Great, really glad it helped u :). Would also just like to take the opportunity to say to everyone who might be reading this; that If this video helped u, I would be very grateful if you could support the channel by making a small donation - paypal.me/iofix?locale.x=en_GB - this will enable me to spend more time making more videos which will hopefully once again be helpful to you. Thanks :)
Cheers for the fix. Just did my switch in 20 minutes. Only the drivers window switch had failed, so put up with it for about eight weeks. Now good as gold.
Did both windows in my vectra C, and it worked like a dream👍🏻. Great video. Clear direction. Saved me a nice few quid. I'd like if you made more vectra videos. Thanks a million mate🙏🏻.
Great, glad it helped, thanks for the message, I would also be grateful if you could support the channel by subscribing - free! - just click the button! :)
Didn't want to comment or like untill i tried it out. Because it was rainin here my windows were down and i had to black bag them untill i tried your advice with the cleaning the buttons, so i tried this and it worked and i am so happy glad my windows are now closed. Just wanted to say a BIG THANKYOU FOR THE VIDEO. And anyone else who hasn't tried it and may have the same problem id definitely recommend
Thank you for this excellent video. Good quality and shows all of the process very well. Helped me fix my windows and mirrors today. I also cleaned the rubber gasket and the contacts on it, as well as the entire circuit board on both sides as it was very dirty. I would only recommend using electrical contact cleaner just as you have done. Great job. Thanks again!
Was Getting so fed up looking for a video that linked to an Astra h where the window (drivers side) opens as normal but wouldn't close at all. I looked at the vids that changed switches, tested the switches with either paper clips or wire and thought bloody hell! Anyway, so glad I came across your video, slightly different controller but with a little bit of head scratching eventually managed to get into the inner workings. Had some pure alcohol used for defrosting frozen windows etc and cleaned the contacts hoping that that will cure the problem, reassembled controller, fitted it back in door and pressed UP, The weight of the world instantly lifted from my shoulders as the window started to raise up into the closed position. open, close, open , close. Works a treat now and saved a few Bob as well. Thank you so much
I done exactly what you said there this evening and now all my windows and control panels are back working, and even my mirrors for the first time since I've bought the car. Thanks very much for this sound advice.
Just done both sides in less than 10 mins. Used 80% alcohol based hand sanitiser of all things, made sure no residue left and perfect on first attempt. Thanks for sharing this simple repair. Saved me a trip to the scrappers.
Having fixed the non-functional cruise control stalk in my Vectra by similar cleaning last year, I'd noticed my window switch going the same way. Found this video quickly, which meant I was ahead of the game for easy removal and disassembly. Problem solved in minutes! One point - the switching operation relies on the conductive pads on the rubber part making the connection on the traces on the circuit board, so it definitely makes sense to clean both. A great opportunity to clean all the finger grime off the switch surface, too - much easier when out of the car. Lovely quick fix - thanks for doing this!
In my car, some buttons were not working correctly. I needed to press them really hard for them to work. Now they are working perfectly! Thanks, man! I removed the buttons with a plastic trim removal tool and it worked out great. No damage to the buttons or trim whatsoever.
FANTASTIC VIDEO !!!! absolutely spot on for what i need, I have been quoted nearly £300 to do what you have shown how to do, This is crazy easy as long as i take my time and do not rush it and be very careful to take the whole unit apart. Thank you sooo much for your fantastic easy to follow video, I will be having a go at this tomorrow, and i will have your video handy to take me though it, YOU ARE THE BEST THANK YOU X
I followed your instructions on the video and cleaned my switch, it only took about 10 minutes to complete. The hardest thing was actually getting the unit back in the door as it took a little more force than I thought but all is back and working. Thanks very much for making this video it was a tremendous help.
Excellent video - very clear instructions - I have one very proud son who followed your advice to the letter and we now have a switch working that has never worked since we too purchased the vehicle.
Followed your example and it worked a treat. My drivers door I was begining to push hard - now thats sorted. Passenger door the down was not working, but using the same principles, both windows operates perfectly!
Wow, i can't believe it helped! Visualy there was nothing wrong, but it wasnt working at all, after this cleaning all the buttons fully working! Many thanks!!!! :)
Thank you for this video, saved me a whole lot of money. Great reference, even ruined a good flat head screwdriver for the task by knocking it over 😊. Did the trick and saved me loads. Top Man for sharing. Followed the video, brought the Electrical Contact Cleaner from Halfords (£4). Job done , followed the same process with all the other door switches. Basically the same way remove the console from the door . Remove the electrics, no clip this time just a bit of pulling. Single switches passenger/ rear just open them up via the 2 clips either side. Clean as before and replace. Job done £4 .!!!!
Thank you so much, couldn't believe the fix was so simple and straight forward. I've got my wing mirrors back after three years of prodding and poking them.
Worked perfectly for me. I was having to push the electric window switches really hard to get them to work. No problems at all now. Everything works like new!
Omg thank a million i've tried soo many videos to fix the windows and people said it was because the battery had been changed and how to reset. This worked brilliant. It fixed my central locking which has been broken for 5 years and i was only trying to fix the windows 😀!!
That's great to hear. Thanks for the comment, would also be great if you can support the channel by subscribing etc if you haven't already done so... :)
Thank you for your help. It took only fifteen minutes to clean my Astra H front power window and mirror control units contact problems. EDIT. I was looking help for an onother problem with my Astra and ended here, so watched this again just for fun, thanks!😂
Great! It had been playing up more and more of late. Your video clip + 10 minutes and it’s as good, if not better than new👍 Thank you very much for your time and effort.
Great video and narrative. So easy to follow your instructions. So great tips on ,,'if you don't have an electric contact cleaner '. I used an aerosol brake cleaner on mine. Worked wonders .
Thanks for this. I had removed and opened the box on my Opel Tigra but having removed the rubbery thing the contacts looked impeccable -- like if I were to wipe (impregnated) buds on them, I'd be dirtying them. So I just put it back together and tried another fix I'd read up -- disconnecting the battery. No joy. I come in and continue the search. You explicitly talk about those apparently clean contacts. Brilliant! So I try that. Boo-hoo. No joy. The only switches that work are the door lock and ..boot. The roof switch makes an alarm, but the windows and mirror controls, nada. Advice most welcome!
Thank you for this! I got a 2nd hand unit in the breakers and it worked. But I cleaned the one I took out lastnight with nail polish remover and all electrics now work, back and front and mirrors👍
Thanks for sharing, was struggling with my widows, i used WD-40 instead of the contact cleaner and the result were amazing and would suggest WD-40 as an alternative.
Hi. Thank you so much. I have a Vectra. My windows on the drivers side would only go up/down with excessive force. Followed this step by step and they're as good as new. The cleaner cost me £4 from Halfords.
Great fix on the front drivers switch unit. Although doing the same on both rear switches, both still having no effect on window function. Any other tips or ideas?
Great video and easy to follow instructions. Any ideas on fixes for interior courtesy lights? Glove box light working but none of the reading lights front or back...fuses looks fine... any ideas greatly appreciated!! Thanks for the video!
Afraid I don't have any specific ideas on that, I would check the bulbs and the connections at the light units, otherwise I guess it might be related to the body control module - think that's what controls the delayed switch off etc... Good luck
Thanks for the vid, passenger side dint work and drivers side /window wouldnt go down! contacts didnt even look dirty or the cotton bud i used! Much appreciated! I used isopropanol!
I am now a happy bunny with my windows working perfectly. A very good video. I made a schoolboy error, forgetting to put the two retaining screws back, having worked on the unit indoors and then putting it back instu I returned and removed the unit and promptly dropped one of the screws. Wal listen to what you are told. :)
Glad it helped. No I'm afraid I don't currently have one for the pass side. (BTW would be great if you could support the channel by subscribing - I'm trying to get to 1000!)
Any tips on how to make the boot look button operate in wet wether? It's fine in the dry but in the winter months the only way of opening the boot is slamming the button really hard with the palm of you hand.
Glad it worked for u on the driverside, sorry don't have the car anymore - I remember the pass side being about the same - but I'm guessing not - otherwise u wouldn't be asking.
Thank you for this really helpful video you saved me £170+vat this is a dealer only replacement part 👍👍👍
Great, really glad it helped u :). Would also just like to take the opportunity to say to everyone who might be reading this; that If this video helped u, I would be very grateful if you could support the channel by making a small donation - paypal.me/iofix?locale.x=en_GB - this will enable me to spend more time making more videos which will hopefully once again be helpful to you. Thanks :)
8ii8
One of the clearest videos I have ever seen for car repairs. Thanks Mr Iofix
Thanks for your kind comment - would be grateful if u could support the channel by subscribing - I'm trying to get to 1000 subscribers! :)
Dude you are a life saver this totally worked so happy 😀
Worked like a charm! Both driver and passenger doors weren't working, followed this guide and they're perfect again. Thanks bud
You're welcome, glad it worked for you, thanks for the comment.
Cheers for the fix. Just did my switch in 20 minutes. Only the drivers window switch had failed, so put up with it for about eight weeks. Now good as gold.
Did both windows in my vectra C, and it worked like a dream👍🏻. Great video. Clear direction. Saved me a nice few quid. I'd like if you made more vectra videos. Thanks a million mate🙏🏻.
Great - glad I help u out.
Only wanted to fix my window, got my mirrors to work for the first in years! Cheers for that!
Great, glad it helped, thanks for the message, I would also be grateful if you could support the channel by subscribing - free! - just click the button! :)
Didn't want to comment or like untill i tried it out. Because it was rainin here my windows were down and i had to black bag them untill i tried your advice with the cleaning the buttons, so i tried this and it worked and i am so happy glad my windows are now closed. Just wanted to say a BIG THANKYOU FOR THE VIDEO. And anyone else who hasn't tried it and may have the same problem id definitely recommend
Great, thanks for the comment and feedback.
Fixed my Vectra with help of this video. Saved parts price 370 euros plus workshop work costs. Thank you !!!
Excellent glad it helped, thanks for messaging.
Wow, wow wow! That worked an absolute treat. Electric windows and mirrors working again. Thanks so much 👍💯
Excellent - glad it helped u!
So thankful to you for this, I was contemplating, buying new but 10 mins performing the cleaning solved the problem
Great, glad it worked for you - thanks for the comment.
Thank you for this excellent video. Good quality and shows all of the process very well. Helped me fix my windows and mirrors today. I also cleaned the rubber gasket and the contacts on it, as well as the entire circuit board on both sides as it was very dirty. I would only recommend using electrical contact cleaner just as you have done. Great job. Thanks again!
Great, thanks for the feedback, gad it helped.
Was Getting so fed up looking for a video that linked to an Astra h where the window (drivers side) opens as normal but wouldn't close at all. I looked at the vids that changed switches, tested the switches with either paper clips or wire and thought bloody hell! Anyway, so glad I came across your video, slightly different controller but with a little bit of head scratching eventually managed to get into the inner workings. Had some pure alcohol used for defrosting frozen windows etc and cleaned the contacts hoping that that will cure the problem, reassembled controller, fitted it back in door and pressed UP, The weight of the world instantly lifted from my shoulders as the window started to raise up into the closed position. open, close, open , close. Works a treat now and saved a few Bob as well. Thank you so much
Great, glad it helped u!
I done exactly what you said there this evening and now all my windows and control panels are back working, and even my mirrors for the first time since I've bought the car. Thanks very much for this sound advice.
Great - glad it helped u - thanks for the comment :).
GREAT VIDEO - Simple & clear solution to a problem I was dreading to fix. Worked a treat!! Thanks a bunch iofix!😁
Glad it helped - thanks for the comment and sorry for the late reply.
Just done both sides in less than 10 mins. Used 80% alcohol based hand sanitiser of all things, made sure no residue left and perfect on first attempt. Thanks for sharing this simple repair. Saved me a trip to the scrappers.
Great, glad it helped, and thanks for subscribing! :)
Having fixed the non-functional cruise control stalk in my Vectra by similar cleaning last year, I'd noticed my window switch going the same way. Found this video quickly, which meant I was ahead of the game for easy removal and disassembly. Problem solved in minutes!
One point - the switching operation relies on the conductive pads on the rubber part making the connection on the traces on the circuit board, so it definitely makes sense to clean both. A great opportunity to clean all the finger grime off the switch surface, too - much easier when out of the car.
Lovely quick fix - thanks for doing this!
Great, glad it helped, and thanks for the extra info. (would be grateful if u could support the channel by subscribing)
In my car, some buttons were not working correctly. I needed to press them really hard for them to work. Now they are working perfectly! Thanks, man!
I removed the buttons with a plastic trim removal tool and it worked out great. No damage to the buttons or trim whatsoever.
That's great, glad it helped - BTW I would be grateful if u could support the channel by subscribing - thanks.
i bought a second hand vectra windows buttons very intermittent, this worked a treat and only took 10 mins thanks
Excellent, glad the vid helped. Cheers
You just saved my trusty Vectra of 11 years! Thank you!
I love getting messages like this - excellent - saving old cars makes me happy! :)
FANTASTIC VIDEO !!!! absolutely spot on for what i need, I have been quoted nearly £300 to do what you have shown how to do, This is crazy easy as long as i take my time and do not rush it and be very careful to take the whole unit apart. Thank you sooo much for your fantastic easy to follow video, I will be having a go at this tomorrow, and i will have your video handy to take me though it, YOU ARE THE BEST THANK YOU X
Great, really glad u found the video helpful, thanks for the comment and good luck with the job - I'm sure u will be fine. :)
Oh my, if I had of known it was this easy I would have had working windows for the past 18 months! Tried it and yes, solution worked! THANK YOU!!!
Better late than never! - glad it helped u.
I followed your instructions on the video and cleaned my switch, it only took about 10 minutes to complete. The hardest thing was actually getting the unit back in the door as it took a little more force than I thought but all is back and working.
Thanks very much for making this video it was a tremendous help.
That's great to hear :) - thank you very much for your comment.
Excellent video - very clear instructions - I have one very proud son who followed your advice to the letter and we now have a switch working that has never worked since we too purchased the vehicle.
Excellent, glad it worked for u.
Followed your example and it worked a treat. My drivers door I was begining to push hard - now thats sorted. Passenger door the down was not working, but using the same principles, both windows operates perfectly!
That's great to know, thanks for the feedback.
Just finished doing this on a 2004 Vectra. Worked superbly! Many thanks for posting.
Great, glad it helped.
Wow, i can't believe it helped! Visualy there was nothing wrong, but it wasnt working at all, after this cleaning all the buttons fully working! Many thanks!!!! :)
Excellent! :)
Thank you for this video, saved me a whole lot of money.
Great reference, even ruined a good flat head screwdriver for the task by knocking it over 😊.
Did the trick and saved me loads. Top Man for sharing.
Followed the video, brought the Electrical Contact Cleaner from Halfords (£4).
Job done , followed the same process with all the other door switches.
Basically the same way remove the console from the door .
Remove the electrics, no clip this time just a bit of pulling.
Single switches passenger/ rear just open them up via the 2 clips either side.
Clean as before and replace. Job done £4 .!!!!
Great glad it helped u - thanks for the comment. BTW would be great if u could support my channel subscribing - thanks.
Great video. Almost none of my switches were working and now all work fine. Many thanks
Great! :)
Brilliant thanks..it cured not just my window inaction but my estates boot opening problem was cured
Great - glad it helped.
Thank you so much, couldn't believe the fix was so simple and straight forward. I've got my wing mirrors back after three years of prodding and poking them.
Great, glad it helped. Sorry for the delayed reply.
Thanks, worked a treat on both driver and passenger controls. Used WD 40 to clean, no problems. Again very pleased.
Great, glad it helped u. thanks for feedback on the wd40 option.
Fantastic. Just fixed my front window issues I had no contact cleaner so used non sticky hand sanitizer worked a treat thanks for the video
Great. glad it helped.
Brilliant! Used windowlene as cleaner. Worked a treat. As you say, don’t worry if contacts LOOK clean. Wish I’d known this ages ago. Many thanks.
Great, glad it helped. :)
Fantastic, just fixed two different buttons that stopped working. Excellent video and thanks for sharing the tip.
Great, glad it helped u, thanks for the comment.
Worked perfectly for me. I was having to push the electric window switches really hard to get them to work. No problems at all now. Everything works like new!
Great! - Glad it helped u. Thanks for the comment.
Omg thank a million i've tried soo many videos to fix the windows and people said it was because the battery had been changed and how to reset.
This worked brilliant. It fixed my central locking which has been broken for 5 years and i was only trying to fix the windows 😀!!
Great, glad it helped, thanks for the comment.
JUST DONE AS YOU EXPLAINED AND NOW MY WINDOW WORKING AGAIN,
Great, glad it helped u out.
Just bought this car and it had this issue, thanks a bunch, it works now
Great, glad it helped. - would really appreciate it if u could support the channel by subscribing - thanks.
Thank you for this video, just saved me a load of hassle, brilliant help
That's great to hear. Thanks for the comment, would also be great if you can support the channel by subscribing etc if you haven't already done so... :)
Thank you,just did that job on vectra c switch,works now,so thanks for saving me the expense of new switch ,
Great! - Glad it helped u. Thanks for the comment.
Thank you for your help. It took only fifteen minutes to clean my Astra H front power window and mirror control units contact problems.
EDIT. I was looking help for an onother problem with my Astra and ended here, so watched this again just for fun, thanks!😂
Excellent - glad it helped u.
This was immensely helpful, thank you so much
Great! It had been playing up more and more of late. Your video clip + 10 minutes and it’s as good, if not better than new👍 Thank you very much for your time and effort.
Great, glad it helped, thanks for the comment.
Great video very helpful. Thank you..
I Leavered the switch out at the top and the bottom easily not the sides.
Great video and narrative.
So easy to follow your instructions.
So great tips on ,,'if you don't have an electric contact cleaner '.
I used an aerosol brake cleaner on mine.
Worked wonders .
Merry Christmas
Great glad it helped. Sorry for the late reply. Merry Xmas.
@@iofix Merry Christmas
Done this today results fantastic 👍
Great - thanks for the comment.
Very useful for me. Thanks a lot!
Thanks for this. I had removed and opened the box on my Opel Tigra but having removed the rubbery thing the contacts looked impeccable -- like if I were to wipe (impregnated) buds on them, I'd be dirtying them. So I just put it back together and tried another fix I'd read up -- disconnecting the battery. No joy. I come in and continue the search. You explicitly talk about those apparently clean contacts. Brilliant! So I try that. Boo-hoo. No joy. The only switches that work are the door lock and ..boot. The roof switch makes an alarm, but the windows and mirror controls, nada. Advice most welcome!
I would check fuses if you haven't already, & then wiring going to the switch unit.
Thanks, mate. You've just saved me £100!
Great - glad it helped u out.
Done this tonight and they work like brand new ! Thanks alot for the help 👌
That's great to hear. Thanks for the comment, would also be great if you could support the channel by subscribing if you haven't already done so... :)
thank you for this very helpful video, you just saved me £250, very clear. thank
Glad it helped u - I do my best to try to make videos that will help people.
Thank you for this! I got a 2nd hand unit in the breakers and it worked. But I cleaned the one I took out lastnight with nail polish remover and all electrics now work, back and front and mirrors👍
Great, glad it helped u! :)
That's great. Worked perfectly with WD40. Thanks!
Great - glad it help u out.
Just fixed it myself! Great job, thank you for posting!
Great - glad it helped.
Fantastic I used cleaning wipes on both ends and all inside, fantastic, new one was more than the price of this car.
Great, glad it helped.
Awesome. Did this today and can't believe it worked. Thank you so much 👍. Just subscribed to your channel
Great, glad it worked. Thank you for subscribing.
Thank you for this excellent video I'm off to fix my neighbours Astra he'll be so pleased to save some serious money!
Great, good luck with it. Thanks for the comment.
Thanks for sharing, was struggling with my widows, i used WD-40 instead of the contact cleaner and the result were amazing and would suggest WD-40 as an alternative.
Great, glad it helped.
Cheers mate! Now all switches works perfect 👍 Easy and cheap job .
Glad it helped u - thanks for the comment.
Hi. Thank you so much. I have a Vectra. My windows on the drivers side would only go up/down with excessive force. Followed this step by step and they're as good as new. The cleaner cost me £4 from Halfords.
Great, glad it helped :)
Thank you worked a treat ! nice simple fix.
Great fix on the front drivers switch unit. Although doing the same on both rear switches, both still having no effect on window function. Any other tips or ideas?
Thanks for the video, worked perfectly on my Astra 2011.
Great, glad it helped.
Worked a charm… done the passenger one thats been on the blink since we bought the car 6 years ago too👌🔥👏
Great, glad it helped! :)
Thank you for this video it was very helpful for me. All worked perfect after service!
Great. Thanks for the comment - also would be great if u could support the channel by subscribing. Thanks
Thank you just saved me a trip to the dealership
Great, glad it helped u.
yes it’s start working again thanks for the video
Great, thanks for the comment.
Great video and easy to follow instructions. Any ideas on fixes for interior courtesy lights? Glove box light working but none of the reading lights front or back...fuses looks fine... any ideas greatly appreciated!! Thanks for the video!
Afraid I don't have any specific ideas on that, I would check the bulbs and the connections at the light units, otherwise I guess it might be related to the body control module - think that's what controls the delayed switch off etc... Good luck
Brilliant video worked a treat, however same problem with passenger side having trouble disconnecting it, any tips?
Glad the vid helped u, never done the pass side I'm afraid.
Good stuff..got mine fixed. Cheers fella!
Glad it helped you - thanks for the comment.
Thanks for the vid, passenger side dint work and drivers side /window wouldnt go down! contacts didnt even look dirty or the cotton bud i used! Much appreciated! I used isopropanol!
Great, thanks for the comment and feedback.
Brilliant used this video again today. That we clip is a nightmare
Thanks, glad to help u out.
Thank you for your help!
I am now a happy bunny with my windows working perfectly. A very good video. I made a schoolboy error, forgetting to put the two retaining screws back, having worked on the unit indoors and then putting it back instu I returned and removed the unit and promptly dropped one of the screws. Wal listen to what you are told. :)
Glad it helped :) - BTW would be great if you could support the channel by subscribing - I'm trying to get to 1000!
It works! Thanks mate it works perfectly now. 👍
Excellent! - :) - Would be grateful if you could support the channel by subscribing. Thanks
Thanks for the vid is there any of showing the passenger side
Glad it helped. No I'm afraid I don't currently have one for the pass side. (BTW would be great if you could support the channel by subscribing - I'm trying to get to 1000!)
You sir, are a saint. Quick clean using some meths and she’s working Perfectly. 👌🏻👌🏻👌🏻👌🏻👌🏻👌🏻
Thank you! :) - Glad it worked for you.
Just curious, If i used a light emmiting circuit tester on the switch. Would it flicker?
Thank you, windows fixed
Great glad it helped! :)
Thak you for the video. You are a star!
Great, glad it helped u - thank you for subscribing.
Just done mine worked at treat spot on 👍
Great, glad it worked for you.
Just fixed this. I used an alcohol cleaner which seemed to work fine. Thanks.
Excellent, glad it helped. Thanks for the message.
Beautiful video thank u so my man for taking your time beauty
Thanks - glad it helped :)
Ur top man sir god bless u
"GREAT", it worked for me 👍👍👍👍
Great! :)
Any tips on how to make the boot look button operate in wet wether? It's fine in the dry but in the winter months the only way of opening the boot is slamming the button really hard with the palm of you hand.
No I'm afraid I can't help u at the moment with the boot problem, but I will video and upload the fix if I come across one.
Thanks For this Any Idea how to Get the Passenger side Switch Working?
Glad it helped. Never done the passenger side but I would guess same principal.
@@iofix thanks Have had a Look but cant see any Way to Enter the Circuit board, never mind thanks
Luckily I had bookmarked this video as I've just had to repeat it and required a gentle reminder. 06 Vectra.
Great glad it helped - good thinking with the bookmark!
Thankyou, Awesome video
Thanks! :)
Problem solved, thanks very much.
Great, glad it helped u.
You are a legend !! 😄😄
Thank you !!!
Great, glad you found it useful - thanks for the comment. :)
Thanks is the passenger side cleared in the same way???
@@paulduggan1079 Hi, yes - same principal.
Legend it works thanks
Great, glad it worked for u, thanks for the comment.
Does this work for the powerfolding mirrors? To let them fold in?
Might do.
Thank you .you saved me £35
Great - glad it helped.
Solved my problem had to do both doors. Thanks👍👍
Great - thanks for the comment. :)
thanks. Now it works
Great, glad it helped.
Worked for me ! 😀
Great. :)
Thanks.What about the passenger one, it's impossible to open up.
Hello, I've never done the pass side - so sorry can't help.
Hi Worked a treat on my driver side, but no idea how to remove the switch from the passenger side, do you have any idea?
Glad it worked for u on the driverside, sorry don't have the car anymore - I remember the pass side being about the same - but I'm guessing not - otherwise u wouldn't be asking.
Decent explanitive video ..cheers 👍
Thanks.
Thank you so much.
Glad it helped! :) - BTW would be great if you could support the channel by subscribing - I'm trying to get to 1000!