Simple Rim / einfache Felge - Catia v5 Training

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 52

  • @andrewmo49
    @andrewmo49 Рік тому

    Very nice. Seeing the mistake on the surface was very informative

  • @wolfgang.walden.cad.training
    @wolfgang.walden.cad.training  10 років тому +2

    Hi, thx :) - if you want to organize your tree - use geometrical sets and multibody models. I have many videos in my channel in regard to these topics.

    • @CK_edits
      @CK_edits 8 років тому

      sir I want to learn BIW design in Catia V5, can u post some videos on it?

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  8 років тому

      Hi.I will consider it :')

    • @farhadniky2832
      @farhadniky2832 7 років тому

      Wolfgang Walden it's awesome and very difficult. But I made it finally. Thank you.

  • @CARLOS_FM85
    @CARLOS_FM85 4 роки тому

    Great video. I always thought a rim might be somethig a complicated job using surfaces, but you made it really easy

  • @christhjian9923
    @christhjian9923 7 років тому

    Great tutorials. I hadn't touched CATIA for a while and it's so good to catch up and learn new features. I've done the manifold, impeller, this rim and startd with crankshaft so far and gonna do more :)

  • @vasosmp
    @vasosmp 8 років тому

    Hi! I like the way you organize your work.

  • @djogi86
    @djogi86 8 років тому

    Hi! I Can"t found that "Remove" tool on 14:50min. Where I can found that tool ? Thanks.

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  8 років тому +1

      Hi - go to this toolbar is called "boolean operations" ->view->toolbars->boolean operations - or ->insert->boolean operations->remove :)

    • @djogi86
      @djogi86 8 років тому

      Great :) Thanks a lot!

  • @kinga3984
    @kinga3984 2 роки тому

    great work, but i d like to see where do you find dimensions

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  2 роки тому +1

      Thanks, this is not a real existing rim, the dimensions are completely made up. This is just an exercise.

    • @kinga3984
      @kinga3984 2 роки тому

      @@wolfgang.walden.cad.training okay tank you

  • @MarcusAuyrelius
    @MarcusAuyrelius 9 років тому +2

    Good video, good pace and thanks for the commentary. It helps to make following easier. Thank you.

  • @saifed-dinfertahi7948
    @saifed-dinfertahi7948 10 років тому

    merci beaucoup monsieur pour cette vidéo, en attendant que vs publiez the more complex one

  • @pratheeksthulasiram
    @pratheeksthulasiram 4 роки тому

    Hello sir,
    Can you please do a tutorial of designing a basic bike helmet using catia surfacing?...it would be really helpful!

  • @ludwigbernd2904
    @ludwigbernd2904 9 років тому

    danke für das tolle tutorial. anscheinend beginnen SIe in der gsd Umgebung, jedoch wechseln Sie später in die Part Umgebung. sehe ich das richtig? wenn ja, warum gehen sie so vor?
    besten dank für Ihre Bemühungen !

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  9 років тому

      Ludwig Sers Hallo, also normalerweise wechsle ich in die Partumgebung wenn ich mit dem Flächenmodell fertig bin und ein Volumen/Part daraus machen möchte.

  • @aldor.marquezbreton1122
    @aldor.marquezbreton1122 9 років тому

    Hi Mr. Walden thank you for the help, excuse me i have a problem: When i try to insert the geometrical set, pops a message that says:“Sketch 1” can’t be selected because it’s inconsistent with aggregation rules" can you tell me why this happens please?

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  9 років тому

      Aldo R. Marquéz Bretón Hi, hard to say - but I suppose you made some references between some of your sketches, which you should avoid to make. I would have to have you model to review it.

    • @ludwigbernd2904
      @ludwigbernd2904 9 років тому

      Aldo R. Marquéz Bretón
      i have the same problem :( have u already solved the problem?

    • @wolfgang.walden.cad.training
      @wolfgang.walden.cad.training  9 років тому

      Ludwig Sers Aggregation Rules, are usually the rules which involve the structure of the construction tree. So I would need your models to see what went wrong. Maybe you have enabled Hybrid Modelling?

  • @ishtiaquemahbub4824
    @ishtiaquemahbub4824 9 років тому +1

    Vielen Dank Herr Walden. Ich habe von diesem Video viel gelernt. :)

  • @amradel6736
    @amradel6736 6 років тому

    good video , please helps me to make modeling in this program

  • @lyy1990012
    @lyy1990012 9 років тому

    hi!i want to know how do you set the "Axis Systems" in CATIA?thanks

  • @saiyadav7101
    @saiyadav7101 11 місяців тому

    Sir I had an doubt

  • @eduardosilveira6145
    @eduardosilveira6145 7 років тому

    This is the mode of part design?

  • @MrImthe1
    @MrImthe1 4 роки тому

    WELL SUCH A WAY TO FINISH A JOB. THUMBS UP :))))

  • @jhonnatanc.e.3043
    @jhonnatanc.e.3043 10 років тому

    HI.. GOOD JOB.¡ I WOULD LIKE LEARN TO ORGANIZED MY OPERATION IN THE TREE?
    SO MAYBE YOU COULD BE HELP ME.. THANKS..

  • @siva2913
    @siva2913 5 років тому

    Attractive sketch sir

  • @Rodrigo_Microelectronics
    @Rodrigo_Microelectronics 9 років тому

    hello Mr Walden thank so much your videos! It has helped me a lot in my professional growth! your videos are very good, Sr performs a great job! I've become a great professional all because of Mr Walden videos! Thank you very very much!
    Carlos Rodrigo da Silva
    Measurement and Processes Technical / Production And Process Control

  • @lyy1990012
    @lyy1990012 9 років тому

    I am a chinese user of CATIA,but i am a green hander.but my English is so poor,so i cannt understand what you say! it is a pity!

  • @farhadniky2832
    @farhadniky2832 7 років тому +1

    Hi Wolfgang Walden, This is not a simple Rim !!