Well done. I was asked by a customer to do a kitchen remodel and could not figure out a way to accomplish this and had to turn the job down. Very useful information for the future! Thanks Eric
Hi from Türkiye. Thanks for the video. The fact that you managed to achieve such impressive results without the need for specialized tools or complex 3D tool paths is truly impressive. I'm curious if your CNC milling machines in the D and M series are compatible with Alphacam. Do you have a Post Processor developed for this? Is there any other channel, similar to the "toolstoday" , creating Turkish for Stepcraft, aside from Stepcraft Turkey? Best regards..
I am not familiar with Alphacam. Email support@stepcraft.us and we can look into it for you. I am not aware of any other channels like Tools Today... I am sorry
I watched a video last year, and was able to do basically what you just did, but I used two V bits--90 and 120--and a 1/4" endmill, plus a 1/8" compression for the profile cut. I also made fake vertical lines between the stiles and rails, so the whole door looked like a true 5-piece door. ua-cam.com/video/P0Dv_ixWnoI/v-deo.html
I never saw this video before. Very good info. I released a new video today that uses the molding tool path in V Carve Pro and I also added info about how to make the fake vertical lines. Thank you for sharing.
Well done. I was asked by a customer to do a kitchen remodel and could not figure out a way to accomplish this and had to turn the job down. Very useful information for the future! Thanks Eric
Glad I could help. I am working on another video now regarding Doors but without V Bits and allow for more customization
Great video! Just did an inset flat panel and came out perfect!
can't wait for my M1000...1st I have to finish my workshop in the basement...👍👍
We are excited to have you as part of the family! Let us know how we can help in any way!
Outstanding! Thank you Eric
Glad you liked it!
Hi from Türkiye. Thanks for the video. The fact that you managed to achieve such impressive results without the need for specialized tools or complex 3D tool paths is truly impressive. I'm curious if your CNC milling machines in the D and M series are compatible with Alphacam. Do you have a Post Processor developed for this? Is there any other channel, similar to the "toolstoday" , creating Turkish for Stepcraft, aside from Stepcraft Turkey? Best regards..
I am not familiar with Alphacam. Email support@stepcraft.us and we can look into it for you. I am not aware of any other channels like Tools Today... I am sorry
why you dont use profile inside by vbit tool- with corners (sharp internal corners)
nice video, but very hard to hear your voice. maybe turn up volumn
there is a much easier way to do this, no need to use profiles. Everything is done in Modeling
could not turn my volume up high enough to hear the video.
I watched a video last year, and was able to do basically what you just did, but I used two V bits--90 and 120--and a 1/4" endmill, plus a 1/8" compression for the profile cut. I also made fake vertical lines between the stiles and rails, so the whole door looked like a true 5-piece door.
ua-cam.com/video/P0Dv_ixWnoI/v-deo.html
I never saw this video before. Very good info. I released a new video today that uses the molding tool path in V Carve Pro and I also added info about how to make the fake vertical lines. Thank you for sharing.