GEEETECH A20 3D Printer Unbox Setup and Print!
Вставка
- Опубліковано 15 бер 2020
- When you get the printer for the first time, you will always feel confused, don't worry! GEEETECH comes for you!
In this video, we'll show you how to unbox build and print with GEEETECH 3d printer A20! Let’s find out!
Geeetech A20 3D printer is designed to be reliable, cost-effective and easy-to-assemble. Running stably, it delivers quality prints and provides you with satisfactory printing experience.
✔️With its build volume as 250*250*250mm³, A20 makes the best of the building platform and gives you a full view of the printing details.
✔️Its well-designed extruder greatly reduces the risk of clogging or leaking.
✔️Featuring printing accuracy of 0.1 mm, it delivers exquisite prints with delicate texture, sleek contour and stable structure.
✔️It comes with OPEN SOURCE GT2560 control board, providing limitless space for you to modify the firmware and tinker with your printer.
✔️The break-resuming capability and filament detector are two practical features to escort your printing journey.
A20 Purchase link:
Official website: bit.ly/2WfsWZz
US: amzn.to/2HX1Qhu
DE: amzn.to/2HWhhGO
FR: amzn.to/39FxzzC
UK: amzn.to/2wwk2fk
IT: amzn.to/32PesRo
ES: amzn.to/3aZFLvj
GEEETECH Official Site: geeetech.com/
Facebook: / geeetech
Instagram: / geeetech
Twitter: / geeetech
Thumb if you like it sub if you love it, hope you all enjoy this video :) - Наука та технологія
I cant get my 1st layer to stick well I have tried glue stick still same issue.
Check the following points:
1. The hot bed is not level and needs to be leveled
2. Hot bed deformation (An easy way to judge whether your bed is warped is to use a steel ruler or ruler, put it on the bed, and observe the gap between the edge and the bed.)
3. The nozzle is or is too close to the hot bed
4. The hot bed temperature setting is too low
5. It may be that the contact area of the object is small, and brim can be added to the printer
6. Do not turn on the fan on the first layer of printing.
Geeetech A20 have the filament sensor?
Yes there is
Just a suggestion. Your video should follow your "attempt" at assembly instructions. Your Quick Start Guide does not match the contents. Unfortunately, this is all too common for chinese tech. I will find another video for the details left out of the Quick Start Guide and this video.
thank you for your suggestion, for our new printers,we will make installation video more clear and detail.