GM Throttle Body Relearn using Autel MaxiDas DS708
Вставка
- Опубліковано 29 січ 2025
- In this video we use the Autel DS708 to relearn the throttle body on a GMC Yukon with a 5.3L engine with very high idle speed.
The throttle body was replaced because it was sporting a TPS DTC P0122.
As we see that the actual throttle plate position was at 24% causing high RPM at idle, while the desired plate position was 13%.
The throttle body was replaced with what looked like a known good used one.
Besides resetting the idle on this truck, I'm showing the capabilities of this little scan-tool which has given me very great results so far. Some of you asked me about this tool so I will share short clips on it capabilities.
For more videos like this one or thransmission repair videos please click the subscribe to go to my channel, you will find them there.
Thank you for watchin.
I cleaned my TB and it started idling crazy and the rpms was off at high speed. This video educated me on the relearn process!! I purchased a Foxwell scan tool and fixed it in 5 mins. Thanks for this awesome video.
which foxwell did you get?
@@marrob_ltz1011 I used the NT510 but the NT520 will work also.
What a great step by step video that helps me to learn even more functions on my MaxiDas. Thanks.
thank you , almost have to be a rocket scientist to work on these cars today
Not really! The tool is doing all the heavy lifting.
excelente video Hiram y gracias por compartir tus experiencias
Thanks a bunch. I'm sure whatever you come up with for teaching how to read transmission oil circuit diagrams is gonna be awesome :)
Thanks brother this infor is what I needed to know. Great job explaining everything
Almost sold my scanner ima keep it thank you
Great channel Hiram. Watch almost all the videos. Super helpful. My MaxiDas does throttle relearn and other special functions way better than my Verus
Great vid. Look forward to more
Great video and love the scan tool. Will probably buy one
Explained very clearly...super understandable Video, thanks alot
Great job my friend.. Excellent explanation
Nice job on the TPS relearn. Could you please perform a transmission relearn on the GM 4L60E /4L65E /4L70E in the near future. Thanks
I cleaned throttle body and used my snap on scanner to do re learn but my idle wont go down still at like 3000rpm any ideas.. idle was fine before cleaning it but had code
Another great video. Thank you brother..
Great video, can we see some more please along those lines.
Hola amigo. No me sale igual para un 2011 terrain 2.4 Cuando toco increase sube el tp indicated angle pero el app indicated angle se queda en 0 q puedo hacer?
Very nice method thank you so much
very well done. sam
Great video. This can happen on many GM vehicles from just cleaning the throttle plate. I cleaned the throttle body on a 2011 Chevy Malibu and this happened. I was thankful that the Auto Enginuity software I was using had the throttle relearn. I am thinking of buying this tool in a few weeks.
Have to adjust m8ne as well but the codes I have will not let me clear them 07 Sierra 4.8l Foxwell NT510 Elite scanner and suggestions would be great thanks
Great video. Thanks a lot. I have the Tech2 and the steps are fairly similar. I could do it easily.
Awesome Video !! Thanks for the help
Good Job PaPa. Thank You.
Thanks would you please share the Scanner tools where can by buy also model
If I don't have that nice scanner. Can I reset it by pulling the pcm fuse?
So my idle stays at a 1k RPM when I’m slowing down at a stoplight or stop sign or even when I’m slowing down and release the gas pedal it will stay at the same 1k RPM can you help me?
Great video !!
Is there anything the scanner does not do that other scanners usually do any info would be appreciated looking to invest in this scanner. Does it do mode 6 or programing fuel control modules , body control modules or crank relearns , evap testing. Thanks
Can I do this procedure to a 2005 g35 6mt? instead of doing the three step throttle body learning procedure. it's idling at 3k rpm on cold starts and immediately shuts off its self after 45 seconds.
Nice video,well done.:)
Hiram Gutiérrez what's other options to reset throttle body , I don't have diagnostic tools.. in my 02 Yukon I cleaned inside throttle body and I also removed the butterfly valve , I know sounds dumb but I did it. after I cleaned it , I put everything back and crank the truck it started idle hight 2000 rpm kept going up .. what I need to do ?
this Autel DS708 works for 2008 hummer H3 alpha, I need to do the same procedure
This happened to my truck 2010 Silverado changed the throttle body and now is 1,200 rpm idle to high I don't have this scanner or computer where can I take my truck to fix and how much is going to be thanks.
I have a question. I got a 2007 gmc yukon. And i was driving at 75 mph. And then the check engine light come on.. and wont pass 60mph.. so i put the scanner i got a code for throttle body. Ao i bought a new put it on .. i did the relearn reset .. still doing the same thing but no codes . 3-4 gear rpm go higher to 3000 so i have to release the gas pedal so it can catch the gear. . Any suggestions. Thank you..
hi can i use tech 2 for reset the throttal body or adaption
Hiram, Will this scanner can do Saab cars? I mean Does it has Special test for Saab?
Nice video. Good job. Thank you.
ävö.nönh
Very good video..i have the maxisysmy908. You teach me
A question Hiram. I want remap my 2007 Impala SS ECU, what tool you think is better.
hey brother i have a 2006 Chevrolet impala 3.9
i cleaned the throttle body and lost the idle to 2500
i have the autel maxidas ds708 scanner and tried
to reset it. i follow the video while i was doing it ant
it doesn't give me the idle reset option. can u help
thx u..
Can you force the evap monitor to run or do the purge/flow test? Does it have the misfire data like the tech 2?
it does and for only $1,200.00
Just cleaned my throttle body today took apart from the mount and after I put it back together my idle is sitting at 2500 almost 3000rpms. Guess I will take it to GM to recalibrate it🤷🏽♂️ but after a few drives it idles at normal(500-600rpms) but when I rev it will go down to 1500-2000 and stay there...
Hi man.. I got the same issue... Did u got any solution for this? Plz help me out. After reset..idle came to 550 but when i accelerate it.. It goes up and does not come back. Any suggestions?
Also a saw some videos that did ground cleaning. The one underneath the front driver door when normally lifting jack is placed to change the tire. But with me it did not work.. I try to drive the car much.. Still same.. I will wait to drive 2-3, days lets see.
Rpm is at 1300, can this device reduce it to 500-800 ?
Could it adjuste the throttle body by default ?!
My car is Peugeot 206 1.4i 2006.
Is throttle matching or throttle adaptation same as idle relearn ??
Did you ever find out?
nice machin
what tool are you using
Can you do that to a 2002 Chevy Tahoe
good video
hi thanks for that.. u can do some for boost presser sonsser ???
Hi Hiram, like your DS708 videos. I also have a DS708 that I have not updated it since mid 2014. You seemed to do quite a bit of advanced procedures with a DS708 that Autel only lists it's coding abilities as minimal, while the Maxi Sys 908 coding abilities are listed as advanced.
Since you bought your MS908 I know the hardware is better and in theory could offer much greater ability to process more complex coding ability , but in reality did you notice if it really offered way more needed coding features than the DS708 seemed to have (aside from the Pro's online programming for BMW and Mercedes and using it's Maxi Flash J2534 off a windows laptop after purchasing a paid OE subscription, that you actually found and need that your DS708 lacked with it's so called minimal coding ? Thanks,Jim
buenas noches queria saver si pueden subir un video de como armar una transmission de una ford 2005 no 4x4 la reversa se patina les agradeseria mucho muchas gracias
How to Get a programming device ?
?and where I buy it
I flippin mo mo, you have one goal, hold the camera straight. D- for performance & delivery. B+ for overall purpose
que tal Hiram cometi un herror con el throttle body de un Pontiac y las revoluciones suben hasta 3000 me podrias ayudar para hacerle relearn mi scanner solo agarra hasta el 2005 y el carro Es 2009 yo me encuentro en el condado de San Bernardino gracias
How much is for this tool
Thanks dude!
I was getting a throttle position sensor code, replaced it
Programmed with my Autel scanner
I need that tablet tool
What type of scan tool?
This is an old Autel DS708.
The new Autel Maxisys will do it as well.
Hi Hiram. I have 2008 chevy silverado Turbo diesel. need rest gas pedal. Tanks
Mine on open throttle only resets 80% and at idle in drive it’s 20%
I set my throttle to 900 with this maxisystem computer diagnostic device but now i want to reduce it it wont
It ask me for up mean raise rpm but down is disable why 😲🐸😲🐸😭😭😭
buen video loco pero yo tengo el scanner pero no encuentro el procedimiento para una silverado 2003 nose si me puedes ayudar
no
good video amigo
bleeding the ABS system with the ds708
Greetings Hiram. Quick question did that option come with the scan tool or did you get it with an update? Our Autel maxisys doesn't have that option for none of the gm vehicles we've replaced a throttle body on. By the way, I love your videos, thanks for sharing all that knowledge with us. Keep the good work up.
+Hiram Gutierrez Thanks for the input, I'm close to buy a ds708 that's why I asked.
se puede programar los subtitulos en español==
1= ve a settings (la margarita) haz click
2= siguiente haz click en (subtitles cc)
3=siguiente haz click en english
4=siguiente haz click en subtitles otra vez
5 siguiente haz click en auto translate
6=siguiente con la ruedita selecciona spanish
7= haz click en spanish,, y ya estubo te van a
aparecer los subtitulos en español.
hay videos que no tienen esta opcion pero
este si la tiene..
Amigo, ¿crees en verdad que valga la pena comprar este scanner?
¿Se pueden programar sensores de llantas de aire también? Ojalá que me puedas responder
Hiram buen video, ojala los tuvieras con subtítulos en español, la comunidad te lo agradeceriamos
se puede programar los subtitulos en español==
1= ve a settings (la margarita) haz click
2= siguiente haz click en (subtitles cc)
3=siguiente haz click en (english )
4=siguiente haz click en subtitles otra vez
5=siguiente haz click en auto translate
6=siguiente con la ruedita selecciona spanish
7= haz click en spanish,, y ya estubo te van a
aparecer los subtitulos en español.
hay videos que no tienen esta opcion pero
este si la tiene..
This is why I don't want to clean my throttle body. I really want to clean it but I don't own a tool like this and if it starts going crazy like this then I'm screwed.
For a video series y not show most all the workings of all the scantools you use y you use what u use and what you use them on. I'm sure a lot of techs would appreciate it and i thank you for taking the time out to do so.
Iam from iraq how can cnnect with you . thank yuo very mach
Bad language buddy
You said if we had any other ideas for any other videos to let you know. Well, I know I've asked for this before, and I'm asking again now. I'd like to see a video or possibly a series on reading an oil circuit diagrams. If you need an example of what I'm talking about, watch the video series on reading electrical wiring diagrams on the realfixesrealfast channel. I know electrical wiring diagrams and transmission oil circuit diagrams are very different things so if you did a video series on oil circuit diagram reading, odds are it won't be done the exact way that the electrical diagram reading series on realfixesrealfast's channel is done. If you listen to how he explains things and pay attention to how he conducts the series and starts out with the simple and gradually moves onto the more complex though, it'll give you a good general idea of what I'd like to see in a transmission oil circuit diagram video or video series. Thanks for what you do for the DIY'ers and the people who are trying to become professional transmission technicians.
Agh I need to know how to do it. do it