Mechanical Problems Compilation [Part 11] 10 Minutes Mechanical Fails and more
Вставка
- Опубліковано 20 вер 2024
- Mechanical Problems Compilation [Part 11] 10 Minutes Mechanical Fails and more • Mechanical Problems Co...
Submit your Mechanical Fails, Customer States, Dashcam videos, or other automotive-related content here 👉 carhax-video-s...
❗(Our editor will make a selection and not all the videos are posted on CARHAX UA-cam Channel)❗
👉 Music for your videos. 👉 bit.ly/2OrXhPH
👉 Check any car's mileage and accident history here 👉 bit.ly/3b6S8pI
Please leave a like and subscribe to watch our following videos. Also, let us know what you think in the comments!
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal toolset (I have bought this one for almost 3 years and I still use it)
s.click.aliexpr...
-22 pieces of a removal tool set
s.click.aliexp...
-7 pieces of cheap removal tool set
s.click.aliexpr...
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpr...
-Long Torx Screwdriver T15 T20 T25 T27 T30(use Torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpr...
Small Electric Drill Cordless Screwdriver:
s.click.aliexpr...
Hooks:
s.click.aliexpr...
Flexible Magnetic Pick-Up Tool:
s.click.aliexpr...
Rubber Eraser disk:
s.click.aliexp... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpr...
Infrared Thermometer:
s.click.aliexp...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
#MechanicalProblems #Copilation #Fails
![Mechanical Problems Compilation [PART 12] 10 Minutes Mechanical Fails and more](http://i.ytimg.com/vi/Jd0mRn-8rgo/mqdefault.jpg)
![Mechanical Problems Compilation [PART 12] 10 Minutes Mechanical Fails and more](/img/tr.png)
💸 Exciting News! Earn $30 for Your Videos! 💰💰
We've got awesome news - You can now earn $30 for each video that makes it into our compilation videos! 💸🎉
Submit your Customer States, Mechanical Fails... clips/photos at carhax-video-submission.com/upload-video
I've been a mechanic for 29 years.. this is the "tame" side of what I've dealed with. Keep up the good fight fellas!
3:17 that’s the Jeep having the PTSD shivers from the war back in nam.
Mine is older and has more miles never ones did I get death wobble. And my suspension was gone
Called a death wobble, want to know fear? Go down a 20% grade in a fully loaded Chevy Express and a death wobble kicks in.
@@pnw.yfz350 mine is older than yours and it happened once and was easily remenised by tightening the bell crank doen
That's a ford
Death wobble ain't no joke
0:37 Hey, he engaged his safety squints.
Yeah that one had me since I'm trying to get into welding myself. I kinda like my eyes more than he does his own I think.
that is a high risk of becoming blind. Always wear a welding mask and welding gloves.
Ironic how Ace of Base I Saw the Sign is playing in the background. 🤔😂
That guy is filling in the bearing lubrication holes for the oil. The engine that's being put in is fucking toast. Not to mention the integrity of the crankshaft being compromised from fucking WELDING it.
He went in the back seat kind of
Imma start a tool company where we just sell 10mm ratchets and sockets in a 4 pack. I’d be rich 😂
I worked for a parts store, we did a challenge for shops, whoever bought the most in the week got a free socket kit containing 2 10mm sockets in it.
10mm rachets? There no such thing as that but ok 😂
@@yzstormer probably meant ratchet spanners.
@@zacclarke8652 maybe.
Yessss!!!
1:15 when the Vtec kicks in
Plot twist: G-forces in a nutshell
At the 9:55 mark....
Mechanic: I think you may need new shock absorbers!
Customer: C'mon, man! The least you can do is *STOP* further disintegrating them by rubbing them with a feather touch, man!!
Relax
I died inside seeing the underside of that yellow Charger Hellcat.
Somebody needed a new frame or put a new engine in, so he kept it simple. If people on the street wouldn't be endangered, I would say "Fucking let them, Darwin was right, natural selection"
Things that make you go ehhhhh
I don't know why. Dodge fucking sucks lol. I'd sooner pay somebody to take me around in a rickshaw than own a Chrysler product.
@@kitchentrout5867 lol they're garbage that's why they're dirt cheap.
I didnt see a hellcat.
I did see a yellow whale though
4:38 Ah the aftermath of doing a "Dude, I think that's clutch" burnout.
clutch, what clutch
Bro I almost pissed myself laughing at the Japanese vs muscle car sounds! 💪🏾 2:50
Some people have too much time on their hands
6:20 "I only have to change my oil every 10,000 miles!"
That's DISGUSTING omg🤢🤢
nah that's more like a 50k miles per oil change
@@cptmiller132 Thats long life.... U don't change this.
Then there's the car where the engine is permanently sealed. All service, such as coolant changes, must be certified OEM.
PH MY GOD THE 10 MM CLIP IS THE MOST ACCURATE CLIP I HAVE EVER SEEN
DISAPPEARS INTO THIN AIR EVERY TIME AND THE GOD DAMN 8MM ALSO
Relax
Including tape measures.
6:38 Every time the commentators in NASCAR try to explain anything about how the cars work.
Dustin heheheehe
When he said you just need a new car I lost it
Bruh I need to find this video
As someone who builds stock cars, they're mostly talking about the aero package, and they're normally pretty close to right
_The _*_topinator._*
8:40
Karen: "Just dump the load in my trailer."
Worker: "But ma'am it won't-"
Karen: "JUST DUMP IT OR I'M CALLING YOUR MANAGER!!!"
Worker: "Okay . . ."
0:37 NO EYE PROTECTION AT ALL. I can't watch this happening. Using your discount store wirefeed to booger-weld a crank is dumb, but when you roast your eyes and have blind spots in the center of your vision, it's gone to reckless.
This is why you do not use the Dollar Trees of the mechanic world, The THX1138lives.
@Patrick Wright That doesnt help
@@sukmikehok2560 Can confirm. Your eyelids are not going to help against arc flash. People don't realize how unbelievably bright welding arcs are.
@@Rogan_Dorn it's physically painful to catch a glimpse 50 yards across the shop, can't imagine how it feels at that range.
Dude just use safety squints. Helps me, now I can look at the sun without sunglasses
7:52 i suppose the 122 rivets wasn't enough :(
Hmm maybe 150?
They where just screws
I saw someone pop rivet a spoiler to the boot with about 200 rivets. We called it a zipper. In full view.
To be fare 121 just wasn't enough. Oh and 121 or 123 is just a weird number. 122 screws I would fire that guy immediately and take his tools!
6:21 Please, just please change your oil at least once in the vehicles lifetime
But BMW tells you to do it every 15K miles ._.
_Oil? What oil?_
@@warpey5632 _Olive_ oil.
7:12 I knew blinker fluid was real!
Lol nice reference
Chris fix doesn’t lie
For all of you who don't know, the "Jeep thing" is a failed steering stabilizer. I've been a tech for 29 years. You're welcome.
Scott your probably just as crap as these mechanic
@@bigtalk7490 That was rude
team bruh tf?
Call me rude when your driving down the road and your front wheels come off . Thank scout for that 29 year at it still cant tighten a bolt .
Ok?
8:46 this llaugh needs a factory recall
*spray bottle intensifies*
At the 0:00 mark my step father and I have had to do similar things over the years dealing with flat tires. What happened at 0:16 mark is our greatest flat tire replacement fears realized.
been there done that. lol
luckily studs aren't usually that hard to replace, but it's a total PITA when you're already dealing with a flat tire. ahaha
3:05 that killed me😂
Nothing like killing your vocal cords for some el oh els. Hah! Seriously though, that was a fairly accurate rendition of American muscle car engine I would figure.
Yes, don't forget mental problems too.
I enjoyed that a lot haha
I died laughing at both of them... That shit was hilarious
Japan: big bong bang
American: ąɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧɧ!
I died at the American muscle sound lmao good shit.
I watch these videos everyday to remind myself that there are a certain breed of car owners out there that I don't want to be driving near
10:04. I'm not a mechanic, but, maybe, ... someone 'MIGHT' need a motor mount ?
Just a shot in the dark.
Bang!
Ping pang!
Ping pang wang!
😅😅😅
AAAAAAAAAAAAAAAAAAAAAAAAA
Such clips help keep the Wuhan Virus away! lol
@@ads1035 i died at the muscle car XD AAAAAAAAAAAAAAAAAAAAAAAA
AAAAA AA A aaaaaAAAAAAAA
I had to stop the vid I was laughing too hard 😂😂
Submit your Mechanical Fails, Customer States, Dashcam videos, or other automotive-related content here 👉 carhax.com
🤗
🤗🤗🤗
😭😭😭😭😭😭😭😭😭🤣🤣🤣🤣
I'll take 3 please
I just feel like something is gunna go wrong with my car now.
Hahaha I drive 88 Chevy truck so it's like walking on thin ice, *hears a crack* shit shit
Inibrasium the first I drive an 83’ S-10,
So factual.
2019 mustang so only 1 year old but I'm hoping no issues I take care of me car
Man I've never had trouble with 10mm sockets. Nor has my dad- we only have one between us and we never lose it. But I have dropped a 6mm wrench into the engine bay of my taurus, to never see it again despite lots of searching, shaking, and quick accelerating and then sharp braking. The engine bay ate it
The part with the guy messing with the vents while he's screaming made it sound like he was trying to go Super Saiyan
6:22 that is a night mare
5:43...happens all the damn time!!!!
Xddd
4:56 Dam what type of engine and vehicle is that? That growling start up sounds monsterious! Sick!
I'm wondering y he same thing I wnana harat that thing straight piped
That's a big block V8, might be a 460 in an old Ford truck
Chevy 357 I know that knock anywhere
I've found both knives and bullets in tires.
I found a bigass bag of coke in all 4 tires back when i was working in texas near the border
The worst thing I found was a 10 mil wrench amd I still use that wrench to this day lol
Location, location, location
Lol I work at a tire shop and ive been very impressed by peoples dumbassity and crazy shit theyve dont to their cars
GTA V
Gotta love that classic Jeep death wobble.
You know that guy at 8:40 was told it wouldnt fit. but hes like, I know my trailer son, I've been using it 20 years it can fit what I'm asking now do it!
Customer is always right
That car at 2:22 was one of the craziest things I have seen, the whole front end is botched to hell and back
1:30 😂
That wind dampener now costs more on gas with that much extra weight genius 🤣
This applies to those with, "If it's not broken, DON'T FIX IT!" mindset.😄
No service needed as long as it runs they say by that.
After years of working on my own cars and doing some mechanic work as a job, i still cannot unsee some of the things ive seen. Had one tounger lady say her car started making a noise in the rear the day before. When we put it on the lift, her passenger rear tire and suspension proceeded to drop out from under the car. It was only hanging on by 1 bolt in the lower a arm.
that 10mm gag is so true it hurts
Lmao at the loader giving the car his load asked for 😂😂😂
8:38 I already know. That old guy was like "No, it'll fit in the trailer, I've measured it you knob end!" And the guy operating the loader was like "I'm telling you sir it will not fit." And the old guy was like "It will fit, I have paid for it now load it into my trailer!" And the operators like "If you say so. 🤦♂️"
9:15 the dullest end is what punctured the tire? Hahaha!
When I saw that I yelled "NO F'N way has to be fake" I had the EXACT same thing happen to my truck. The tire shop gave me back the side cutters and I still have them. That clip is not from my truck, I had Silent Armor trucks trucks.
IIRC I broke 4 separate hangars for the end of my exhaust in the first year I had my truck.....and the coathangar I used as a quick fix is still going strong to this day 5 years later
I need help replacing my muffler in my 85 Chevy
0:10 this is why i do my own wheels and lugnuts.
I hate impact tools.
Sincerely,
An aircraft mechanic.
Ford lug nuts have a known defect that causes them to rust and seize up
9:39 two cars one cup lmao 🤣
Okay that civic and the guy just laying his seat back when he floored it was funny as shit
Who else has been binge watching weird videos like this for hours due to quarantine
Gotta admit the 10mm one was really funny.
ive been going through a lot of these comp's and i have to say theres a LOT of ridiculous shit happening in the world of automobile mechanics 🤣🤣🤣
i almost pissed myself at the 10mm
When he pulled that motor mount off at 2:00 I felt his pain. Mazda 3 owner here 😂
Come on guys, the car just wanted to give you peanut butter 9:36
Adleast to the damages were easy to spot😆
The opening clip is why I don't let les schwab touch my vehicles ever again. Had a blow out 300 miles from home, broke 2 of 5 studs trying to get the lug nuts off.
I laughed so hard at 5:44 because it's soooooo damn true!!!!
The only way to not lose the 10mm is to work on classic American cars I believe... otherwise that thing is gone.
BBCharger5spd 84 Chevy Caprice and I for some reason have metric bolts🤣🤣🤣
Omg, the imports vs US sound had me rolling.
6:02 it's the lego movie all over again
When the guy did the butterfly injected hat linkage, sounded like Sam kinnison.
Do u want to race ??
I'm dead 😂😂😂
10:09 - The End is BEST! :D
The steel wirr trick is basically to make it to the garage without losing the whole pipeline.
9:34 thats how peanut butter gets produced
that's fking mustard xDDD
I like to see when someone thinks there is either no problem or the problem is minor when it's actually a major problem. Like the "yeah, I ran over something sharp..." *wire snips in the wheel, handle first* "yeah, just a little noise..." *giant hole in the engine*
yeah, like 3:25 lol
4:29 definitely OSHA approved
Mechanics don’t care about osha till they do a inspection then they follow the rules
2:50 this is really a mechanic problem so big problem that it cant even drive
What?
Always remember to keep the air in your engine. Why does this remind me of something a Cadillac owner would say before a total engine replacement
Bit dangerous to let your dog that close to a sideways mustang 😂
4:15 Once saw a car with coolant like that. It clogged up the coolant system, causing high pressure in the radiator and a blown head gasket. The vehicle was totalled and is now being converted into a simulator.
1:20
I remember when I was a lube tech at a Hyundai dealership and we got a custom Hellcat Challenger in (car was bought at the dealership with an unlimited oil change policy thing)
It had a real splitter on it and we had a lot of trouble getting it off to get to the oil cooler and we can thankfully say that it was fastened with about 100 less screws than that faux carbon "splitter"
9:00 Inflate the wheel 1.7-1.6 barrels. And notice, sprinkle the colia with salt. And there will be happiness. Надуйте колесо на 1,7-1,6 баррелей. И обратите внимание, посыпьте колия солью. И будет счастье.
6:05 So that's how I literally lost every 10mm socket, including: 1/4, 3/8, 1/2. Like wtf...
2:18 that welding job, that's what I call "custom build:
6:38 every mechanic that tries to explain non existent problems or fake problems to get money or would sell you a new car if they could.
And certain service advisors trying to upsell.
I feel like the guy at 6:40 is kidding but this is why people get mislead from car repairs. A mechanic will tell them they need all this stuff but it's not needed. I know that's how service shops make money so yall just keep on keepin' on 💅🏽
6:38 ghetto chrisfix
Hahahahahahaha
So true
_The _*_topinator_*
@@warpey5632 the power *stern* fluid
warpey that’s what a girl is
8:00 Every single shopping trolley cart in the supermarket.
I clicked in this because I once owned a 64 Impala, that had motor oil that was tan when I bought it, but at time stamp 0.39 I’m shocked at Mr. Domass welding with no darkened face shield, welding helmet or darkened goggles.
I love you for these videos
Priceless!!! Customer wants me to put it back on....call a wrecker and you can do it.
I love the fact the Mustang drifting clip is of the Drift Session on Market St. at the St. Louis auto show every January. I used to live in STL
I love this channel its very funny
0:38
Nothing wrong here..gotta engage that safety squint.
0:58 Honda owners, when VTEC kicks in.
Gosh these bring back so many expensive memories.
The 10mm, omg i died! Lmao
The 122 screws in the carbon fiber lip is impressive af that thing will never fall off
To see the carnage on these is funny as hell . That why I make truck payments so this crap won’t happen to me .🤣🤣🤣🤣
That damn 10mm!
First video of this, been there done that couple times
Peter Kapica eh jus gotta torque them til they start to get loose again👌🏼👌🏼
The 10mm bit... Hilarious, yet true.
That’s why they needed the carbon fibre because they knew how many screws they were going to use on it so the weight savings balances itself out
I was fixing up a buick for when I get my lisence. We needed new rear shocks cause one of em was snapped in half...
1:40 I think that guy may have been Scottish 🤣🤣🤣
Doesn’t wanna pay for a part more than once!
not gonna lie that 10mm got me XD
0:51 had me rollin 😂
Blinker fluid, see, told you!!
123 screws he had to take them all out that shit got me 😂😂😂
I used to have a Dodge 1500 with a big lift on 44s that would get the "Jeep" death wobble.