Mitsubishi Colt Z30 (2002-2012) Board Computer Screen Repair

Поділитися
Вставка
  • Опубліковано 5 гру 2022
  • Mitsubishi Colt Z30 (2002-2012) Board Computer Screen Repair. As this is often failure point on this great little car, I will show you how to repair this irritating issue. In my case, screen was simply dead (no backlight and no LCD working). After fix, all good as new!
    🔧 Enjoying this repair tutorial? Consider supporting our channel by buying us a coffee! ☕️
    👉 Click here to donate: www.buymeacoffee.com/regularg...
    This video was NOT sponsored in any way.
    Music: www.bensound.com
  • Авто та транспорт

КОМЕНТАРІ • 44

  • @regularguyrepairguy
    @regularguyrepairguy  3 місяці тому

    🔧 Did this repair tutorial help you fix your stuff? If so, consider showing your support for our channel! 💪 Check out the video description for additional resources and ways to contribute. Your generosity helps us continue creating helpful DIY repair guides. Thanks for being part of our community! 🛠💙

  • @Kimdino1
    @Kimdino1 11 місяців тому +2

    Many thanks, mate. Mine was bugging me for years. I don't think it's broken but just has a loose power connection. It's sometimes all working properly, while at other times it's completely blank.
    I looked at stripping the dash (too much grief), and took the stereo out (still couldn't get at it). I then came to the conclusion that Mitsubishi must have fitted it before they fitted the windscreen. As I wasn't going to remove the windscreen for it I gave up on sorting it out about 2yrs ago.
    So the star bit of your video, for me, was the location of those hidden plastic clips. Access looks SO easy now I know about them. Thanks again.

  • @andreasachilleos6335
    @andreasachilleos6335 2 місяці тому +1

    Just done the same to mine and it now works thanks pal your the best 🎉👍👍

  • @RafaelLourenco2004
    @RafaelLourenco2004 Рік тому +2

    Thank you so much! I have a Mitsubishi Colt, but mine isn't broken yet but I am glad I found your video since I heard other people say that they experienced problems with Computer Board, now in case it breaks, I know what to do. 👍😀

  • @georgecojocaru9015
    @georgecojocaru9015 Місяць тому +1

    Interesant! O adresa de email, am schimbat 2 pana in prezent. Multumesc

  • @IANROBY
    @IANROBY 6 місяців тому

    thanks for this video ive fixed mine to your instructions thanks very grateful

  • @JuanCar89
    @JuanCar89 Рік тому +1

    Wuo, very very useful!!!!👏🏻👏🏻👏🏻

  • @fabriziofuria683
    @fabriziofuria683 Рік тому +3

    Great video. What if I replace factory radio unit? Is board computer wired both to radio and to some ither harness to get data such as fuel consumption etc.? I just want to understand if I can retain some basic board functionality after factory radio is replaced. Thanks

    • @regularguyrepairguy
      @regularguyrepairguy  Рік тому +2

      Hi! I think that consumption, temperature etc. will not be affected with aftermarket head unit. Where station is shown(or CD track) it will be just empty space. Thanks for the comment!

    • @hendriediepenbroek5344
      @hendriediepenbroek5344 3 місяці тому

      Yess but you cannot.change later consumption average or at this.momemt

  • @albertberal2882
    @albertberal2882 22 дні тому +1

    Hi! Thanks for the tips. A few days ago my antenna (outside the car on the roof) touched a low parking ceiling, and the screen instantly got down... Do you think it's possible ? Is there any link between the antenna and the screen ?? A big thank you if you can answer this :)

    • @regularguyrepairguy
      @regularguyrepairguy  22 дні тому

      I think it is just a coincidence, the antenna has nothing to do with the screen in my opinion as it is just for FM radio signal. Thanks for your comment!

    • @albertberal2882
      @albertberal2882 22 дні тому +1

      @@regularguyrepairguy Ok. It's a big coincidence! Thank you for your answer :)

    • @regularguyrepairguy
      @regularguyrepairguy  22 дні тому

      Also the screen and head unit are separated modules (antenna is plugged in the head unit).
      You are welcome!

  • @tonymontana4408
    @tonymontana4408 Рік тому +2

    thanks

  • @BrianCarter-sn1ul
    @BrianCarter-sn1ul 2 місяці тому +1

    Do you know how to replace the lights in that unit

    • @regularguyrepairguy
      @regularguyrepairguy  2 місяці тому

      At 4:01 you see two black caps? Those are lightbulb holders. If I remember correctly, you should rotate them anticlockwise and gently pull out..

  • @lefasart
    @lefasart 3 місяці тому +1

    Με τί τό καθάρισες φίλε μου

  • @stepanfedorovich4100
    @stepanfedorovich4100 4 місяці тому

    Try to translate pls
    Как сохранить возможность переключения режимов расхода топлива и тд на бк, выкинув родной магнитофон, ибо он плохо звучит
    на рестайлинге 7 кольта можно сделать отдельную кнопку, но можно ли сделать такое же на 6 кольте

    • @regularguyrepairguy
      @regularguyrepairguy  4 місяці тому

      Not sure what you mean by that. Can you post a comment in english?

  • @romanrumcajs7982
    @romanrumcajs7982 Рік тому +2

    🇵🇱❤🇵🇱Good men!🇵🇱❤🇵🇱

  • @hendriediepenbroek5344
    @hendriediepenbroek5344 7 місяців тому

    2004-2008

  • @xl3itches
    @xl3itches 9 місяців тому

    my board computer dont turn off if i turn off the colt :(, i guess it will suck out the battery

    • @KyranNoallMedia
      @KyranNoallMedia 9 місяців тому

      I had to remove mine to stop it’s power consumption. It would stay on, bright green light, with nothing on the screen. I had unplug as was draining the battery overnight 👍

    • @xl3itches
      @xl3itches 9 місяців тому

      @@KyranNoallMedia i fixed mine, by cleaning it with a brush and isopropyl alkohol, after this i Soldered the Processor like shown in the videos

    • @KyranNoallMedia
      @KyranNoallMedia 9 місяців тому

      @@xl3itches I’ve just got the circuit board out. I’ll do this today for definite then, cheers lad 👍

    • @xl3itches
      @xl3itches 9 місяців тому

      @@KyranNoallMedia just care while soldering and remove as much as you can of this yellow sticky glue, also use a thin tip for the soldering iron.
      and i recommend using solder paste it will ease the soldering. if youre ready look very very closely to the solderings and check twice before going back to your car and build in the BC, will safe some time

    • @regularguyrepairguy
      @regularguyrepairguy  8 місяців тому +1

      Glad that you solved your problem 👍

  • @tomdelonge182
    @tomdelonge182 7 місяців тому +1

    как сдклать отдельную дсп кнопку для переклбчения показателей?

    • @regularguyrepairguy
      @regularguyrepairguy  6 місяців тому

      Sorry, I do not understand what you mean

    • @stepanfedorovich4100
      @stepanfedorovich4100 4 місяці тому

      @@regularguyrepairguy how to make a another button to change fuel marks l/100 and more
      because onboard computer can change this parameters only with stock mp3 musicbox

    • @regularguyrepairguy
      @regularguyrepairguy  4 місяці тому

      No idea about that, the one from the video still has the original stereo.