Wow, you’ve basically covered all the fuse tap points and alternatives, very impressed. I also like the camera angles. I looked at several videos, but your camera angles and basically all of your explanations for different methods are all appreciated, thank you!
Because of you I was able to tap into my fuse box using a new fuse holder. Because of you I was able to bypass my parking brake. I just want to say thank you!!!!
I must have watched 20 tutorials just trying to see what's what, then I come across yours and that's what's what! Thanks for the easy to understand and helpful tips.
As someone who does not understand electrical very well, and is new to automotive, this helped me greatly! I'll be looking into directly wiring my dashcam now!
I can not add much to what everyone else is saying, so please keep Your style of helpful tutorials coming. Amazing difference from some who post just to try to use vocabulary that others may not understand thus making them look smart but that is simply not the case. Thank you
Thanks for this video mate. Had enough of my footwell lights taking my cigarette lighter socket up. Will come in handy for my dash cam too. Much obliged my man.
Have you installed it in this fashion yet? I'm planning on doing this from the get go. I only have one cigarette lighter and wouldn't sacrifice it for footwell lights. I'm a bit confused about the grounding and not just crimping both the live and ground.
@@rohanndutoit4544 I most certainly did do it! I bought the fuse tapping/piggyback socket with the live cable (mine were micro fuses). My footwell lights power cable is just a single cigarette socket plug, I bought a unit on ebay which has two ends (one positive and one neutral) and a cigarette socket on the other end. I just ran the live into the live wire on the socket, plugged it in, then I found a ground point under the trim next to the drivers seat, so took that up, connected it, tested it, then ran and hid all of the cabling. Took under an hour and went perfectly!
@@sdaafasfad Thank you so much. I saw last night I'll have to do the same. I tried running the lights directly into the fuse box to no avail. I'll just wire another discreet cigarette plug. Thanks for the response!
Wow. This is short and sweet and right to the point. Wish I found something like this 5 years ago when setting up a subwoofer, but with a stock radio using a fuse tap for switched power. Hours and hours of research (always had aftermarket head units with a remote wire with previous vehicles). I wanted to keep a somewhat stock look for the dash. Did it just like you recommended in the end. Edit: Wanted to add tapping into an accessory you don't actually have would be the best the way cars are made now. Heated seated if you don't have heated seats, in my case power sliding doors, sunroof, etc if you have a lower trim model. Check there is the power required "switched or always hot" for the needed accessory and don't go over the amperage that circuit was designed for.
So one very important point JP missed on the Fuse Tap option. You need to test the fuse slot itself to find where the power is coming in on ( call it + and -). You need to have the fuse tap tail on the minus (-) side as you want the current to come into the hot (+) side and go across your fuses over to the minus (-) side and to the accessories. Otherwise the current will just bypass the newly added fuse. This won't have any effect on the original fuse, but will bypass the protection for the new accessory to be fused.
I think your comment is leading me to exactly what I need to know. I want to wire in a USB-A socket (not a cigarette lighter style, but a simple socket that is hidden away). All that I have seen have two wires (+/-), and I don't have enough knowledge to know how to insert them into the car fuse box (hence trying to find a UA-cam video). I believe your comment has confirmed that the spades of the actual fuse are inserted into positive and negative of the fuse board. I must admit, the protection of the accessory has lost me ... I thought the fuse just connected the two, making a circuit (and 'blows' to break the circuit). I am also very confused how an accessory with one wire terminates 'into' a piggyback fuse, and it somehow differentiates + and - at the device end ... that blows my mind, excuse the pun. Am I being really stupid to think that I can simply twist the positive and negative wires together and then crimp them into the single wire coming from a piggyback fuse? If someone knows of a video that shows a positive and negative wire being wired into a piggyback 'correctly', I would appreciate a link. Many thanks.
@@Not-just-doing-I.T. Everything in a fuse box is only + (plus).. your - (minus) comes from your car, for example connecting your black wire at a bolt thas a connection with the frame of your car and the other side you connect to your - of the device .. Back to the plus of the fuse box. To connect a fuse tap u need to tap it a the proper side, the side where the 12v is coming in from your fusebox, that is the side u connect to the left side (not the side were the cable is attach) of the fusetap That it.. keep in mind, your second fuse, the fuse for your device, must be equal of lower then your original fuse.. also that wire can handle 12 amp max.. running both sides can overload the the wire inside your fuse box..
@@garciadany6759 get a multimeter, probe both of the pins of the 2 fuses, the side where u get a short on the fusetap,, thats the proper side for the 12v on the fusbox. But the properside for the 12v of these fusetaps, is the side where the cable is not attached..
Great video. I'm here to make a fused jumper with 4mm male banana jacks for automotive diagnostics. Fabricating leads...that's what up. I use the fuse tap with an amp buddy/amp clamp to scope both the voltage and current of a circuit (at the fuse box). Also, you can buy a 12v adapter with bat +/- leads on it for an easy bat ground and power in the cabin.
Dude I just watched, you seem exceptional in that area , maybe others tho too, idk. But not something I usually don’t subscribe to but, I did. I think I can learn a thing or two from you, I’m thinking specifically auto electric, and when I saw what brand tools you use, I figured you’re the real deal. Thanks
Great video! This is just what I needed to tap my fuse box for my aftermarket radio to dim when lights are turned on. 2012 Honda Civic's ILL wire goes nowhere on wire harness. 👍
That works as long as you are not pulling over 20 amps from the total tie-in point. Another way to do this is to come straight off the battery with with a small new fuse box that you can run all your accessories off of and make it a switch to power source with a relay. That would be the safest way to do it without tapping into anything and having to worry about overloading the circuit
thats why u choose the cigarette en dont use the original fuse.. one 20 amp on the fuse tap at the device side.. also some cigarette are rated for 30 amp.. but the problem is u can't use that wire from the fuse tap its only around 12 amps.. so your device must not demand more then 10 amp.. or u can change that wire completly or run a second fuse tap from your fuse box and distribute the power.. I say this, bc not everyone can run a cable to their firewall
@@jptheinstallguy Hello I have a 2002 Dodge Dakota SLT Quad Cab 4WD with the 5.9L V8. When I purchased the truck the stereo was n it but not hooked up as I pulled the stereo out the wires was cut and pigtail for the stereo was missing. I've looked everywhere for a wire guide can't find it anywhere. The ones (wires) that did aren't in my truck. So can u please send me the correct wire diagram for my truck . It does have 2 pink wires one violet n brown wire have no clue what it does either it has a yellow , red orange blue , black, (purple and purple black, green and green black, grey and grey black, white and white black ) theses last 8 I figure are my speakers the black is ground, red accessory, blue radio antenna/amp, and orange for dimmer light.. but I've hooked my amp up and it's not working like I said there are 2 pink wires I have no clue where they go and then that violet brown striped wire again no clue can u please send me a sketch of how to wire my stereo up and my amp to this vehicles mess
Great video. Question: Should you not check in the fuse box (after removing the fuse you will tap into) which leg has the 12V so that you connect the Add-A-Tap correctly? Thanks
JP~ You are Just in Time and Right on time with another KO on the technical explanation as I'm doing a hard wire of an accessory that came with cigarette lighter plug in, that would have looked downright stupid . You came through like a boss. Here are two more acronyms that have found their way into my life. This one my girl put a quick halt to my depending on her. "I said, baby how did you connect that???"She said, " RTFM it" I said,, "say what... What is that ???" She replied, ' Read The Fucking Manual!!!" (But it helps to see it and hear too.) This one to me holds the most honor and respect. It is for those that have worked hard to achieve and make extraordinary examples of having heart , intelligence and soul. Some would say King, Chief, Captain, but I'm from the Bay Area where we say, "That's the HNIC~ That means your the Boss, King of the Jungle or AKA... The Head N.....in Charge!!! Regardless of color, if if your the Mac then You The HNIC & SIKWITIT!!! (Meant from my heart, in no discriminatory or racial way intended, but only to acknowledge that you are awesome and that I'm very appreciative and look up to you for sharing your knowledge, skills and masterful explanations, that are useful and inspiring. Bless You!!!) Most Respectfully, Randy Chavez
already my brotha. i get asked all the time do i want to have a shop and that use to be my dream and may God has that for me later but honestly man i love teaching and I find fun in doing this for you guys. 💯💯
Great video man! Great trick at 9:00, I’m gonna do that today, cuz ya, makes so much sense in that application. New subscriber, looking fwd to watching more videos. Love the positive energy. You are appreciated.
Great video... but I got confused because you refer to the top/bottom in reverse.. bottom is closest to the tabs and the top is furthest from the tabs, ***VERY IMPORTANT*** The wired double fuse tap is directional , the non-wired side is the IN(for the hot side of the fuse block) and the wired side is the OUT(for the cold side of the fuse block} other than that great info... love the DIY fuse block !
awesome me and my stepdad are going to install my new double din radio in my mustang and one of the things he told me to do is to run a fuse holder on the yellow 12v constant he told me its not required to run it like this but he said its best to run it stright to the battery with a small 30A fuse for safety if anything,
Very informative, thanks. What is that little copper wire type tap you use called? I searched for fuse tap and all I come up with is the plug in type tap.
Good day. Awesome content. Really thorough. First time installing new radio (single din) into car replacing a double din. So I simply use a fuse tap and piggy back onto another fuse of greater value than my new radio requires? Thanks.
You forgot to mention that there is safe side of fuse to tap into because if you install it in the wrong derection if your fuse blows out you will likely burn your circuit you just installed.
Thank you for posting this very helpful video. What would I use for the old style fuses? I have a 62 thunderbird and want to install a modern stereo, that gets turned on with the ignition.
Hello sir I want to install grill led lights to my truck. Would the Power outlet or cigarette lighter be good to put a add a fuse. I want the lights to be on when the truck is on. Im trying to avoid ignition fuse and fuel pump fuse.
Great vid very good explanation. I was getting ready to wire a small vacuum box to one of my fuses and it uses a cigarette lighter adapter. I was going to cut off the cigarette ligther and connect the positive to a fuse using the adapter you showed. I was wondering if a negative is required wire is also required to be ran when doing this?
Both fuses can draw their independent load.. but u have to connect that fusetap properly , on the feeding 12v side of the fusebox and the outer left leg of the fuse tap. The fuse on your device side must be lower then the oem fuse.. bc otherwise u have the risk of overloading your internal fusebox wire and damage it. that wire inside of your fusebox for that particular fuse has the same rating as the original fuse.. adding an extra device of let say 10amps and u are also drawing the max current of the original fuse it can overload quick.
Always…always, read the manual of the accessory you are installing before you actually install. For example I recently purchased a Dashcam that has a “Parking Monitor” function. For that to work it actually has two taps, one to an accessory like the PWR Outlet that only has voltage when key is on and a second tap that has constant power. When properly powered normal Dashcam operation when vehicle is on but powers off a few seconds after the key is turned off. If the “G Sensor” detects a disturbance, with the key off the Dashcam will begin recording. The hardwire kit also has a low voltage detection so if your battery voltage drops below 12VDC it will disable this function to keep the Dashcam from draining your battery below a threshold that should still be sufficient to start the vehicle. To find the constant power simply use your multimeter and measure the voltage on the fuse with the key off.
Thanks for the tutorial yo👏🏼👏🏼 appreciate it. Now i can use this new skill that you help me unlock and tap my fuses to power up accessories in the ride. Thanks a bunch 🙏🏼
Thank you for all of the videos I‘ve been fortunate to watch. They have all been so informative. Thank you. I have a Dmx4707s and I’m trying to mirror my iphone and can’t get it to work. Any suggestions??? I plugged into the AV in with the composit and hdmi but I’m getting no signal.
thanks for watching man as far as the mirror some radios are different some all you have to do is hook the cord up some you need to download a casting app for it to work through usb or wifi just have to read the manual and see which one kenwood prefers.
Hi. Thanks for the explanation. Just a quick question. So I can splice drl fog lights onto an add a fuse and add another accessory to that add a fuse as long as the second fuse totals up to both accessories voltage?
With so many muddle-headed 'tutorials' out there - it's great to find such clear-headed, no-BS guidance.
Subscribed !
Wow, you’ve basically covered all the fuse tap points and alternatives, very impressed. I also like the camera angles. I looked at several videos, but your camera angles and basically all of your explanations for different methods are all appreciated, thank you!
Thank you
Because of you I was able to tap into my fuse box using a new fuse holder. Because of you I was able to bypass my parking brake. I just want to say thank you!!!!
I'm proud of you 👏🏾 good job on your installs 🤜🏾🤛🏾💯💯
Been a minute but what fuse did you tap into to bypass the parking brake?
I must have watched 20 tutorials just trying to see what's what, then I come across yours and that's what's what! Thanks for the easy to understand and helpful tips.
dude this helped me so much, I kept popping a fuse and didn't fully understand how they worked, now I know how to solve my problem thank you!
As someone who does not understand electrical very well, and is new to automotive, this helped me greatly! I'll be looking into directly wiring my dashcam now!
I can not add much to what everyone else is saying, so please keep Your style of helpful tutorials coming. Amazing difference from some who post just to try to use vocabulary that others may not understand thus making them look smart but that is simply not the case.
Thank you
@@billkeogh1591 🙏🏾🙏🏾
Thanks for this video mate. Had enough of my footwell lights taking my cigarette lighter socket up. Will come in handy for my dash cam too. Much obliged my man.
no problem bro. i have another vid that might help you if you want to wire up more accessories ua-cam.com/video/xHkaygTH-uo/v-deo.html
Have you installed it in this fashion yet? I'm planning on doing this from the get go. I only have one cigarette lighter and wouldn't sacrifice it for footwell lights. I'm a bit confused about the grounding and not just crimping both the live and ground.
@@rohanndutoit4544 I most certainly did do it! I bought the fuse tapping/piggyback socket with the live cable (mine were micro fuses). My footwell lights power cable is just a single cigarette socket plug, I bought a unit on ebay which has two ends (one positive and one neutral) and a cigarette socket on the other end. I just ran the live into the live wire on the socket, plugged it in, then I found a ground point under the trim next to the drivers seat, so took that up, connected it, tested it, then ran and hid all of the cabling. Took under an hour and went perfectly!
@@sdaafasfad Thank you so much. I saw last night I'll have to do the same. I tried running the lights directly into the fuse box to no avail. I'll just wire another discreet cigarette plug. Thanks for the response!
Wow. This is short and sweet and right to the point. Wish I found something like this 5 years ago when setting up a subwoofer, but with a stock radio using a fuse tap for switched power. Hours and hours of research (always had aftermarket head units with a remote wire with previous vehicles). I wanted to keep a somewhat stock look for the dash.
Did it just like you recommended in the end.
Edit: Wanted to add tapping into an accessory you don't actually have would be the best the way cars are made now. Heated seated if you don't have heated seats, in my case power sliding doors, sunroof, etc if you have a lower trim model. Check there is the power required "switched or always hot" for the needed accessory and don't go over the amperage that circuit was designed for.
Love how your video is straight to the point. Question answered in the first 2 min. Thank you sir 👍🏼
Clear and straight to the point, thank you sir.
So one very important point JP missed on the Fuse Tap option. You need to test the fuse slot itself to find where the power is coming in on ( call it + and -). You need to have the fuse tap tail on the minus (-) side as you want the current to come into the hot (+) side and go across your fuses over to the minus (-) side and to the accessories. Otherwise the current will just bypass the newly added fuse. This won't have any effect on the original fuse, but will bypass the protection for the new accessory to be fused.
I think your comment is leading me to exactly what I need to know. I want to wire in a USB-A socket (not a cigarette lighter style, but a simple socket that is hidden away). All that I have seen have two wires (+/-), and I don't have enough knowledge to know how to insert them into the car fuse box (hence trying to find a UA-cam video). I believe your comment has confirmed that the spades of the actual fuse are inserted into positive and negative of the fuse board. I must admit, the protection of the accessory has lost me ... I thought the fuse just connected the two, making a circuit (and 'blows' to break the circuit). I am also very confused how an accessory with one wire terminates 'into' a piggyback fuse, and it somehow differentiates + and - at the device end ... that blows my mind, excuse the pun. Am I being really stupid to think that I can simply twist the positive and negative wires together and then crimp them into the single wire coming from a piggyback fuse?
If someone knows of a video that shows a positive and negative wire being wired into a piggyback 'correctly', I would appreciate a link. Many thanks.
@Not-just-doing-I.T. plz tell me u got some help or some1 else to do it plz lol
@@Not-just-doing-I.T. Everything in a fuse box is only + (plus).. your - (minus) comes from your car, for example connecting your black wire at a bolt thas a connection with the frame of your car and the other side you connect to your - of the device ..
Back to the plus of the fuse box. To connect a fuse tap u need to tap it a the proper side, the side where the 12v is coming in from your fusebox, that is the side u connect to the left side (not the side were the cable is attach) of the fusetap
That it.. keep in mind, your second fuse, the fuse for your device, must be equal of lower then your original fuse.. also that wire can handle 12 amp max.. running both sides can overload the the wire inside your fuse box..
I’ve been looking for answers on where to tap, if I understood I’ll tap on draw and not on load, that way my tapping depends on the fuse
@@garciadany6759 get a multimeter, probe both of the pins of the 2 fuses, the side where u get a short on the fusetap,, thats the proper side for the 12v on the fusbox. But the properside for the 12v of these fusetaps, is the side where the cable is not attached..
Great video. I'm here to make a fused jumper with 4mm male banana jacks for automotive diagnostics. Fabricating leads...that's what up. I use the fuse tap with an amp buddy/amp clamp to scope both the voltage and current of a circuit (at the fuse box). Also, you can buy a 12v adapter with bat +/- leads on it for an easy bat ground and power in the cabin.
Thanks for taking the time to create the video. Very informative and well laid out. Nice job!
Dude I just watched, you seem exceptional in that area , maybe others tho too, idk. But not something I usually don’t subscribe to but, I did. I think I can learn a thing or two from you, I’m thinking specifically auto electric, and when I saw what brand tools you use, I figured you’re the real deal. Thanks
Dude thank you… trying to fuse tap my emblem light and your video saved me atleast two hours hahah ****subscribed ***
Great video! This is just what I needed to tap my fuse box for my aftermarket radio to dim when lights are turned on. 2012 Honda Civic's ILL wire goes nowhere on wire harness. 👍
Good work, great info 👍 I think WASH, refers to the washer fluid pump.👌
Straight to the point, at every point. Thanks
anytime glad i can help
Great job. Clear and well thought out instructions.
Just what I needed.
A+
That works as long as you are not pulling over 20 amps from the total tie-in point. Another way to do this is to come straight off the battery with with a small new fuse box that you can run all your accessories off of and make it a switch to power source with a relay. That would be the safest way to do it without tapping into anything and having to worry about overloading the circuit
thats why u choose the cigarette en dont use the original fuse.. one 20 amp on the fuse tap at the device side.. also some cigarette are rated for 30 amp.. but the problem is u can't use that wire from the fuse tap its only around 12 amps.. so your device must not demand more then 10 amp.. or u can change that wire completly or run a second fuse tap from your fuse box and distribute the power.. I say this, bc not everyone can run a cable to their firewall
Great video! So, the only drawback is that with that added fuse tap I guess you can't put that fuse cover back on any more.
This is exactly the information i was looking for given in exactly the way i needed it! Thank you so much you're amazing!!!!!!
Awesome details verbally AND visually! Thank you!...after watching 10+ other videos from others
I'm glad the video helped, thanks for watching?
@@jptheinstallguy Hello I have a 2002 Dodge Dakota SLT Quad Cab 4WD with the 5.9L V8. When I purchased the truck the stereo was n it but not hooked up as I pulled the stereo out the wires was cut and pigtail for the stereo was missing. I've looked everywhere for a wire guide can't find it anywhere. The ones (wires) that did aren't in my truck.
So can u please send me the correct wire diagram for my truck . It does have 2 pink wires one violet n brown wire have no clue what it does either it has a yellow , red orange blue , black, (purple and purple black, green and green black, grey and grey black, white and white black ) theses last 8 I figure are my speakers the black is ground, red accessory, blue radio antenna/amp, and orange for dimmer light.. but I've hooked my amp up and it's not working like I said there are 2 pink wires I have no clue where they go and then that violet brown striped wire again no clue can u please send me a sketch of how to wire my stereo up and my amp to this vehicles mess
Agreed with the guy below. Clear reasonable guidance, quick and to the point. Well done! Subscribed.
Great video. Question: Should you not check in the fuse box (after removing the fuse you will tap into) which leg has the 12V so that you connect the Add-A-Tap correctly? Thanks
Good video but yea you should have also explained which leg of the fuse tap has the continuity to match which side has 12v
ABSOLUTELY CORRECT AND AN ESSENTIAL THING TO HIGHLIGHT AND GET RIGHT AS CAN LEAD TO BIG PROBLEM IN TIME IF INSERTED INCORRECTLY😊
JP~ You are Just in Time and Right on time with another KO on the technical explanation as I'm doing a hard wire of an accessory that came with cigarette lighter plug in, that would have looked downright stupid . You came through like a boss.
Here are two more acronyms that have found their way into my life. This one my girl put a quick halt to my depending on her. "I said, baby how did you connect that???"She said,
" RTFM it" I said,, "say what... What is that ???" She replied, ' Read The Fucking Manual!!!"
(But it helps to see it and hear too.)
This one to me holds the most honor and respect. It is for those that have worked hard to achieve and make extraordinary examples of having heart , intelligence and soul. Some would say King, Chief, Captain, but I'm from the Bay Area where we say, "That's the HNIC~ That means your the Boss, King of the Jungle or AKA... The Head N.....in Charge!!! Regardless of color, if if your the Mac then You The HNIC & SIKWITIT!!! (Meant from my heart, in no discriminatory or racial way intended, but only to acknowledge that you are awesome and that I'm very appreciative and look up to you for sharing your knowledge, skills and masterful explanations, that are useful and inspiring. Bless You!!!)
Most Respectfully,
Randy Chavez
already my brotha. i get asked all the time do i want to have a shop and that use to be my dream and may God has that for me later but honestly man i love teaching and I find fun in doing this for you guys. 💯💯
Haha RTFM is an old school hacker term bro, you got a cool gf is she knows that one. Santa clara county wassup
Very clear. Thank you.
Great video; very clear and easy to understand, thanks!
thanks! Helping me and my son get by some new lights in his truck much appreciated.
Great video man! Great trick at 9:00, I’m gonna do that today, cuz ya, makes so much sense in that application. New subscriber, looking fwd to watching more videos. Love the positive energy. You are appreciated.
10:52 It does matter which way this adapter goes so I wish you had mentioned that in the video.
Great video... but I got confused because you refer to the top/bottom in reverse.. bottom is closest to the tabs and the top is furthest from the tabs, ***VERY IMPORTANT*** The wired double fuse tap is directional , the non-wired side is the IN(for the hot side of the fuse block) and the wired side is the OUT(for the cold side of the fuse block} other than that great info... love the DIY fuse block !
Getting the tap installed backwards would explain how he was able to blow both fuses. If installed correctly, that would be impossible.
a simple diagram would be worth a thousand words
awesome me and my stepdad are going to install my new double din radio in my mustang and one of the things he told me to do is to run a fuse holder on the yellow 12v constant he told me its not required to run it like this but he said its best to run it stright to the battery with a small 30A fuse for safety if anything,
Thank you you helped me get my subs going on the parking brake bypass very helpful
Now thus is knowledge 🎉🎉🎉🎉
Good job on the homemade fuse link, thanks big help.
definitely got some value. Good vid bro
Appreciate it
I'm an aviation electrician, I thought I had basic electronics on lock. Well, I certainly learned something new today.
this scares me!!
Thanks for sharing mate! Very accurate, useful and sensible knowledge.
Nice vid. I installed 3 of those in my truck.
New sub.
Bro your video is so awesome and the way you explain I can't ask for nothing better keep it up bro
How did you deal with the fuse box cover and the extra height of the fuse tap?
Love the video man, learned alot
Very informative, thanks. What is that little copper wire type tap you use called? I searched for fuse tap and all I come up with is the plug in type tap.
Thanks for the video. Lot's of great info. I like the fuse taps! Just purchased a variety pack.
Underrated channel! Thanks man!!! Subbbed
Thanks a lot 🙏🏾
You are the Professor!
Thanks JP you saved me a headache.
So glad I can help
This video really helped, thanks! I worked at Radio Shack back in the day, but there style taps confused me.
Glad it helped!
excellent video .. keep it moving , just what I need2know!!
Great Freak’n video sir! Worthy of subscribing, God Bess
Good day. Awesome content. Really thorough. First time installing new radio (single din) into car replacing a double din. So I simply use a fuse tap and piggy back onto another fuse of greater value than my new radio requires? Thanks.
Bro you are amazing, thank you for you experience !! help me a lot !
GREAT VIDEO Crystal Clear Information MANY THANKS. ,,,Budgie from UK,,🇬🇧
very informative sir! hats off to you and hope to learn more stuff from your other videos.
You are bad ass and forever grateful for your shared expertise.
Great video, thoroughly explained exactly what I was looking for, thank-you!
Great vid. Suggestions on wiring the ground?
Fantastic!!
Great video, very to the point and clear.
Thank you
I so enjoy the way you talk bruh
You forgot to mention that there is safe side of fuse to tap into because if you install it in the wrong derection if your fuse blows out you will likely burn your circuit you just installed.
In other word, the load side
How to find the load side
?
Good point, the voltage travel would not be going through both fuses leaving that circuit unprotected. 💥💥😵
Way too important
Maybe a stupid question, but where do i connect the ground wire to?
Great Great video thank sir. 🤘🏻
So many good tips. Thanks dude
Thank you for posting this very helpful video. What would I use for the old style fuses? I have a 62 thunderbird and want to install a modern stereo, that gets turned on with the ignition.
All your videos are great sir, well done! An instructional series to the layperson.
0:35 This is hilarious. Literally here because I bought the $12 wiring harness instead of the $100 one for my corvette lol
😂😂 almost like I made it just for you
Great content. Thanks
You're a good dude. Keep up the great work!
Thank you for sharing your knowledge JP. Great helpful vid. It definitely simplified my install today.
Outstanding video!
Hello sir I want to install grill led lights to my truck. Would the Power outlet or cigarette lighter be good to put a add a fuse. I want the lights to be on when the truck is on. Im trying to avoid ignition fuse and fuel pump fuse.
Great video, very informative. I wanted to ask, with extensions like these, sometimes you can no longer close the fusebox. Is this ok?
Great vid very good explanation. I was getting ready to wire a small vacuum box to one of my fuses and it uses a cigarette lighter adapter. I was going to cut off the cigarette ligther and connect the positive to a fuse using the adapter you showed. I was wondering if a negative is required wire is also required to be ran when doing this?
What if you had put a 15 amp fuse there rather than a 7.5 amp fuse would that have been any different since it's under 20amps?
Both fuses can draw their independent load.. but u have to connect that fusetap properly , on the feeding 12v side of the fusebox and the outer left leg of the fuse tap. The fuse on your device side must be lower then the oem fuse.. bc otherwise u have the risk of overloading your internal fusebox wire and damage it. that wire inside of your fusebox for that particular fuse has the same rating as the original fuse.. adding an extra device of let say 10amps and u are also drawing the max current of the original fuse it can overload quick.
Always…always, read the manual of the accessory you are installing before you actually install. For example I recently purchased a Dashcam that has a “Parking Monitor” function. For that to work it actually has two taps, one to an accessory like the PWR Outlet that only has voltage when key is on and a second tap that has constant power. When properly powered normal Dashcam operation when vehicle is on but powers off a few seconds after the key is turned off. If the “G Sensor” detects a disturbance, with the key off the Dashcam will begin recording. The hardwire kit also has a low voltage detection so if your battery voltage drops below 12VDC it will disable this function to keep the Dashcam from draining your battery below a threshold that should still be sufficient to start the vehicle. To find the constant power simply use your multimeter and measure the voltage on the fuse with the key off.
This is a very good video.
Excellent video bro!
Thanks for the tutorial yo👏🏼👏🏼 appreciate it. Now i can use this new skill that you help me unlock and tap my fuses to power up accessories in the ride. Thanks a bunch 🙏🏼
Freaking Great video! So much good info in this video!
Good stuff man. I hope to add leds, a dash camera, and a security system with this info. Thanks so much!
Thank you sir
excellent reference guide... 4:29 fixed an issue (caused by me lol).
Thanks big homie this video explains it really good now I have the courage to install my jl sub in my Tacoma 👍👍
yessssuh glad i can help out. you got this‼💯
Good video helped alot
You do have to confirm which side of the fuse socket is the power side. That makes a difference with the tap orientation.
True, you have to check both sides without the fuse attached to see which side is feeding the 12v.
How do you go about determining this?
@@Ghost_Os with a voltmeter.
very nice - thank you
Thank you brother!
Thank you for this info. 👍👍
THANK YOU FOR THIS VIDEO, YOU HELP ME A LOT , WHIT THIS. NOW I KNOW HOW TO DO A NICE AND CLEAN JOB , JUST THE RIGHT INFO A NEED . THANK YOU 👍👍👍
Love comments like this, glad I was able to help💯
Excellent video.. Very informative.. Thanks 🤝
Fantastic info. Thanks
fantastic thx mate !!!!
Great easy to follow thanks!
Thank you for all of the videos I‘ve been fortunate to watch. They have all been so informative. Thank you.
I have a Dmx4707s and I’m trying to mirror my iphone and can’t get it to work. Any suggestions??? I plugged into the AV in with the composit and hdmi but I’m getting no signal.
thanks for watching man as far as the mirror some radios are different some all you have to do is hook the cord up some you need to download a casting app for it to work through usb or wifi just have to read the manual and see which one kenwood prefers.
you are a beast with your craft/ trade thank you so much!!! you explained it very well and understandable.
Glad I could help💯
Thanks Jp that was very helpful
Hi. Thanks for the explanation. Just a quick question. So I can splice drl fog lights onto an add a fuse and add another accessory to that add a fuse as long as the second fuse totals up to both accessories voltage?