Finally another 650. I sent my 2021 Z650 ECU to Chris at Moore Mafia last year and I love the tune. I did feel her more sluggish than before the tune. But that may have been due to the fact that I’m from Puerto Rico and the elevation, temperature and fuels are different. Chris if you get to read this I love my bike and you do amazing work. If you could comment on that it would be great but not necessary. Love from Puerto Rico! Come hit the drag strip some time here in the island
@JMang101 Gonna be honest The Bike sounds great and runs great Do I feel like it's a whole new bike like some people say not really That said it's running the way it should the temp is lower and the acceleration is a bit quicker
Shorty pipes suck for the Ninja 650. There are reasons why Arata made a system that maintains back pressure. Leo Vince had a slip on too that had a windy mid pipe created for this exact reason.
Hey Chris as much as I would love to agree with you the problem with all the other pipes you recommended are in the $800 to $1k+ price range, maybe you try get hold of Hindle EVO Megaphone Full Exhaust System I'm curious how well it does over the Delkevic exhaust.
Please try and get some kspp throttle bodies for these, the stock are just soft rubber and squeeze at high rpm, thus crap top end. I have your flash, with a filter and the throttle bodies, I haven't been to the track yet to really test, but feels better on street anyway.
@@T3-RIDER at 50 horsepower stock, I would consider that a beginner bike. 👍🏻 I had a CBR 600 back in the 90’s that had more power than that and that was my first street bike
@@elonmust7470 just bc it has less than the 1l bikes or other supersports doesnt make this bike slow dude. its by now means a slow bike. I mean it does 0-100km/h in 3.5s
everything is fine but i think now it's time for Kawasaki to make this Ninja 650 a little bit more aggressive and track friendly.... just a lill bit....
@@elonmust7470 nah kawasaki needs to turn the 650 into an r7 and gsx8r killer. Everybody's going to middle weight p twins and kawasakis had the same exact engine in the 650 since they first came out with little to no updates. It's time to update the nearly 20 year old engine
Mr Moore mafia my name is Dylan all the way from South Africa... Bro u are amazing at what you do... Never had the finances to own a bike of my own but please help me... Been subscribed to you from a very long time please send some love to south africa
Delkevic exhaust about killed me with the shitty carbon gasket and weak ass clamp. It fell off doing 80 on the highway and sent me into a tank slapper.
Been wanting to get my ECU flashed by you but wanted to get a full exhaust system first. What full exhaust would you recommend for a 2016 ninja 650? Ive been between the Yoshi and or the akrapovic. Any insights would be appreciated
Hi mate been watching your vids for a while now and wondering if you could help me out? Im in Scotland have just built me another 5VY R1 track bike and on the back wheel im feeling like its resisting a bit when i spin it freehand. Ive recheched all my torque tubes etc with micrometers and it all checks out, its on new bearings and they got rechecked too and all minted. I've only gave the floating tube and all the rest of the assembly a light glove smeared coating of my bearing grease and the bearings themselves got just enough as i wanted to keep the greasing light as its obviously going to be getting taken off a lot and inspected a lot now. I just feel like its not as free moving as it used to be and thats without the chain on it and brake caliper on it so no drivetrain loss at all. Its not "hard to move" per say but if i give it a good hard push i get just over 1 rotation of the wheel and with all the chain and brakes fitted id be lucky to get one full rotation unless i really push the tyre hard. Would you say this is a problem or am i just paranoid and because quite a lot of the assembly and the grease is all new that its likely to be tight. Can post a vid of it.
Delkavic are rubbish exhausts. A good but affordable exhausts for these things has to be leovince. They also have a resonator which makes it sound less raspy. Got one on my Z650 and while these engine don't sound the best, leovince pipes do make them sound fairly nice.
Does anyone know if you can fit these ninja exhausts on a vulcan? The aftermarket support for the ninjas are just better and I'm not sure why cause they run the same motor
Bought one of these 650's as a first street bike after only riding in dirt. Really lacking the power for most american roads... Switched to a Z900 in only 4 months....
Go ride your literbikes only in straight lines. Focusing only on shift lights or rpms. We'll be causing the twisties. Actually riding the machine. Not playing drag race simulator cuz all your go for is using gas and shifting. So hard. So fast. You're so kewl
@moore mafia I want to bring my 24 ninja 650 to you I’ll be coming from Long Island ny gonna have akropovic full titanium race exhaust velocity stacks dna air filter pair valve block and o2 delete
That first pull sounded like absolute crap. I have a 2008 ninja 650 with a Delkevic I promise I can out run that thing. I love the way it sounds ,and just sayin mine has right at 78hp. I don't think that's a exhaust thing as much as it is a Kawi thing with all the new poop they do to the bikes.
@@exothermal.sprocket The MT07 is trash in curves. Everybody that gets one has to upgrade the suspension on them because they bounce so much in curves. I also speak from experience in owning both. The only thing the MT07 is good for is wheelies.
Man I love this channel I was just about to look up a ninja 650 on dyno and here you go!!!
Finally another 650. I sent my 2021 Z650 ECU to Chris at Moore Mafia last year and I love the tune. I did feel her more sluggish than before the tune. But that may have been due to the fact that I’m from Puerto Rico and the elevation, temperature and fuels are different.
Chris if you get to read this I love my bike and you do amazing work. If you could comment on that it would be great but not necessary.
Love from Puerto Rico! Come hit the drag strip some time here in the island
He can adjust for those variables and usually does, but you need to bring it up in your tune notes.
Sounds ok. Weld it up. When ready to change saw it off. That torque number is very respectable
Zx6r exists for that reason. 😂
@@DaBuGzLiFe The ZX6 is a PIA to ride after about an hr. Lots of people don't like to ride in the MotoGP position. As is every other supersport.
I have this bike with a Mivv full exhaust and of course that Moore Mafia ECU work!
Just shipped my 22 650 ECU in yesterday can't wait to get it back and see what we got
Hey mind sharing an update?
@JMang101 Gonna be honest
The Bike sounds great and runs great
Do I feel like it's a whole new bike like some people say not really
That said it's running the way it should the temp is lower and the acceleration is a bit quicker
Shorty pipes suck for the Ninja 650. There are reasons why Arata made a system that maintains back pressure. Leo Vince had a slip on too that had a windy mid pipe created for this exact reason.
Hey Chris as much as I would love to agree with you the problem with all the other pipes you recommended are in the $800 to $1k+ price range, maybe you try get hold of Hindle EVO Megaphone Full Exhaust System I'm curious how well it does over the Delkevic exhaust.
Moore Mafia, y'all rock! ❤Peace
Please try and get some kspp throttle bodies for these, the stock are just soft rubber and squeeze at high rpm, thus crap top end. I have your flash, with a filter and the throttle bodies, I haven't been to the track yet to really test, but feels better on street anyway.
Did you ever get it on a dyno?
Do you guys do ECU flashing just to get a stock set up to run better? I have a 650 and alot of on and off throttle jerking
That almost sounds as good as my childhood 1970's Schwinn did with the card's in the spokes. 😂
😂
I have a delkevic on my gsxr 750 also had one on my cbr1000 have vids of both on my channel gsxr exhaust clip under”yamawho”
Sending my 22 650 ecu in with the same exhaust. Boy runs lean as hell right now lol
You will getting my ECU in the future 🤘🏽
Cool beginner bike, looks good and just enough power to have fun, especially now with the MooreMafia touch👍🏻
A 650 isn't a beginner bike 😂
@@T3-RIDER at 50 horsepower stock, I would consider that a beginner bike. 👍🏻 I had a CBR 600 back in the 90’s that had more power than that and that was my first street bike
@@T3-RIDERIt's definitely a beginner bike..
It's a complete toy compared to the supersports that Kawasaki makes...
@@elonmust7470 just bc it has less than the 1l bikes or other supersports doesnt make this bike slow dude. its by now means a slow bike. I mean it does 0-100km/h in 3.5s
right because only beginners should drive anything under 1000cc 🙄
I have a 2023 650 with this exhaust, had to buy clamps off of amazon to actually make it seal and stay on. Huge oversight by delkevic IMO
What clamps did you buy having the same problem
everything is fine but i think now it's time for Kawasaki to make this Ninja 650 a little bit more aggressive and track friendly.... just a lill bit....
Nobody wants that, they want a lot more than a little bit. AKA 6r......
Ride by wire?
@@elonmust7470 nah kawasaki needs to turn the 650 into an r7 and gsx8r killer. Everybody's going to middle weight p twins and kawasakis had the same exact engine in the 650 since they first came out with little to no updates. It's time to update the nearly 20 year old engine
I have a golf tee jammed in my pair valve tube. 😂
Mr Moore mafia my name is Dylan all the way from South Africa... Bro u are amazing at what you do... Never had the finances to own a bike of my own but please help me... Been subscribed to you from a very long time please send some love to south africa
Would you recommend doing the flash without buying an exhaust system? I have a 2023 650 as well.
Absolutely! It's detuned from the factory for EPA emissions regulations...
Great vid, I have a ninja 650.
Side Note, what are those ceiling lights?!
I have this bike with the akrapovic. Im debating sending in the ecu
Do it! 🏍️💨
Delkevic exhaust about killed me with the shitty carbon gasket and weak ass clamp. It fell off doing 80 on the highway and sent me into a tank slapper.
Have same bike . I have a hindle megaphone. Want a Ecu flash.
Change your camera position . Can't see the new display during runs .
I'll try to switch it around and see what you guys like best.
Been wanting to get my ECU flashed by you but wanted to get a full exhaust system first. What full exhaust would you recommend for a 2016 ninja 650? Ive been between the Yoshi and or the akrapovic. Any insights would be appreciated
Sounds like my old 4 wheeler
Does a flash void the warranty?
Just got a Yoshi Stainless AT2 full system and K&N filter for my '18 GSXR 1000. Do you have a good tune?
Great job. Just a smidge
did the customer install a quickshifter? or are you doing powershifting?
Have 2023 ninja 650 with hindle megaphone full system.
My wife owns same bike. Very interesting
I got my 2023 ninja 650 flashed a while back, should I go back in and cover the pair valve?
What is the Best Exhaust for 2016 Versys 650 lt. Who still does carbureted Bandit 1200's?
If i buy a tune will that get me entrys into the giveaway
Would you be willing to work on a 2024 Honda fury.
Hi mate been watching your vids for a while now and wondering if you could help me out? Im in Scotland have just built me another 5VY R1 track bike and on the back wheel im feeling like its resisting a bit when i spin it freehand. Ive recheched all my torque tubes etc with micrometers and it all checks out, its on new bearings and they got rechecked too and all minted. I've only gave the floating tube and all the rest of the assembly a light glove smeared coating of my bearing grease and the bearings themselves got just enough as i wanted to keep the greasing light as its obviously going to be getting taken off a lot and inspected a lot now. I just feel like its not as free moving as it used to be and thats without the chain on it and brake caliper on it so no drivetrain loss at all. Its not "hard to move" per say but if i give it a good hard push i get just over 1 rotation of the wheel and with all the chain and brakes fitted id be lucky to get one full rotation unless i really push the tyre hard. Would you say this is a problem or am i just paranoid and because quite a lot of the assembly and the grease is all new that its likely to be tight. Can post a vid of it.
I would go with deferent bearings can get bad brand new stuff if you can afford it get the ceramic bearings
Delkavic are rubbish exhausts. A good but affordable exhausts for these things has to be leovince. They also have a resonator which makes it sound less raspy. Got one on my Z650 and while these engine don't sound the best, leovince pipes do make them sound fairly nice.
Delkavic makes exhaust for a lot of older bikes that you can't get from anyone else. They're a good company for that reason alone
That's your opinion which means jack squat to me
Chris, what happened to zx6 you were trying to blow up? Should see how much nitrous it will hold. 😂
It's still sitting in the corner.
Does anyone know if you can fit these ninja exhausts on a vulcan? The aftermarket support for the ninjas are just better and I'm not sure why cause they run the same motor
Can the 2nd throttle plate be tuned?
Damn the 2024 Kawasaki ninja 650 has like 67 hp
Not to the wheels. Listed ho numbers from factory specs are rated for crank horsepower. Not the same at the wheels on a stock bike
I was gonna have moore mafia tune a 2017 650 but glad I didn't thought I would of got more power but not much more n the engine break hits to hard
It's a very noticeable difference on that bike.
@@TeamMooreMafia I got a question about tuning a 98 Honda shadow cruiser
Bought one of these 650's as a first street bike after only riding in dirt. Really lacking the power for most american roads... Switched to a Z900 in only 4 months....
Ridiculous. Unless you weigh 250lbs+ or more.
@@spartanx169xGo ride a 195whp liter bike & get back to us.......
Go ride your literbikes only in straight lines. Focusing only on shift lights or rpms. We'll be causing the twisties. Actually riding the machine. Not playing drag race simulator cuz all your go for is using gas and shifting. So hard. So fast. You're so kewl
Will flashing the ECU void the factory warranty? I just bought a 2024 650 hence the question.
More likely
@moore mafia I want to bring my 24 ninja 650 to you I’ll be coming from Long Island ny gonna have akropovic full titanium race exhaust velocity stacks dna air filter pair valve block and o2 delete
who makes your velocity stack?
Jesus Christ juuuust buy a damned supersport.
Would a bone stock z650 ecu be worth getting the ecu reflashed ?
It smooths it out a ton no matter what mods you have.
@@TeamMooreMafia appreciate it!
I got a 09 flashed
What’s your top speed
I have a delkevic exhaust 😆
I have 18" slip-ons for my Yamaha FJR1300... I haven't had any issues and it sounds great without the baffles (Aka decibel killers)
Lol, for a couple of buck more. $1000+ is not a couple of bucks more.
That first pull sounded like absolute crap. I have a 2008 ninja 650 with a Delkevic I promise I can out run that thing. I love the way it sounds ,and just sayin mine has right at 78hp. I don't think that's a exhaust thing as much as it is a Kawi thing with all the new poop they do to the bikes.
The older ones actually have more HP from the factory than the new ones.
The new era of 2cyl 600s is sad. Sounds like my lawnmower and makes about the same power.
Big difference between 600s and 650s😂
isn't it supposed to make 67 hp ? why was it making 58?
I heard 68 crank and 62 wheel hp
My 86 250r made that much hp
CM$🤙🏾🙏🏾✌🏾
Throttle is very jumpy
They sound horrible.
Yeah Djokovic is definitely shity I bought one on my old Gixxer and when I put it on it ran worse I went back to my Yoshi
Djokovic the tennis guy?? 😂
@KentRoads here we go with the spelling shit .. hope off my dick ...
@@KentRoads 😂😂
@@KentRoads spelling police 🚨
Moped.
Its more than fast enough to get you killed.
I literally have a lawnmower with more horsepower and alot more torque than that junkie girls bike
Not a fast bike. Looks fast but 65hp?? 😅
MT-07 with exhaust and Hordpower airbox makes nearly 78 horsepower. Also sounds much nicer.
Plenty fast. Also very reliable.
@@exothermal.sprocket The MT07 is trash in curves. Everybody that gets one has to upgrade the suspension on them because they bounce so much in curves. I also speak from experience in owning both. The only thing the MT07 is good for is wheelies.
@@spartanx169x Wasn't talking at all about the chassis or brakes or suspension. I was making a comparison between engines in the 650-690 class.
@@vvevvevvvvIt's not fast.... It doesn't even have adjustable suspension....
Can't go fast without setup suspension...
I have 2023 ninja 650 full K.O exhaust system and power commander can I still send in my ecu
First 😂