Thank you so much for this comparative video. 🙏 Thank you for your very honest opinion. 👌 As for me, I chose the MJX 14210 for 218€. I can't wait to receive it. 🤩 I really enjoy your videos. The playground looks so much fun. Thanks again for your video. 😁
Oh dude 👍. I hope you get a good one . My controller came locked and it was set perfect . That’s about the only thing I know how to do with the controller too is lock and unlock . It’s great out of the box imo . Mine came silent a f and cushy . Like a sensored combo at slow speeds but it’s not . She gets to speed quick without lifting up and lands nice for 4-6ft high jumps . Don’t go big or the e clips might pop off under the pistons . You ll know if it starts jumping not straight amd the wheel falls fast after compressing . It ll be fine . I had no issues until after 40 packs or so they can’t take some jumping and it’s an easy free fix if you have the extra clips or bettter shocks . I haven’t found any replacements as the stocks do well . The gdool 4.3” tall track looking tires do better in grass
Today I went on huge Jump with my 10280 20 feet in the air. I landed on my wheelie bar vertical in the air. Any other heavy Truck would of ripped the wheelies bar off. The 10280. Very flexible plastic i could not believe it didn't break !! Great Truck such a bargain at $359. I love this truck ❤ mines V1..
This really is a good little RC . I just did all the diffs and the best way I’ve found to take out the center is remove the chassis braces , the one servo screw to let out the one side of the chassis brace , remove the plastic piece over the center diff and then remove remove the whole rear wheel assembly from underneath and be careful with them little 1.5mm under the rear pin holder . One of mine stripped and I tapped in a t6 bit but it don’t have to be super tight . That’s a long 1.5mm I didn’t have anything close to its length . Yeah , best way imo . 500k in the center f60 r 30wt feels good . Spins around nice and doesn’t lift too much unless punched but won’t stay up . I had to file the sharp edges off the s2 rear diff cups to keep from eating the dog-bone pins . So a set of outdrive cups or 2 , a set of rear dogbones and a driver is good for 100 packs depending on the drivers throttle skill .
Does this mjx model have a dead zone on the trigger? Meaning you can press 1/4th of the trigger already from neutral, and it absolutely wont go (unlike a throttle delay where you press that 1/4th, and it will go, just ofc late)? I remember in their much earlier models, it had that, which didnt want.
Would you mind sharing your setup on both trucks, diff fluids. Or are they all box stock. Thank you, love the videos, and you are blessed with a great place to run RC trucks.
I was just watching your MJX vs MT10 and found this gem of video. Now I am even more stuck haha. I think I will go with the Omni since it’s probably better for a newbie like me getting into RC’s. It’s on Amazon for $199.99 and free shipping. What battery do I buy on Amazon that you recommend so I can add it to my cart? Anything else you recommend I order for it? Once I get the hang of it and get the experience I will graduate to something bigger/faster.
Loves your videos. Is that a bmx track you drive at? If so has anyone complained about you driving there? I’m thinking about trying one near me. Thanks!
Hello, could you explain what is the benefits to buy the upgrade kit v2 if you already get the V2 version of the MJX 10208? Thank you for your feedback.
I think the MJX was let down by releasing the V1 & then soon after launching the much improved V2. Heads up to MJX though for admitting they didnt get the V1 right.
@@tomasborovian the Omni definitely is setup better , the mjx needs a shock tune for sure , for driving and handling the Rlaarlo wins , but i love both
What is that noise in the background? It sounds like you're in the jungle. It sounds like monkeys, or birds. Really curious because it's in all your videos. By the way you're one hell of a driver. 👍
You're absolutely right I have the carbon version and that thing is a tank. I have not broken anything on this vehicle and I bash it pretty darn hard. What I don't get with some people is if you have a Traxxas and you have to replace the servo that's okay to them. But if you have a Chinese car and have to replace the servo they call it Chinese junk. I just don't understand it.
@andrew4403 yes unfortunately thats how some ppl are .... I love all rc's and dont snob any brand ... If its good i dont care what brand it is ... The omni Terminator is a killer car !!
Thank you so much for this comparative video. 🙏
Thank you for your very honest opinion. 👌
As for me, I chose the MJX 14210 for 218€.
I can't wait to receive it. 🤩
I really enjoy your videos.
The playground looks so much fun.
Thanks again for your video. 😁
@@karlnacreon thanks for watching ..... Enjoy your Mjx mate 👍🏻
Great bash! Can't wait until I get that Omni out. Seeing these vids are really getting me impatient🤣
@@ReadySetRC thanks man
Its such a good car !! Can't wait for you to rip on it
Oh dude 👍. I hope you get a good one . My controller came locked and it was set perfect . That’s about the only thing I know how to do with the controller too is lock and unlock . It’s great out of the box imo . Mine came silent a f and cushy . Like a sensored combo at slow speeds but it’s not . She gets to speed quick without lifting up and lands nice for 4-6ft high jumps . Don’t go big or the e clips might pop off under the pistons . You ll know if it starts jumping not straight amd the wheel falls fast after compressing . It ll be fine . I had no issues until after 40 packs or so they can’t take some jumping and it’s an easy free fix if you have the extra clips or bettter shocks . I haven’t found any replacements as the stocks do well . The gdool 4.3” tall track looking tires do better in grass
Today I went on huge Jump with my 10280 20 feet in the air. I landed on my wheelie bar vertical in the air. Any other heavy Truck would of ripped the wheelies bar off. The 10280. Very flexible plastic i could not believe it didn't break !! Great Truck such a bargain at $359. I love this truck ❤ mines V1..
@@philpowell1162 thats awesome !! It's definitely a solid machine , I'm loving mine
This really is a good little RC . I just did all the diffs and the best way I’ve found to take out the center is remove the chassis braces , the one servo screw to let out the one side of the chassis brace , remove the plastic piece over the center diff and then remove remove the whole rear wheel assembly from underneath and be careful with them little 1.5mm under the rear pin holder . One of mine stripped and I tapped in a t6 bit but it don’t have to be super tight . That’s a long 1.5mm I didn’t have anything close to its length . Yeah , best way imo . 500k in the center f60 r 30wt feels good . Spins around nice and doesn’t lift too much unless punched but won’t stay up . I had to file the sharp edges off the s2 rear diff cups to keep from eating the dog-bone pins . So a set of outdrive cups or 2 , a set of rear dogbones and a driver is good for 100 packs depending on the drivers throttle skill .
You talk about the mjx or the omni?
Thats such an ideal playground to run and test rcs,its not all about skate parks and trying to break them.....they both ran awsome out there💪🔥
Its literally the best spot for cars !! Not a fan of skate parks or watching videos where ppl break them on purpose lol
Thanks man
Both looked like a lot of fun! I like the beefier size of the MJX but either one look like a great time!
@@AddamsPlayground I'm having a lot of fun with both , can't go wrong with these cars 👍🏻
If you have the choice of to RCs.The Arrma Big Rock 6s or the Omni T. Witch one would you take?
Lol two very different cars mate
out of curiosity, which ovonic lipo battery are you running in this?
@@babolimp rebel series in the MJX
Does this mjx model have a dead zone on the trigger? Meaning you can press 1/4th of the trigger already from neutral, and it absolutely wont go (unlike a throttle delay where you press that 1/4th, and it will go, just ofc late)? I remember in their much earlier models, it had that, which didnt want.
@@lyricofwise6894 i don't use the stock transmitter , im using the DumboRc ddf350 and no issues
Would you mind sharing your setup on both trucks, diff fluids. Or are they all box stock. Thank you, love the videos, and you are blessed with a great place to run RC trucks.
Hey mate
50k 100k 30k is normally my setup 👍🏻
@@kaosr.c Thank you so much, I am new to RC cars.
Hi mate. What ovonic C rate you run in the terminator?
@@Shaun0574 i use the stock lipo it comes with 👍🏻
Great video as always. Im gonna go the terminator carbon i think... about $80-$100 cheaper. But ill probs get the MJX aswell eventually lol😂
The extra cash will get me a good OVONIC battery 😊
Good choice ! Both are a lot of fun !
What size batteries are you running on each? 2200?
@R_Swilla only 2200 on the OT and a ovonic 6500 4s on the V2
@@kaosr.c thanks brother I appreciate your videos greetings from Chicago Illinois USA
I was just watching your MJX vs MT10 and found this gem of video. Now I am even more stuck haha. I think I will go with the Omni since it’s probably better for a newbie like me getting into RC’s. It’s on Amazon for $199.99 and free shipping. What battery do I buy on Amazon that you recommend so I can add it to my cart? Anything else you recommend I order for it? Once I get the hang of it and get the experience I will graduate to something bigger/faster.
You do get a lipo with it ... Id recommend getting a couple of the stock ones ... They work perfectly fine
Thank you for the advice!
Loves your videos. Is that a bmx track you drive at? If so has anyone complained about you driving there? I’m thinking about trying one near me. Thanks!
@@kirbincap8307 thanks man
Yea its a bmx track ... No one complains 👍🏻
Im liking the omni terminator
Yea mate it really is an awesome car
I got v2 for $306 also purchased the v2 upgrade kit for $74 and the parts/ spares I now have is killer
@@JohnkLawrence nice mate 👍🏻
Hello, could you explain what is the benefits to buy the upgrade kit v2 if you already get the V2 version of the MJX 10208?
Thank you for your feedback.
@@karlnacreon it gives you a lot of spare parts for cheap
@@tap9083 ok ok, thank you. 👌
I got the redcat valkrie and vigilante for xmas!
@@masonhanft7158 oh nice man 🔥
What a score! I got the valkyrie MT and a DJI NEO with 3 batteries and goggles n3. And i can't fly cuz its pissing rain 😂😂I feel your pain haha
I think the MJX was let down by releasing the V1 & then soon after launching the much improved V2. Heads up to MJX though for admitting they didnt get the V1 right.
@@gillian9178 yea thats probably it !! I can say the V2 is a little tank and a fun rc... Im loving it
Great video... What do you ride better? The Omni looks great, but it's a shame it's smaller than the MJX. Looks like the mjx has bad dampers.
@@tomasborovian the Omni definitely is setup better , the mjx needs a shock tune for sure , for driving and handling the Rlaarlo wins , but i love both
@@kaosr.cThey say that the biggest problem is the upper shock absorber bowl. The mounting screw will bend... 🤷🏻♂️
What is that noise in the background? It sounds like you're in the jungle. It sounds like monkeys, or birds. Really curious because it's in all your videos. By the way you're one hell of a driver. 👍
😂
@@andrew4403 😆
Thats just typical Australia mate ... Those are white cockatoo's making all the noise ... Thanks man 🔥
Happy Boxing Day!(?)
I think the MJX is hotter because it is also bigger
@@Hasret-Gultekin its definitely a fun rc 👍🏻
Omni terminator is an absolute beast.
Hell yea ! One of my favorite's
🔥
You're absolutely right I have the carbon version and that thing is a tank. I have not broken anything on this vehicle and I bash it pretty darn hard. What I don't get with some people is if you have a Traxxas and you have to replace the servo that's okay to them. But if you have a Chinese car and have to replace the servo they call it Chinese junk. I just don't understand it.
@andrew4403 yes unfortunately thats how some ppl are .... I love all rc's and dont snob any brand ... If its good i dont care what brand it is ... The omni Terminator is a killer car !!