They have dent pullers that will thread in to the areas you drill with a hammer slide. This way you can concentrate on reversing how it occurred. Then fill and blend nicely. Old School
@@b1iss890Welding 15 washers on a door and run a rod thru it so you can pry a dent out it the definition of ignorance. Nothing skillful about this 😂 he literally fucked the door up more
It's not a tool for those asking. Its 30 flat washers welded to a door, a piece of round bar, part of a shackle, and a homemade slide puller. There's better ways than this.
@@agungmarpaung6366 Interesting question. Student to student ... Operationally as in motor and drive train I don't think so. The repair change was focused only on the surface skin of the door. Whether or not the interior structure of the door was damaged in the accident prior ... is possible .. no way to tell from the footage. Would the pulling the skin out do damage to that interior structure? Unknown ... it certainly could pop a weld since the dent puller is not a gradual applied force but a jarring impact. What do you think?
Most of these people criticizing in here don’t even understand autobody dent repair work on hard bodied lines or even own cars then there’s the ones who are in this field just complaining about the bubble and how they would’ve done it 😂
Price maybe? My rear doors cost about $1k if i could have a body shop fix a dent, an get it painted at even 3/4s of the price thats still saving 250. Sometimes insurance doesn’t wanna shell out more than they feel they have to aswell.
I had damage on my truck door similar to this. The repair shop didn't pull the dent, they slapped some putty on it and painted, the putty broke out a few months later. I like this guys effort.
@@509shaggy still a big waste of materials right? Replacing a door is at $2000-3000, repainting a door is about $300-400. Only requires a skilled worker.
@RB Zhang lmfao you say it costs 3 to 4 grand to replace a door not true and for 2 that would be through a shop then u say it only costs 400 to take the dent out and repaint but don't add the cost of labor assuming both people do the labor themselves just unbolting a few bolts lining them up plugging in the electronics and then replacing the locks is way easier and cheaper a door is like 70 bucks at pull and save
You have a good eye because I also noticed the high spot he created at the end. Spent 40 years in the business don't ever wanna work on another car again lol
I love the hustle! Highly Skilled hands great to see theres still beaters around! Knock that high spot down and give it a Skim! Carpal tunnel socks great work mate
As long as it's clean inside and you heat up a few spots red hot about the size of a quarter then apply a saturated cloth of water... you can take any wobble in the panel. ❤
@john smith because the cost of the door,R&R, edging R &I door guts and seals and fitting are way more expensive than repairing a square foot bondo , prime and paint
La tremenda" costilla" que se le hizo ala puerta cuando la "baje " con el martillo conque cres que va atapar las marcas ?? Y las lineas por fuerza va a tener que esmerilar y aplicar pasta o masilla....sigue aplaudiendo.
Im in the industry, its smart, but its alot of work. Then he has to grind them off. I replace the whole door in 5 minutes. As a customer it could possibly cost you less to bring me your than this guy
I think he really knows what he's doing , its on the edge of door no way to repair easily. Must be the most economical method and fast. The top part can be pushed back in, that some said for dented from repair, that's easy to do
There is a tool for this it uses copper pins and welds them and then a tool just like he’s using but a different tip and he used way too many washers 😂
That seems like a lot for a dent. When you can replace the whole damn door, would seem easier than welding all those rings on there…. I mean… you do you… ✌️
@@ericmcdonald88 Yeah, some cars but, that looked like a newer car. What the hell do I know, I’m more of a, 69’ Nova man myself or a GTO. Anything muscle, anything American… Maybe 44✌️….
No dicen que en Estados Unidos botan su auto con un solo simple choque y se compran uno nuevo. Si entran a la página de copart ahí encontrarán esos carros de remate
ремонт деталей и замена их ,это разные вещи. в данном случае ремонт. технология ремонта приемлема К тому же всё зависит от заказчика и времени и главное цены.
They have dent pullers that will thread in to the areas you drill with a hammer slide. This way you can concentrate on reversing how it occurred. Then fill and blend nicely.
Old School
😊😊😮😊
😊😊😊
😊😊😊
Yep did that60 years ago drilled a hole pulled it out filled it done!
This way, you don't have to drill holes... And it uses less bondo..
Bro welded on like 50 washers to fix a body line😂
I admire his determination, but we all know there’s a much better way. Plus now he has to grind all those off after😂
What’s the better way? We don’t know sht
Bro could’ve used a plunger for like 2.99 at your local family dollar
Might as well just buy a used door from the junkyard. But I admire his effort for not using a lot of bondo
Ah, that's actually how it's done in the industry.
''So anyways, I know this guy who can do it for cheaper''
This is how they do it professionally, just not as quickly and aggressively 😂
As always, China number One
This is actually a pretty good way to handle this. Especially along a crease. Don’t hate, stay educate..ed
@@Khylur_Getz
Х😊
He didn’t see that tictok where you just need a plunger.
No shit! Some people overthink it!
@@TheTrumpmancometh2024
I didnt see the plunger one, but there was a bunch of them using dildos
A plunger is not gonna take out something caved that deep
You guys just get dumber why more brazen in the comments it's really something to behold😂
Only came in for headlight bulb
I don't know but I say BEST COMMENT SO FAR. I actually spit out my soda.
😂😂😂😂😂😂😂 that is hilarious
@@clarenceratkowiak7287😅😅😅😅😅😅😅😅😅😮😅😅😮
😅😂
Now you damaged the rest of the door
🤣😁
I now😅so true
Only body techs know what he’s doing 😢 he actually has skill doing that
A Lil filler, sanding, primer, then paint, No one will never know the difference....
@@b1iss890Welding 15 washers on a door and run a rod thru it so you can pry a dent out it the definition of ignorance. Nothing skillful about this 😂 he literally fucked the door up more
Can't he just open the door and take out the inside door flap then knock out the dented part? Look like he overwork that easy job😂😂😂
Dude pulled the high line so hard he kinked the door skin 😂
It will get repainted so it's no biggie.
I saw that too .
Yea he did.. actually caused more damage where he buckled the skin above the top line.!
😂 I saw it
Stretched the shit out of it!
А потом килограмм шпаклёвки, и насрать на ТАКОЙ ремонт!!!!
It's not a tool for those asking. Its 30 flat washers welded to a door, a piece of round bar, part of a shackle, and a homemade slide puller. There's better ways than this.
😊
😂😂😂 pauvre type fait nous un vidéo meilleur au lieu de critiquer
There is, but I’m sure their labor rate doesn’t justify the tool investment
That is a slide hammer my friend.
Yeah but dose it do the job
My neighbor needs that. She hasn't seen the sun shine in years.
🤣🤣🤣🤣💀💀💀
Sick 🤢
I don’t get it
@@Magic-ns2hk don’t feel bad. I don’t get it either.
@@johnsellers9623 he kidnapped her
Wouldn't buying a new door be cheaper? 🤔
That's how I did it 30 years ago. Then you make a nice straight line with bondo lol
Exactly how it was done, and with a rivet gun. Nowadays they peel off the skin or go to the salvage yard and replace the whole thing. Quick and cheap.
@@jamescaneda9515 I did not use a rivet gun spot welder
Instead of welding to the panel I usually just go from the interior and use a metal-shaping hammer but thats just me
Thank you I’m not the only person who thought this was a waste of time might of been able to do do it an not have to repaint it either
@@seansadventure9413 you would have to repaint anyways on a body line dent
Love the use of a dent puller in a manner that spreads the force horizontally.
😅😅😮😅😅😅
Это обратный молоток 🔨
Does this hurt the car?
@@agungmarpaung6366 Interesting question. Student to student ... Operationally as in motor and drive train I don't think so. The repair change was focused only on the surface skin of the door. Whether or not the interior structure of the door was damaged in the accident prior ... is possible .. no way to tell from the footage. Would the pulling the skin out do damage to that interior structure? Unknown ... it certainly could pop a weld since the dent puller is not a gradual applied force but a jarring impact. What do you think?
@@michaelpcooksey5096 me think poor car
Looks too aggressive, you can see the upper panel is distorted
Stupid, it's the original panel
It's the design that is like that.
Most of these people criticizing in here don’t even understand autobody dent repair work on hard bodied lines or even own cars then there’s the ones who are in this field just complaining about the bubble and how they would’ve done it 😂
Right 👍
Yes, you took the dent out, but at what cost?
He took a dent out and pulled another in 😂
Х~х😢😢бошщл тонн😅сперва ъ-власть школа
@jasonx4179 there's gotta be a better way
@jasonx4179learn to drive a car properly so you don’t have to do this in the first place. insurance if it’s not your fault
I can't understand why humans are doing this 😂
As a girl who restored a car for 3 years when i was a teen, i can confirm i don’t know why anyone would do this 😅
Price maybe? My rear doors cost about $1k if i could have a body shop fix a dent, an get it painted at even 3/4s of the price thats still saving 250. Sometimes insurance doesn’t wanna shell out more than they feel they have to aswell.
@@malachi412 I'm just laughing because I don't have a car and perhaps I can't even buy one😆😅🤣
Aquí medí cuenta que mean robado ami porque ami medesian le boi a po er la puerta nueva i vi que solo la desdoblaron
To fix the cars lol
I had damage on my truck door similar to this. The repair shop didn't pull the dent, they slapped some putty on it and painted, the putty broke out a few months later. I like this guys effort.
Thanks 👍
Haven't seen this for years. Absolutely better than replacing the whole door.
Wrong lmfao a door is a few bolts and switching locks this requires a welder and fabrication skills and paint and a sander
“ absolutely “ 😂
@@HitLeftistsWithHammers what's wrong. I'm a foreigner, no good Americano
@@509shaggy still a big waste of materials right? Replacing a door is at $2000-3000, repainting a door is about $300-400. Only requires a skilled worker.
@RB Zhang lmfao you say it costs 3 to 4 grand to replace a door not true and for 2 that would be through a shop then u say it only costs 400 to take the dent out and repaint but don't add the cost of labor assuming both people do the labor themselves just unbolting a few bolts lining them up plugging in the electronics and then replacing the locks is way easier and cheaper a door is like 70 bucks at pull and save
Pulled so hard he made a massive high spot through the door, right idea wrong execution
So.. good initiative, bad judgement.
😂😂
You have a good eye because I also noticed the high spot he created at the end. Spent 40 years in the business don't ever wanna work on another car again lol
I was about to say the same thing. Pulled a high ridge halfway through the door
Now he just needs a hammer
Dented the entire door not to mention the welds he put on it.
Ok
The original impact was less violent than this!
He's hammering it too hard. Be gentle with thin sheet metal.
コレが〇ッグモーターの工場か‥‥
Are we going to talk about the dent, he actually put in the door…🤷🏻♂️
I believe there is an easier and more convenient way.
Não há.
Yes it's called replacing the door
I love the hustle! Highly Skilled hands great to see theres still beaters around! Knock that high spot down and give it a Skim! Carpal tunnel socks great work mate
Thanks
You can use washers or dent puller pins either way works fine.
It's the most essential clipping.. have never watched a clip which shows how a dent is rectified ❤❤❤
Thanks
As long as it's clean inside and you heat up a few spots red hot about the size of a quarter then apply a saturated cloth of water... you can take any wobble in the panel. ❤
Yeah it's the stretching that baffles people, body fill and form is half of it.
I'd just buy a new door
Not bad idea 💡
I’d rather just pay a few hundred to pull the dent, an paint correct.
@@malachi412 Correct, nothing wrong with this repair
Why, this's cheaper.
@john smith because the cost of the door,R&R, edging R &I door guts and seals and fitting are way more expensive than repairing a square foot bondo , prime and paint
At this point, just leave the car in a junk yard🤣
Give him the right tools and he'd be one of the best
Okay 👍
Pasta ni que nada¡¡¡trabajo limpio y perfecto,este si es un excelente hojalatero¡¡¡APLAUSOS¡¡¡¡¡
La tremenda" costilla" que se le hizo ala puerta cuando la "baje " con el martillo conque cres que va atapar las marcas ?? Y las lineas por fuerza va a tener que esmerilar y aplicar pasta o masilla....sigue aplaudiendo.
문짝을 통째로 교체하는 것 보다, 여러가지로 절약되는 방식이네요.
권장하고 싶군요.
Thanks
Absolutely ruined that panel 🤣🤣🤣
Удаление вмятин без покраски😂
how my braces were installed
Creo que éspeor el remedio que la enfermedad.
Good job! Passionate guy doing his craft! Dont let the comments fool you. You know better thats why you are in that industry! Cheers!
Im in the industry, its smart, but its alot of work. Then he has to grind them off. I replace the whole door in 5 minutes. As a customer it could possibly cost you less to bring me your than this guy
Replacing the door would be easier and smarter!
Good idea 💡💯
I’ve been watching this for about an hour. When is he gonna get that dent out?
No era mas fácil con un imán de neodimio? 😂😂😂😂🤷🏻♂️
Nooo 😂😂😂
Que es neodimio? Gracias
Tell him it’s easier to replace the door but do it long distance
I think he really knows what he's doing , its on the edge of door no way to repair easily. Must be the most economical method and fast. The top part can be pushed back in, that some said for dented from repair, that's easy to do
I do body shop and he actually has a good technique
Thanks
@@mechanicalrestorationsi!pu
you can't do that on this America plastic cars
This is the guy that be scamming people mom at the mechanic 😂
I'll just live with the dent...it adds character.
👍
There is a tool for this it uses copper pins and welds them and then a tool just like he’s using but a different tip and he used way too many washers 😂
The pins are steel, not copper.
My shorts have been foreshadowing a dent in my future
Saingan ketok magic nih 🤭 🤗 🙏
Excelente método. Así ya no hay que desmontar el forro de la pieza. Felicidades.
Нужно будет обработать места сварки с обратной стороны.
Ну или он еще не дошел до этого уровня)))
We used heat gun on our car's dent.. saved a lot of penny in repairs lol
Okay 👍
That second hit on the upper one 💀
There’s a thing called a stud gun. Easy does it.❤
Okay
Good job 👍
Thanks 👍
😊😊😊o
😮😮😢😢😮😮😮😅😅😅😊😊😊😅😊😊😊😊😊😊 BU BU BU BU😮🎉🎉❤❤❤❤
@@josealbuquerque4828 8,
@@josealbuquerque4828 ,
It worked. The dents were popping out back to normal.
Yes
This video has more than 155M views but only 1m likes
That seems like a lot for a dent. When you can replace the whole damn door, would seem easier than welding all those rings on there…. I mean… you do you… ✌️
there's some cars you just can't find parts for and most people don't have the money to buy custom-made parts. you do with what you got
@@ericmcdonald88
Yeah, some cars but, that looked like a newer car. What the hell do I know, I’m more of a, 69’ Nova man myself or a GTO. Anything muscle, anything American… Maybe 44✌️….
Insurance company isn't going to pay for a new door
'Work smarter, not harder' motherfuckers when they never achieve anything in their life because they're lazy sacks of shit:
well just pull inner door panel and push most of that out either manually or get a inner tube from a golf cart inflate.
板金屋さんてスゴいさすが職人!
Removing paints, making several holes and fixing washers to fix car door dents. This person is really genius.🤣🤣🤣
Nice job nice job😊 I've never seen it done that way before but you got a little standing to come up all those welds on them rings but very good
Thanks 👍
É isso aí que chama martelinho de ouro❤❤
Very cool 😎 good work 👍👍👍👍👍
Thanks 👍
Only skilled people can return the car to its original state because it has been distorted
First spot to rust out
Well it’s not good to leave the Dent
Creo que el método tradicional de quitar la puerta es más rápido y con más garantía de buena reparación.
You know taking the door panel off would have been a great start
Theres actually a bit for the slide hammer that holds pins you don’t need to weld washers to your car just need the right too
Amazing mechanical technology I am impressed.
Thanks
참 기술좋아졌네요.
화이팅 ~
Thanks
Not to mention an eagle dent puller does a much better job than welding 20 washers on the panel 🙄
mantap..👍👍👌👌👌
Now that is masterpiece...
A chiropractor for cars
No truer words than this
😂
😁 FUNNY 😂
Très beau travail, c'est bien redresser. Bravo 👍👍👏
Thanks
Very intelligent 🧠
Thanks
muito bom. puxou a parte mais grave o restante vai bem
How are you doing
저 정도면 새차 산다!
REAL BODY WORK, not just replacing your entire door lol
Look at the painted area above when he hits the second part for the second time. He created some new problems.
No dicen que en Estados Unidos botan su auto con un solo simple choque y se compran uno nuevo. Si entran a la página de copart ahí encontrarán esos carros de remate
Vẫn sửa chữa nếu là máy bay.
Es en Canadá 🇨🇦
no es mejor sácale el tPisado de adentro de la puerta y le golpea de adentro quedaría perfecto jaja
😊
t777
ganyan lng pala pag ayos👏👏
👍
❤👍👍👍 very nice job
Thank you very much
If u close your eyes and listen it sounds like he’s shootings a sniper
Cowboy repair man " 1 kg of filler will do the trick " 😅😅
Bo'midi abdirayim bundaqasi man Vakimchiman
Not only is my dent fixed, but now it has piercings like Dennis Rodman
🆗
We use to do many times but we never name the doors car a,,gate”
This is why you hire a licensed professional
There’s no licensing, lol.
If you were a real body tech you know that this man is actually skilled. that stuff is hard to do
@@Ketoswammy😂😂😂
Shhhhh
I love that people in this trade used to be referred to as "panel-beaters"
ремонт деталей и замена их ,это разные вещи.
в данном случае ремонт. технология ремонта приемлема К тому же всё зависит от заказчика и времени
и главное цены.
Sd DDNSKZKZKKZMZKZKZKK HDJJXJ num de mi Amor❤❤
Super
He messed that up even worse😅
Proof you can do anything with the right tools.😊😊
Safety glasses recommended
No OSHA there😂
Finally, Chiropractic for cars
👍
The second pull buckled the top half of the door. Sometimes replacing a part and making 30 percent on it is smarter than butchering a repair
Good idea 👍
So ya welded a bunch of washers on the door and then damaged the door even more by pulling way too hard. Bravo, man.