ua-cam.com/video/13fgBBI-ZXU/v-deo.html check this out, you can download the preprocessor and model indivisually if you cannot see them from huggingface.co/lllyasviel/ControlNet-v1-1/tree/main as seen in the Controlnet video
I just checked it it still works in the text2img tab using control_v11p_sd15_inpaint [ebff9138] model and inpaint_only+lama or inpaint_only as preprocessor, i have not got this error before.
Hey there, thanks for the video. I have a minor problem about dragging the image from generated panel to controlnet interface. It just does not work! Can u guess why?
if control net is enabled and working properly, this should not happen, unless there is a black line at the side of your image you cannt see by yourself (padding), so test another image and see the output, if you are still getting black bars, then there is some issue in your control net inpaint checkopint installation if remaining settings were followed correctly
I have seen other Mac users getting the same error, some reported its resolution by upgrading to pytoch 2.0.1 which can be done using git pull you can check this video to upgrade all of your A1111 to the newer version ua-cam.com/video/71HTtRSXsAc/v-deo.html (you can also delete venv folder first before you start the upgrade just to make sure that the installation is clean) and hopefully it resolves this issue.
possibly you increased the image size too much, it is best to do step by step, one direction at a time, keep trying, you will figure out how it works best, try and error, it may take several trials to get something acceptable ... also some checkpoints are better for this task thank others
@@AI-HowTo the issue was I was in img2img mode. Worked great after I switched to the standard mode and used the ControlNet models you linked to before. :)
This was perfect. No one else has explained this so perfectly in such little time. Well done.
Thanks, it's great to hear that.
Thanks for your outpainting series! Very helpful.
Glad it was helpful!
where to get preprocessor and model ? mine are empty
ua-cam.com/video/13fgBBI-ZXU/v-deo.html check this out, you can download the preprocessor and model indivisually if you cannot see them from huggingface.co/lllyasviel/ControlNet-v1-1/tree/main as seen in the Controlnet video
is this still working? I'm getting this error: ValueError: No mask detected for ControlNet inpaint
I just checked it it still works in the text2img tab using control_v11p_sd15_inpaint [ebff9138] model and inpaint_only+lama or inpaint_only as preprocessor, i have not got this error before.
awesome video
Hey there, thanks for the video. I have a minor problem about dragging the image from generated panel to controlnet interface. It just does not work! Can u guess why?
You are welcome, not sure, I have not encoutered this problem before, if you have not updated A1111 for a while, that might be the reason.
Doesn't work with SDXL.
Never think of inpainting for outpainting job( sounds confusing right?) Thanks so much for your easy to understand lessons.
yes, I think in the future we will get better tab for outpainting alone that doesnt require these tricks hopefully.
i only get black bars when i change height or width :/
if control net is enabled and working properly, this should not happen, unless there is a black line at the side of your image you cannt see by yourself (padding), so test another image and see the output, if you are still getting black bars, then there is some issue in your control net inpaint checkopint installation if remaining settings were followed correctly
why I got this error: RuntimeError: Input type (float) and bias type (c10::Half) should be the same
I'm Mac M1
I have seen other Mac users getting the same error, some reported its resolution by upgrading to pytoch 2.0.1 which can be done using git pull
you can check this video to upgrade all of your A1111 to the newer version ua-cam.com/video/71HTtRSXsAc/v-deo.html (you can also delete venv folder first before you start the upgrade just to make sure that the installation is clean) and hopefully it resolves this issue.
@@AI-HowTo Thank you so much! Delete VENV folder works!
great to know and best of luck
Huh. It could be cool to integrate this as a GIMP or Crita plugin.
This just stretches the colors down to the outpaint area for me
possibly you increased the image size too much, it is best to do step by step, one direction at a time, keep trying, you will figure out how it works best, try and error, it may take several trials to get something acceptable ... also some checkpoints are better for this task thank others
@@AI-HowTo the issue was I was in img2img mode. Worked great after I switched to the standard mode and used the ControlNet models you linked to before. :)
You got my sub