see if they are able to do any tests on another one .