RME Babyface Pro FS: An In Depth Look - with Live Guitar demo via S-Gear by Scuffham Amps.
Вставка
- Опубліковано 16 жов 2024
- The full Webinar by Synthax USA on the RME Babyface Pro FS and the PREMIUM PLUGIN BUNDLE, including Scuffham Amps S-Gear and Brainworx BX_Opto and BX_Masterdesk
The new 2020 Babyface PRO FS improves all elements: sound quality, MicPres, Instrument inputs, lowest-noise Headphone/IEM outs and ultra-low latency. All parts are industry-leading representatives of its kind - combined in a USB bus-powered mobile interface, working completely even on a legacy USB port!
The Babyface PRO FS not only provides RME´s new SteadyClock FS pro audio clock with FemtoSecond accuracy. The ultra-compact box inherits now the same highest quality analog conversion and headphone preamp technology, like the industry-leading ADI-2 PRO FS. It connects to USB2/USB3 ports and comes with an USB-C cable. It also provides a newly K-Slot for theft protection.
I don’t even have this unit yet but have decided this is the one for me. Thank you sooooo much for putting my mind at ease that I am not only making a good decision, but as a novice to audio engineering I can find answers to virtually anything in your video.
Best RME TotalMix Fx tutorial on UA-cam!
WOW! Thanks so much for saving me hours! I really think I'm eventually getting the hang of Total Mix after watching this very informative tutorial!
Thanks so much for this. Can't believe it's taken me two years to find it.
For the last question: there is a much easier way. If you have the same mix for phones and speakers and you want to switch between outputs (like there was said) you just set up your phones as Speaker B and use Speaker B button (which can even be assigned to a physical control on the interface in the Key Control Settings). You can also configure Cue settings and use it to quickly send some channels to phones without touching faders. TotalMix is full of features that are worth to explore.
i am trying to get a solid clean guitar or bass hi_Z signal going. Are the line iputs truly for hi-Z instruments? With only 9db of gain, a Fender Strat, or Precision BAss leave a lot of headroom on the table, It goes to -24DB to -12db , when playing normally. That is not enough gain, ideally. My Motu ULMk5 easily can add +25db on these inputs, and I usually ad 15db to be in the safe zone. I would certainly not want to use a preamp or DI box with a high quality audio interface with Hi-Z inputs - hence me asking - if these are truly Hi-Z inputs . And why only 9db of gain? (when switched to -10dBV ). Getting proper gain is way more important for guitars or used than line inputs since few peole will connect a keyboard these days in that way.
this rocks thanks
This was easily the best breakdown of how to use TotalMix FX. The software playback area was what was confusing me.
What is causing the random audio distorted repeat glitches? I hope it's not the RME interface you are reviewing! I've had those glitches on Sound blaster cards but not very often.
I own a babyface pro FS how can I get this software plugins? Please reply
Ever since I got to use one of these in place of my cheaper interface I've been pining for one.
Shame it only has only 2 line output, impossible to reamp for exemple and monitor at the same time ?
Can you just use this with the iPhone?
So…you can use the Babyface Pro FS as a standalone interface?
Not sure what that means. You can use it as an interface for Mac, Windows, iPad, etc. Or, you can use it as a stand alone AD/DA or mic preamp. If it's used as an interface via USB, that is not "standalone".
@@JeffPetersenSynthax I got confused by what he said. It sound like he was saying stand alone in that you could run your mic, guitar etc into it direct to speakers.
Is the RME Babyface Pro FS for guitarists only? I have a Nord Stage 3
No problem, the synth can be connected to the Instrument 3+4 inputs as well.
@@JeffPetersenSynthax Could I connect to the back of the interface since they’re line inputs as well with a DI Box?
I got Studio One 5 and BabyFace Pro FS.
Can someone give private lessons?
Im new to this.
Thank you.
Hey, I just purchased a Babyface Pro, and im asking myself where can I get the additional software from? (SGear etc)
This offer is only for North America , you can submit your info here for validation: rme.to/babyface
Is there any offer/product included available nowadays in Europe? Just asking, as I am deciding about a new interface. Thanks in advance.
what micrphone are u using to record this video?
hello, where to connect the external preamp? into mic input 1-2 or instrument input 3-4?
If you use a balanced connection then use the mic inputs (XLR).
@@JeffPetersenSynthax thanks)
in mic input 1-2 you have to use 0db in order to avoid internal mic preamp. That means you can use an external 4 mic preamp.
can I do this on babyface fs?
I'd like to send recorded guitar track to an external analog reverb/delay and bring it back in stereo with speaker monitors connected. is it possible , I mean how do I send signal out besides main outs
You cant
@@adamcourtinot5520 it turnes out you can, have to use an headphone out as outs, im in love with this thing
@@MARBSTUDIO you can use the high impédance headphones out for reamping or sending to reverbs etc ?!
Can you explain me where did you learn it and if it works well
Did you use a TRS to 2 mono cable and then just use one of them and panning your track in tour DAW ?
@@adamcourtinot5520 didn’t get to do it just yet
Support dude from RME told me this is how it’s done
You need a split stereo to 2 mono cable
A shame that we can't get this unit anywhere whatsoever ...at least in Europe
well it is a 100% German product obviously, like most audio tools...so probably even less available in the usa
Sure you can.
@@pianostuff191 yes, now you can with no problems, but paying nearly £200 more than the normal price at £600 about 1.5 years ago. At this current price, for £800 or more, this unit doesn't really make any sense anymore for what it offers.
@@PM-yz8fx I agree, that price raise makes no sense.
Is it bad if I have the baby face pro FS powered on throughout the day daily? Is it built to power on for long hours of use? How would this portable interface compare with the larger RME interfaces i.e. UCX or UFX+ in terms of being able to stand for long hours of usage? I do want to say that my Babyface Pro FS does get quite warm to being hot when left powered on throughout the day mainly being used in my home studio.
There is no problem with leaving the unit on all day.
How can l record (clean), direct, my guitar, and than being able to re-amp the recorded track (Nuendo/Cubase)? I’d like to send it (re-amp it) to my Kemper for a wet stereo signal (which l need 2 more inputs for this)? Also l forgot to mention- l need to connect this interface to my studio monitors (Mackie 626) - so another 2 Outs....?!?
I need help please!!!!!!
What the heck are you talking about Instagram on UA-cam comments...? The world is full of weird people... Anyhow...
For me it was in Windows (C:)> Windows> System32
0.8 FPS
What a laggy vid, hope that babyface users don't experience such a horrible cracky recordings with digital bugs! Wouldn't wish anyone to buy a 900$ soundcard with unable to record clear audio!(
I just got a Babyface Pro FS and experiencing a lot worse bitcrush distortion interuptions. At least once every two minutes. After looking at forums apparently very common problem. Running MacBook Pro 16" i9. Never had a single problem with my UAD Arrow. Sound quality and latency wise, it’s a definite win for the RME!
@@daveandrew7014 Guess what? I just got my UAD Apollo Twin X for my windows (100% Compatible) Sadly UA isnt transparent, they claim its compatible however its not, it sucks, I shouldn't have to troubleshoot for 24 hours, when i spent $900.
I found a solution for my RME signal interference and cut out problem by turning off and on both my Wifi modem and the Wifi on my MBP. After only once reset, the problem never came back.
@@daveandrew7014 glad to hear, I’m very upset with my Apollo, just spent $900 just to return it
Tommy how do you know it’s not the RME here in this case?
worst interface of all time. 48 hrs and still battling to live track and channel properly, good god, got a neumann and babyface and cant even kick my feet up. horrendous
Please call our tech support for assistance 1 954-626-0674. We are happy to help you.
@@SynthaxInc 😂😂😂sorry for the rant i was extremely frustrated but ur video helped the most. All others assume we know and gloss over some details. I hear sound its aliveeeeeeeeeee
@@Henock.10 Its an RME man be patient with it. Its a great interface
LOL! @ 4:49 "We've improved the AD/DA convertererererereez" That and the laggy slide show aren't good examples of bug free hardware/software and drivers. NOT your best showing. And I dig your company and products. I totally want you to win....but this is just bad.