Restoration Welding Machine Old 200A left behind for months

Hello everyone, I have an old Welding Machine that I left behind many Months ago, and I restored it to its original state 95%. Please support me through Like Comments & Share Thanks 🙏🏻
+ Specification
- Brand WELDARC TYPE MMA200A
- Output AMP 200 AMP
- Power 8.1KVA
- Pilot Arc Current 20-200A
- Voltage 220V ±15% ( single phase)
- Frequency 50 Hz
+ Accessories
- Paint Remover = 4$
- Spray Surfacer = 4$
- Spray Color Cream = 2$
- Spray Color Black = 2$
- Spray Color Blue = 2$
- Spray Color Red = 2$
- Spray Color White = 2$
- Spray Color Clear = 2$
- Mosfet TOSHIBA K2837 = 1.5$
- Panel Socket Welding 2 Goals = 5$
- Fan Guards = 1.5$
- ST-GT-01B 2 = 4$
- Gacun = 6.5$
- Rocker Switch 30 A = 4$
- potentiometer knob = 0.5$
- Power Cord​ 2.5m = 5.5$
- Total Money = 48.5$✔️
👉🏻 Help me 100K subscribers 🙏🏻
/ restorationvs
👉🏻 Antique Hand Cranked Wood Drill - Restoration
• Antique Hand Cranked W...
👉🏻 Restoration a Destroyed iPhone 5s Old Found at a landfill
• Restoration a Destroye...
👉🏻 Restoration Old Air Compressor Machine | Nothing is impossible | Restore air Compressor 36 Liter
• Restoration Old Air Co...
🙏🏻 Thank you for watching this videos 🙏🏻
#restoration
#restore

[@RestorationVS]

Thank you for watching this video. Please subscribe to my channel to get the latest videos. 🙏🏻 👉🏻 ua-cam.com/users/RestorationVS

[@joycebarnhart54]

lk

[@joycebarnhart54]

'x

[@dennyarcano2470]

Amazing job man!!! Incredible, really!

[@2017KKK]

@@joycebarnhart54 2

[@kazemseaalebi5646]

میخرم

[@JanJanson84]

Great Restoration, BUT, you have to scratch the paint when mounting all ground connections to the chassis! This is very important, especially for the PE connector. The RCD will never trip otherwise when someone comes in contact with a live chassis if a failure occurs!

[@RestorationVS]

Thanks for the tip! 😊❤️

[@FluxLabsProjects]

I don't think this guy even cares, if you've seen his extension lead it doesn't even have a PE conductor.

[@yeet3071]

@@FluxLabsProjects what's a pe conductor

[@tylersheehy3918]

I know I'm in USA is rca same is gfci

[@FluePeak]

@@yeet3071 Pe is the green cable used for Grounding or otherwise called Protective Earth

[@adeh503]

I don't know what's more impressive here.. The fact that you've built yourself a brand new welder or the fact that you know where everything goes when you put it back together 👏👏👌

[@enclaveofficerz3245]

Expansive documentation is required before even touching the object to restore it. You need pictures, and notes on things you have removed as you go.

[@woodworkingandepoxy643]

​@@enclaveofficerz3245 oh now I read this after tearing apart lord knows how many items and just end up with extra parts when putting it back together

[@Jraifamilyophanlan]

Thank you so much for sharing. Like +1🛎🤝👍♥️♥️♥️

[@RestorationVS]

Thank you 😊

[@sundaymwita8228]

such a lovely work of restoring a welding machine. big up

[@RestorationVS]

Thank you 🙏🏻❤️

[@davidtyndall8880]

I just restored my 50+ year old Crsftsman AC arc welder and added a DC function. I used the same cable connectors that you did only I had to make my own holse for the connectors. Worked out great. Very good video and work.

[@RestorationVS]

Thanks for liking my video :) ❤️

[@myriadtechrepair1191]

I love seeing people put some love into old devices. I may not be familiar with welders but I do computer motherboards and some of the stuff I've fixed would have been scrap without a little love.

[@RestorationVS]

Thanks :)❤️

[@nightmareinaction629]

Doubth is that old it's igbt probably no more than 5 years

[@user-wy9yd5lx8i]

Хорошее видео но ещё лучше сама работа.
Спасибо за красивую работу своими руками.

[@RestorationVS]

Спасибо, что понравилось мое видео

[@user-wy9yd5lx8i]

@@RestorationVS скачал архив пытался заказать печатную плату на вашь прибор НО дешевле его купить готовый в Китае чем сделать самому.

[@user-so2ep5um6p]

...thank you very much... form thailand 12 november 2022

[@RestorationVS]

Thanks for watching my video ❤️🙏🏻

[@user-rc7dv7hd3g]

красиво, качественно, приятно было смотреть, молодец

[@RestorationVS]

🙏😊

[@poorchava]

Well done. Unlike some of the other "restoration" channels this looks genuine. At least it's not an electronic device that have been laying in mud for a year and magically all boards work after cleaning with tap water.
There's some actual electronics repair going on here. I'm kind of amazed that only one MOSFET failed. Those usually fail in pairs (both high and low switch in a half bridge)

[@RestorationVS]

Thanks for liking my video 😊🙏

[@armandoarturorosabalsanche7173]

Well done my friend, from, Bayamo, Cuba

[@RestorationVS]

Thanks 🙏🏻❤️

[@dannraff]

Fantastic rebuild its brand new again .Thanks for keeping me to your channel.

[@RestorationVS]

Thanks for liking my video 🙏🏻❤️

[@kilo8881]

An amazing restoration! I would recomend a hard plastic or metal cleaning brush or scrub brush for paint removal. They don't damage the metal and are easy to clean, plus it makes the removal easier and less time consuming.

[@RestorationVS]

Thank you so much 😊

[@mywindow9929]

I was surprised by how good things turned out despite what he used. I prefer to use Steam, Dishwashers, Ultrasonic, Wire Wheel and Air before I ever lift a brush.

[@user-ph5ow7cq1m]

Исходя из логики этого реставратора, то сломанную ногу достаточно помыть и кости в ней срастутся?🤔

[@user-gd2yj3xc4m]

Помыл то, что мыть не надо (протёр и все), в платы бы так залез с водой))

[@user-vo1gy7np3y]

Кожух он поставил как-раз правильно

[@user-nf6cu7ld5u]

Аеан

[@georgecolon2786]

The best one I seen so far is this one, that is more than a restoration, is an art with style.. You are the master....

[@RestorationVS]

Thanks for liking my video ❤️🙏🏻

[@DarienCaldwell]

I like that he went to the trouble of making or buying a sticker for the fan, then put it on the inside where nobody can see it.

[@PersivanA]

"ЗДРАААСЬТЕ"
Зачем я доктора смотрел?(( Теперь ни одна реставрация не приносит удовольствия(( Очередной видос в обратном порядке

[@Innaui]

Т.е чувак берет новый аппарат и состаривает его вхлам?

[@PersivanA]

@@Innaui я не сильно всматривался в происходящее на видео, лишь заметил что весь корпус после покраски выпрямился, оброс металлом, пропали вмятины. Ну посмотрите доктора он объяснял как горе реставраторы снимают свои видео.

[@PersivanA]

@@Innaui ну да. Вот "первая" разборка и там кабельные стяжки которые расположены в тех же местах что и в "будущем"

[@memesdesu]

Согласен. Пиздеж пиздежом, а народ балдеет

[@autobotjazz1972]

Real clear that welder had a hard life before it was tossed out, glad to see it restored and working again.

[@RestorationVS]

Thanks :)

[@autobotjazz1972]

@@RestorationVS you very much welcome

[@roypjohno8118]

HAI GOOD EVENING SUPER VIDEO SUPER IDEA SUPER JOB SUPER Thanks 👍👍👍👍👍👍👌👌

[@FAUZIAKBAR89]

Kalau menguasai electric..smuanya jadi bagus. Bisa berguna lagi. Good job sir my from indonesia 🇮🇩🤝

[@RestorationVS]

Thanks for liking my video :)

[@theelmonk]

I think I'd start by making sure of the electrical fix before I did such an exquisite job on the paintwork :)

[@wowgaming1335]

looks completely new after restoration, amazing work

[@RestorationVS]

Thank you for liking my job ❤️

[@schedule4523]

Exelente video.
Consejo, antes de soplar un abanico, debes desconectarlo, genera voltaje y vas a dañar los circuitos.

[@markfuzile2766]

Being one of the technician i give you big thumbs up boet, well done. That's interesting lesson, God bless you.

[@RestorationVS]

Thanks for liking my video ❤️

[@myriadtechrepair1191]

That old voltmeter is gorgeous

[@ershvv7567]

Класс!!! Отличная работа!!! Респект!!!

[@kolasaikiranyadav8309]

Best restoration video

[@RestorationVS]

Thanks 🙏

[@martonfekete1140]

Majdnem pofára esett a srác, de örülök hogy sikerült!

[@ShadowRune]

Impressive how you got around not having a color decal printer that was a lot of work but the results were very good. You really shouldn't clean pcbs with gasoline though, it's rather rough on what can be delicate traces. Isopropanol alcohol is the preferred method

[@RestorationVS]

Thanks for liking my video :) ❤️

[@ryan-uu9lj]

Honestly, given where he's at, isopropyl may not be as accessable as it is where you or I am. Gotta work with what you can get.

[@Silver_Turtle]

Won't argue with either of you; as you're both correct.

[@sams6090]

@@ryan-uu9lj if he's got access to a welder, gasoline, and the internet then there's a huge chance he's also got access to any number of proper cleaning substances.

[@sams6090]

the danger isn't just with the traces but with the enamel that is on the transformer's wiring. The gasoline will absolutely start to dissolve that coating as well as cause it to be far more brittle. Over time that will lead to the windings shorting out and causing a serious dangerous situation to people and the building itself since it could electrocute someone as well as cause a fire.

[@Austeration]

Brilliant job mate 👍 I really enjoyed the stencil work and the detail in your restoration. Looks fantastic. Liked and Subscribed

[@RestorationVS]

Thank you colleagues 🤝

[@mattlawton4715]

@@RestorationVS you put the top on backwards was that intentional. Great video keep them coming 👍

[@abahdanik1787]

Jdncv

[@salmagana2698]

Nothing better than a new welding machine,...

[@funky8479]

That's so good restoration, that author get another welding machine, with corpus and model, different with old device:)

[@RestorationVS]

Thanks for watching my video :)

[@seansysig]

Amazing restoration. A couple of those capacitors looked like they were bulging and in need of replacing.

[@sergunchik62]

Откуда на корпусе вентилятора резьба ?(изначально все было на заклёпках)
Куда делись отверстия от саморезов на крышке корпуса? (была прикручена металлическая ручка )
Как восстановился конвектор который на плате вместе с проводом отвалился ?

[@krisjunior5156]

Нас на..ли. Расходимся. И кстати корпус можно было шпатлевкой выровнять.

[@agens9538]

Съёмка в обратной последовательности, это развод

[@yulashin1102]

Включил и залип.

Merhaba temiz işçilik temiz ustalık çok beğendim kolay gelsin 👍👍👍

[@agnaldoefilhos]

Caraca, ficou top demais, parabéns.

[@wallengomes574]

Parabéns ficou muito bom,DEUS continue te abençoando, parabéns mesmo ótimo trabalho 👏👏👏👏👏👍👍👍

[@RestorationVS]

Thank you so much 🙏

[@skylidu1039]

It seems to me that this is not only a restoration, but also an asmr

[@roypjohno8118]

Hai Good Evening wow Super Video Thanks

[@davidgustavomacedo1038]

Parabéns pelo esforço.

[@Subgunman]

Very nice restoration and repair! With all the time spent on the restoration I would have used some automotive epoxy bondo to fill in the minor imperfections on that front panel.
Are the labels on the back original from the manufacturer or are those something you printed?
I can't believe someone would trash such a piece of equipment and then throw it out when it quit working. Treat your tools well and they provide you years of reliable service!

[@RestorationVS]

Thanks for liking my video ❤️

[@user-uw2dj9lq3c]

ты мастер молоденц замена новый лайк

[@Wowmechanics1]

The Mechanics' Magic

[@zakrytikzuk]

Лучше бы показал как он металл выпрямлял что бы следов не осталось.

[@reghasell3921]

That was actually quite enjoyable to watch, well done mate, good job.

[@RestorationVS]

Thanks for liking my video ❤️🤝

[@mithunroy9579]

আপখ

[@mithunroy9579]

আআপ পা

[@mithunroy9579]

@@RestorationVS আমি আপ

[@mithunroy9579]

@@RestorationVS ট আট

[@manjoosruchiabhiruchi2737]

When you blowed the fan it sounded like sirens 🤣

[@RestorationVS]

😁😁

[@AKG1963G]

Πραγματικά πολύ καλή δουλειά συγχαρητήρια 😊

[@electronicshelpcare]

Good job 👏👏👏👏 dear friend

[@RestorationVS]

Thank you my friend 🥰

[@volneisoarespimenta6555]

TOP. Uma obra de arte! muito bom mesmo.

[@RestorationVS]

Thanks 😊

[@ardapnar1660]

Afferin güzel olmuş

[@gustavofernadez2200]

Wonderfull magnifico

[@reiner0609]

When did the loose spade connector of the yellow cable magically solder itself into the lower board? 😉

[@Denis_Ka]

32:28 вентрешетки со стороны питающего кабеля
32:30 вентрешетки со стороны сварочных кабелей
Если аппарат не работал до реставрации, почему он должен заработать после такого варварства?!

[@user-sv5oq1bd1t]

Наверное потому, что параллельно с реставрацией был проведён ремонт: заменён целый ряд деталей, в которых вероятно имелись поломки - заменён силовой транзистор инвертора, мелкая плата управления, питающий шнур (в котором возможно был обрыв), кнопка вкл. Ну и просто промыты бензином все контакты (которые скорее всего окислились неслабо). В большинстве случаев этой простой операции бывает достаточно, чтоб аппарат заработал.

[@Denis_Ka]

@@user-sv5oq1bd1t Транзисторы и дежурки без причины не стреляют, не горят. Есть каналы по ремонту сварочного оборудования... показать бы им данный ремонт

[@valeriikriklivskii7473]

При замене транзистора неплохо было б и остальное проверить а не только на пробой между ногами

[@Denis_Ka]

@@valeriikriklivskii7473 100%

[@MrLeonleopard]

там еще на корпусе дырки от "неродной" ручки исчезают... а на нижней плате есть перемкнутая релюшка (плавный пуск), но при включении слышно что она щелкает и он работает

[@agwbcfjc2]

Another display of skill and knowledge wonderfully videoed. Bravo! Thank you for sharing.

[@RestorationVS]

Thanks for liking my video 🙏❤️

[@teemo1947]

والله يساتهل ٢٠الف لايك Very good 100,000 like 👍 nies

[@joaopaulonobre643]

Perfeito👏👏

[@shamrock1961]

I don't think I would have used gasoline to clean those circuit boards

[@lordkaicer]

Yes acetone or even 91% iso alcohol would be much better

[@standonald5145]

First class restoration , many a person would have just thrown the welder into a skip

[@bertschalk1798]

Great job and very satisfying to watch !!
BTW....saw you cleaning he PCB's with gasoline ? The professional reconditioning firms (Cleaning up after smoke damage caused by fires etc.) throw everything in warm water with mild soap ! Even CRT's (who still uses these ??) can be submerged completely. The trick is the drying process...... First they clean with soap, rinse with water, air-blow it dry and rinse again with de-mineralized water. Airblow again and dry for 24 hrs. min in 35-40 degr. Celcius moving air (running fans). Results are factory new !!
Nevertheless......awesome job !!

[@RestorationVS]

Thanks 😊

[@WalaUlo]

Old? It has QR stickers inside, so it's limited how old it is. This model is a chinese produced privat label brand, that are still sold to this day. Scary that a 10-15 year 'old' welding machine is in this poor condition. I have used +30 year old welders, that was still 100% , But those were ofcourse not cheap chinese.

[@PunakiviAddikti]

Yeah it does look like the previous owner really abused this poor machine.

[@papap9379]

thats empressive restoration! greetings from Philippines

[@RestorationVS]

Thank you very much 😊🙏

[@rukhsanabibi3836]

Great job thanks for sharing 👏😊👍🏴󠁧󠁢󠁥󠁮󠁧󠁿🎈

[@RestorationVS]

Thank you for liking my job 🥰

[@longcurly]

Thật tuyệt.bạn phải rất am tường

[@ganikudul674]

Good joob bos😁👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🇲🇨

[@RestorationVS]

Thank you so much ❤️🙏

[@vanhetgoor]

बच्चों के खेलने, मुर्गों के बकने और गावों के पीछे लंबी दूरी तक चलने वाली कारों की पृष्ठभूमि में आवाजें सुनना बहुत सुखद होता है। यह इतना आरामदायक माहौल देता है। एक माँ किसी भी समय एक कप हॉट चॉकलेट लेकर आ सकती है, या अगर दोपहर हो चुकी है तो एक ताजा नींबू पानी। यह खुशी की आवाज है। दुनिया में हर समय एक पुराने वेल्डिंग ट्रांसफॉर्मर के साथ चैट करने और फील करने के लिए। यह वही है जो मुझे लगता है कि स्वर्ग जैसा दिखता है, उन सभी स्वर्गदूतों की धड़कन के बिना जो दिन भर प्रभु की स्तुति गाते हैं।
I thought it is India (The Jewel under the Republics) therefore I took the freedom to let Google translate my remarks into Hindi.

[@user-jr8gp2en9b]

I like it, very goog job ,you are professional.

[@RestorationVS]

Thanks for liking my video 😊

[@By_Da_Production]

thank you very much the knowledge is very amazing for me mastee

[@RestorationVS]

Thank you so much ❤️

[@pulpo439]

Muy Buen Trabajo.

[@RestorationVS]

Thanks ❤️

[@crazycarl9484]

great restoration, thanks for sharing

[@RestorationVS]

Thanks for watching 🙏❤️

[@mywindow9929]

Your work ethics exceed your creativity and craftsmanship of which are in abundance. Thank you for the sharing of such a positive video!

[@RestorationVS]

Thanks for liking my video

[@Spahmed777]

Really you are genius 👏 🙌 👌

[@RestorationVS]

Thank you so much :)

[@sorryaudi7061]

คนไทยนิหว่าาาชอบมากคลิปสุดยอด

[@haroldpalmsesq2506]

That’s got to be one of the best functional restorations I have seen on youtube yet.
I think a better job could have been done on prep and paint on the front panel. But that is just nitpicking. Great job.

[@RestorationVS]

Thanks for liking my video :) ❤️

[@diverpoa]

Nice and clean restoration,very nice watching your work,👍🏻

[@RestorationVS]

Thanks for liking my video

[@muhammadsuhail2256]

Smart finish

[@tombarlow6176]

Brilliant restoration of the welder

[@josepcb2882]

Mejor que nuevo. Felicidades. Saludos desde Barcelona Catalunya.

[@kasimrashk]

انت اكثر من رائع لك مني كل الاحترام

[@user-gd4fg2im6q]

Πολύ καλή δουλειά!! ΜΠΡΆΒΟ ΣΥΓΧΑΡΗΤΉΡΙΑ!!! 👌🇬🇷!

[@CrazzlY]

BEAUTIFUL restoration! Greetings from Sweden!

[@RestorationVS]

Thank you very much 😊👋

[@carlmcgee1623]

Another work of art. JOB WELL DONE !!!!!!!!!!!!!!!!!!!!!!!

[@objection_your_honor]

From trash to treasure.
Good job.

[@jesusr.hidalgof.1732]

Excelentes videos de restauracion, muy realistas y trabajos muy limpios saludos desde Puebla, Mexico.

[@RestorationVS]

gracias por darle me gusta a mi video ❤️🙏

[@liongaming8026]

Great job.... ❤❤❤❤❤❤❤❤❤❤❤❤❤❤ii love this work

[@RestorationVS]

Thanks 🙏 ❤️

[@alexmakarov9233]

friend, build yourself a homemade sandblaster, you really need it

[@jawadabbas6345]

احسنت روعة

Wow ! Thật tuyệt vời

[@RestorationVS]

Thanks 😊

[@pieterjakarta8044]

thank you buddy the tutorial is very interesting i enjoy watching it

[@RestorationVS]

I'm really glad you liked my video 😊

[@kingoftrading75]

you do very well

[@RestorationVS]

Thanks 🙏

[@user-fp9mq9vx5o]

молодец лайк за труды🙂😉

[@RestorationVS]

😊🙏

[@williamthomason7646]

Dude is amazing...period

[@RestorationVS]

Thanks :)

[@ahmetcenetmedia350]

Şahane emeğine sağlık paylaşım için teşekkürler

[@RestorationVS]

So glad you like it 😊

[@kapergory]

Good job, you just put the case on the other way 😁

[@user-lq1ov7wj9b]

Super, klass👍👍👍💯💯💯

[@RestorationVS]

Thanks for liking my video 😊

[@hungvuong6050]

một người thợ giỏi 😊

[@electro_solar]

All that work in 34 min. Great video. U are epic master :)

[@RestorationVS]

Thanks 🙏❤️

[@carlogiannattasio1860]

WHO...BRAVO,BRAVO,BRAVO INCREDIBILE WORK..

[@janang2961]

Đức Phúc tuyệt vời. Giọng hát ấm áp và hay quá