The Perfect Size Workbench/Assembly Table (or 2x4 CNC stand!)
Вставка
- Опубліковано 28 вер 2024
- Building a workbench/assembly table/2x4 cnc table.
Ariat - 10% off your first order! - bit.ly/3cICGCz
Home Depot - Milwaukee M18 FUEL Hammer Drill and Impact Driver Combo Kit
homedepot.sjv....
I2r CNC - i2rcnc.com/pro...
Assembly Table Build Plans - www.johnbuilds...
Check out all my other plans! - www.johnbuilds...
JH Circular saw shaped push sticks - www.johnbuilds...
Follow on Instagram: @johnbuildsit / johnbuildsit
Facebook: / johnbuildsit
TikTok: tiktok.com/@johnbuildsit
All tools/products Used:
Milwaukee Fuel M18 Drill & Impact Kit - homedepot.sjv....
I2r CNC - i2rcnc.com/pro...
Omniwall Metal Pegboard - omniwallusa.com/
4’x8’ Bora Centipede Work Table - amzn.to/3uN1h11
Kaizen Foam - amzn.to/3LWILfj
Inset Door Hinges - amzn.to/3Ipgn3h
16” Drawer Slides - amzn.to/3JWWaSF
5” Drawer Pulls - amzn.to/3BStM17
12” Drawer Pulls - amzn.to/3IpsGwi
Flush Cut Edge banding End Trimmers - amzn.to/358dTI5
2” Black Edge Banding - amzn.to/3M1oPry
Birch Edge Banding - amzn.to/358yr32
Castors with Leveling Feet - amzn.to/3BQ9bL7
Spray Shelter - amzn.to/3hizK28
ZipWall(Spray Booth) - amzn.to/3uBbiAV
Kreg MultiMark Measuring Tool - amzn.to/33yioF0
Kreg K5 Pocket Hole Jig - amzn.to/35nH7T3
Kreg Shelf Pin Jig - amzn.to/3JUnCjP
Kreg Hinge Jig - amzn.to/3hivGyJ
Kreg Right Angle Clamp - amzn.to/3JUoPrn
Cabinet Hardware Jig - amzn.to/355Jlqy
Milwaukee 18g Brad Nailer - homedepot.sjv.io/A4Lkx
Makita Plunge Saw - amzn.to/32Yizz4
Makita 55” Track - amzn.to/3pi0Tqc
Freud 3/16” Spiral Router Bit - amzn.to/3IpgM5w
Freud Spiral Flush Trim Bit - amzn.to/36xrSHG
Dustopper Dust Separator - homedepot.sjv....
Bessey Trigger Clamps - homedepot.sjv....
Milwaukee M12 Fuel Hammer Drill & Impact gun - homedepot.sjv.... or amzn.to/2OWb4h9
Delta Dust Collector - amzn.to/3e2ZYF6 or homedepot.sjv....
Delta Cruzer 12" Miter Saw - amzn.to/3sCK88c
Bessey 50” Parallel Clamp - homedepot.sjv....
Bessey 24” Parallel Clamp - homedepot.sjv....
Bessey 1/2” Pipe Clamp - amzn.to/2sn5soq or homedepot.sjv....
Bessey 3/4" Pipe Clamp - amzn.to/34csCkZ
Ridgid Table Saw (New Model) - homedepot.sjv....
Rockler Inset Door Jig - www.rockler.co...
*As a Home Depot and Amazon affiliate I earn from qualifying purchases made through links on this post.
Just built a slightly modified version of this assembly table using your plans. I absolutely love it!! Thanks, John! I reduced the height of the side doors and replaced the top drawers on both ends with 'cubbies' so I can keep clamps and tools off the table when working.
Awesome man, that’s a good idea!
This is by far one of the best looking tables I've seen
Thanks man!
Holy smokes! What an awesome cabinet. I can't believe you would even think not to paint it. It's very inspiring.
Definitely worth it, just extra time is all!
Good job! Looks clean! I was watching this with headphones, and just a tip would be to check your audio :) Audio is just as imp as the video when it comes to YT! Keep up the good content!
That size work station is perfect. I like all the drawers in it also. I liked and subscribed
Thank you!!
It turned out really nice!
Thank you!!
Really really nice video and build! The one thing that would complete it would be a tad better audio. You can get away with great audio at such a good price nowadays. Curtis judd is my go to channel for audio.
Cheers! :)
An absolute great job! Wish I would have seen this before I built my work bench!
Thank you!!
Try the Milwaukee Fuel Hydraulic impact driver.
Quiet and powerful.
I have the m12 version. Love it
My OCD thanks you!!!! NICE BUILD!!!!!
Thanks man!
If I could give this video 100x thumbs up, I would! Friggin sweet build and looks incredible!
Thanks man I appreciate it!
What a beautiful project! Thanks for some inspiration for an outfeed table!
Thanks for watching!!
Looks great in your shop!
Thank you!
That’s really cool! And thanks for adding my name!
Hey john! I love your channel and I may borrow some ideas from this workbench. If I can make a suggestion (and I dont know what hardware you're using right now, so forgive me), but upgrading your mic that you're doing voiceovers with, with perhaps a Blue Snowball (sub $50) and a pop filter could really up your voiceover game. It's amazing how cheap and good they sound!
The sad thing is, this is a highly recommended $250+ microphone haha. I did this voiceover like 8 times and this was as good as I could get it before getting too frustrated. I don’t get this stuff lol, going to go back to my old mic for now
@@JohnBuildsIt I'm not an audiophile, but depending on the mic and what software u use, you can probly dial that bad boy in real good! But ya that sorta work is pretty frustrating.. I usually just find a UA-cam tutorial vid of someone with the same mic as me and copy their settings and tweak from there. Good luck!
Fellas, I work professionally in video production and agree with Mike’s suggestion. Blue Snowball is made by Yeti-my go to company for web-based voiceovers. Any yeti mic will work wonders for clean sound.
Btw, John love the assembly table. I’ve loved seeing your channel grow since I first discovered your shop vac dust collection jig years ago.
Love your work! I'm a graphic designer and I was a kitchen and bath designer for 15 years working for Lowes and other big box stores. I started making my own cabinets simply because its easy and I love working with wood and combining my art with my projects. I heard you say you are in Indiana. I lived in Portage for some years selling cabinets for Lowes but I moved back to Illinois where I run a custom airbrush shop at one of the local amusement parks. We should totally do a collaboration piece. Love the Ariat gear too. Totally my style
That’s awesome man. Thanks for watching!
Looks great! Nice work.
Thanks!!
It looks awesome
Thanks man!
Great job, man!
🙌🏼🙌🏼
What part of Indiana? Fellow Hoosier woodworker here.
Really Nice Man!!
Thanks!!
Nice build...
Thanks!!
Nice work👍🏻🇬🇧
Thank you!
Super cool!
Thanks!!
nice workshop man ... :)
Thank you!
The kreg hinge jig has cams with different offsets do you know which to set it on for the doors
What is the foldable sawhorses you have I didn’t see them available down below. ? Your using them to make this project
Bora centipede. It’s linked 👍🏽
Nice job. curios what blade you use in your track saw? Love the way this turned out. Going to investigate your choice of CNC as well.
48t ATB usually for plywood
What is the finished height minus the casters. I'm thinking about using this as an outfeed table.
34” with the 3.5” castors I used. So 30.5” without
what is the color and color code that is on your miter station as well as the workbench
Grant Gray. It’s a Bear color from Home Depot
Your paint finish looks amazing! What type of paint did you spray?
This is just Bear urethane alkyd from Home Depot. Wouldn’t necessarily recommend it for a kitchen haha but pretty nice and cheap for shop stuff
@@JohnBuildsIt Well sure looks amazing ! Thank you for the response!
What determines which hole in the Kreg jig to screw? I noticed there are three.
Just spacing for your specific material. There are 2 that are closer together that are great for like a 1x2, and the outside 2 are good for a 1x4. So you can drill without having to unclamp and move the piece
@@JohnBuildsIt , thank you very much for the explanation. I love your videos. I'll never build anything, but I find the process fascinating.
Hey man enjoy your videos also just bought your new push stick.
Question where did you get your hose attachment to you track saw ???
I appreciate it man. Got it off amazon! Comes with a bunch of different fittings amzn.to/3Ddv7Aw
Great job man. Can I ask what hose setup you're using with your Makita track saw?
amzn.to/3pFGnzP
Really good value with all the adapters that come with it👍🏽
Hoo-hoo-hoo-Hoosiers!
Thanks for the video. What kind of paint sprayer do you use? I didn't see it in your links.
Graco 9.5 HVLP usually. I just got a new Graco GX19 airless sprayer and that’s what I used on this to try it out
Fishers/Fortville area here. Where do you typically get your hardwoods from?
Wible Lumber in South Milford
What is the single side edge trimmer you used to trim the black edge banding on the black melamine top?
Band-It edge trimmer👍🏽
Are plans available for this build?
Yes. They’re linked in the video description
Do u guys think this will look good in my garage/gameroom/billiar room/gym to use it as a table?
Good option if you need the storage!
Eccezionale
What shop vac system is connected to your track saw?
A new idea Dustopper is working on. Check out their channel for videos on it
Split the number of cards for the vertical and what? I can’t make out what you are saying
Into how many gaps there are. 4 in this case for 3 drawers
Great job, how tall is the bench?
34” with the castors I used
@@JohnBuildsIt Thankyouthankyouverymuch!!
👍
while $300 is a month worth of minimum wage around here, the results are quite nice
That’d be like under $2/hr, where the heck do you live?
Cancel I just saw it in the video
I just noticed you’re using the quick clip connections for dust collection. I ordered mine from Amazon, love them and they make such a difference
I love how clean and organized your shop is. Love these builds
The mess is just hidden inside cabinets😂
This has been one of my favorites to watch!! Love how this turned out.. This idea could be used in a kitchen as well for maybe a kitchen Island!!
I could use one or two in my sewing room and also one in the workshop. So practical, lots of storage and looks great. Thanks for the video.
Thank you!!
Ya know, maybe my brain doesn’t work as well as others, but this is the first video that I’ve seen that covers EXACTLY how the playing cards are used as spacers for the drawer fronts. I feel like many things like that are glossed over. Thank you for taking the time to cover these newbie tips!
Dang really?? This was me breezing over it actually haha since I’ve shown it a lot better in several of my other videos. Thanks for watching man!
Great build John, Very nice cabinet and I love the features you have included! Never have considered the type of top you used but will In upcoming builds, very clean! Those casters are over the top, first class all around. Of course a well done video made this build very easy to follow and enjoyable to watch!
Thanks man I appreciate it! 🙌🏼
I wish plywood was that cheap in Australia...
Looks great! Do you happen to have the color code for the paint or know the paint color on the cabinets. It's like the perfect shade of grey.
Grant Gray, it’s a Bear color
@@JohnBuildsIt awesome. Thank you!
Funny how two years ago melamine was cheap... now it is more than MDF which is triple what it was in 2021.
No kidding!
Here in Sweden a sheet of birch plywood costs $200! That's $800 for the plywood alone! That's the price of high end furniture! Dear lord the prices have gone up!
Yikes! That’s crazy
Nice, looks clean. I tried Omniwall but those pegs are extremely difficult to remove once you put them in
Oh really, mine don’t seem too bad! There’s clip remover tools you can get for them to make it easier too
Love the build! Can you make a video on how you modded your shop vac? Is it a dust separator? 0:39
I didn’t make it, it’s something Dustopper was working on and sent me to test
I clicked on the link for your CNC all I got was page not found. Perhaps that model is discontinued?
Interesting, it does look like they have new versions now!
great build. And I love the look and color of all your cabinets. Super clean look
Thank you!!
Nice
Amazing work John as usual! Noticed your new modified shop vac…. Interested by it, will look for a video on it.
Check out the Dustopper channel. They have 1 vid up and will be doing more 👍🏽
+1 on hoping to see a video on that shop vac. I'll checkout dustopper
It's always amusing to hear inch translations of the 32mm cabinet system, hinge cup drilling etc.
Excellent project and video, John! Seriously, it was well thought out and implemented. And like the title said, The Perfect Size Workbench. Thanks for sharing, my friend. Felix
Thanks for watching!!
OMD
When the shop builds can still look good in the shop ! Great video
You know it, thanks!!
Nicely done. Well thought out concept.
Thanks man!
Nice work! Looks awesome!
Thank you!!
very good job. it looks premium. what tool did you use for paint?
Where can I find the plans?
www.johnbuildsit.com/plans/p/3-x-5-assembly-table-build-plans
how much plywood did you end up using ? and the total cost of this project
@1:10... measure with the material, always the most accurate!
How did you do this on UA-cam with no Woodpeckers Tools or Rubio Monocoat? I didn’t even know it was possible.
Hahaha no kidding. I do use Rubio a lot, only in a couple videos though I think. Wish I got it free like all the other guys! Lol
Nice work. Tell me how you like the makita track saw and why you went that way as opposed to the festool. Thx
I really like it, no complaints. Price and the fact I have other Makita tools was the reasoning
Nice bro think yuo
Thanks for watching!
Great video, concise and easy to follow! Question, with so many brands of drawer slides offered on Amazon, can you tell me the brand or make of the drawer slides you used in this build? Thanks for the great projects!
They’re linked in the video description 👍🏽
I like the build.
especialy the casters.
One note.
Fix the audio.
Your mic sounds a bit like its to close to your mouth.
Quality isnt amazing.
I know, working on it 👍🏽
Great build John! I noticed your modified shop vac in the background around the two minute mark of this video. I was wondering if you have a build video for it? Thanks.
Check out the Dustopper channel, they’ll be making more videos on it 👍🏽
Your video capture and content is great, but I'm hearing some high-leveled audio distorting from your narration. Constructive criticism. Thanks for the content!
I know, working on it for the next vid👍🏽
That is super slick man! How do you find time to do things with kids? You give me so many ideas then I'm like... Oh ya, responsibilities. NVM
Haha early mornings and late night man
Do u have a video showing the ridgid vacuum set up with that plywood spacer in between the lid and bucket? It looks very interesting. As always awesome content I always look forward to seeing your videos.
Dustopper does on their channel and will be making more 👍🏽
I initially did a mistake fat finger thumbs down. If you see that, please know it’s a mistake. This is a great looking piece! Love the video.
Haha no worries. UA-cam hides the thumbs down number now so people don’t get their feelings hurt 😂 thanks man!
with the Milwaukee tools do you still have to buy some sort of fuel along with the battery I've always been a DeWalt fan and still am and I've had huge success with them but I'm always willing to try something else
No just the batteries👍🏽
I really like your drawer and cabinet configuration, especially with the pegboard added. It makes the best use of the space.
Thank you!!
You should probably mention in your plans that the cultist does not follow grain direction Also does not have blade kerf calculated so some of the cuts have to be spot on with no room
For error, also the middle door hinges should be on the same side if on opposite side this will not allow the center shelve to be pulled out.
There’s room for 1/8” blade kerf between every piece on every sheet. Tilt the shelf and it easily pulls out like most cabinets with face frames.
Great job as always I like pvc boards and decking I work for Royal building products check them out
Nice! Just used them on my deck 👍🏽
My local Lowe's did away with Birch and now carries Maple at 79 bucks a sheet. Four weeks ago, it was 99 bucks a sheet.
Nice! Ours was back lower here but went way back up again now
Very nice cabinet! I’m I. The middle of the f building a similar cabinet / cart / mobile work surface. My inspiration was one built by Shop Nation. Enjoy!
Awesome, love his channel!
In regards of custom sign made with the CNC, how do you advertise in order to have them ''come without even trying'' ?
People just ask me to make them. Word of mouth, etc. I don’t advertise that I do
Turned out real nice. If you have the time can you provide me the Blum part number for the frameless, inset hinges you used. Thanks
These weren’t Blum but the ones I used are linked in the video description 👍🏽
Where did you find those black drawer slides?
Amazon
Awesome video..... hey whats up with that vacuum in the background
It’s a new idea Dustopper is working on with their separator, check out their channel for vids on it 👍🏽
Also do you have a video on that top on your shop vac in the back round? Just it just add capacity or does have a cyclone effect?
It’s a new idea Dustopper is working on. They’re starting to put videos about it on their channel if you want to check it out. Basically puts the Dustopper separator inside the vac to eliminate hoses, and have the full capacity of your vacuum instead of a 5 gallon bucket
Thoughts on that Bosch router? I find my plunge mechanism sticks
Love that router. Actually haven’t used the plunge base on that one very much, but no sticking issues with mine
I've watched this three times now over the last few days. Such an awesome build, man! I'm totally going to use this as a reference when I build my next bench.
Thank you!! 👊🏼
Where did you get that vacuum attachment for your Kreg Pocket Jig?
I’m not sure. It’s Shop Vac brand though
what is the lenght and width of your shop? excellent project. thanks
24x32
I would definitely be interested in learning more about your CNC... I've got a small one now but, I am looking to expand and I2R has grabbed my attention.
I’ll start using it more in videos. It’s been a really impressive machine!
Man that is 1 aweso.e, clean build with high functionality!
Thanks man!
Awesome build. I've been subbed to your channel for a while and its like you're in my head. I was just telling my wife how I wanted to build a new outfeed table with some storage then boom here is this video.
Haha awesome man, thanks for watching!!