I absolutely love this! Anything to make you more visible is a "GO" in my book. Would have loved for you to have shown a shot with the D7's fired up as well. I want to scorch retinas when I ride, this checks all the boxes for me! Well done!
People who say it’s too much are not over fifty years old or don’t own a GSA! I stumbled on this video because I need more lights to be able to see at night. I think it is a perfect example of what BMW should do/offer out of the factory.
I really like the pannier lighting. I find on my GSA that looking at its profile in a window reflexion, the bike is dark no matter how much forward light you project. Would love to see the installation in greater detail.
My GSA is fairly similar but without the D4s above as I'm going off-road in areas and I'm afraid of breaking them if I drop it. I also have the Inview system under the seat with the Amplink and the two Cansmarts under the rear seat. I get lots of compliments on the hand guard lights with your mounts for them - I always tell people where to order them from and to definitely check out your UA-cam channel.
Ideas ideas.. I have a 2000 model with 90,000 miles on it, ready to do a major custom work on it and then a Army green with black engine and wheels.Thx for sharing,great job.
Hi, I like your accessories on your bike 👍 ,just wanted to know that whar is the light you used for handle bar for signal ? Can you say the exact name of it. Thanks
Bike is with customer now. In Scotland. Won’t be seeing it again. The challenge is to make it neat as possible. Doesn’t have to look amazing but get rid of as much excess as possible then duck tape it down so it doesn’t get in the way when using pannier luggage bags. Also used perfect sized grommets to make seal on wire as water tight as possible.
@@ABIKETHING have you any tips on keeping rust or stop the coating on the spokes from staining the alloy. I've seen some clear heat shrink like wrapping on them before
I like it. GSA is an ideal object to put a tons of accessories on it and never is enough. Smaller bikes would look strange with to much lights, but not GSA. I would do the same with my 1200 GSA, if I could find someone to install all these lights. So I have to be satisfied with original fog lights and additional D4 and sound bomb, which were installed by official BMW dealer. But O.K., I found some other options to make my bike more impressive……
Would be interested in more info on your pannier wiring solution - which plugs did you use and how did you sort cable management inside the cases? Great job..! 🎄👍
I used 4 pin MT style plugs. Drilled the necessary holes and then used rubber grommets where the harnesses pass through. Also used high quality heat shrink so the external plugs are extra weather proof. Wires inside panniers are made to measure inside and then duck taped to inside wall.
Craftsmanship top! One can argue about taste ... I think the motorcycle now looks a bit like a fairground carousel ... But, as I said, if the customer likes it, everything is fine!
Wow with that coming towards you on a dark night you might think it was an alien invasion, I do never the less like to be seen, though that is a little over done for my taste, but each to his own as they say. You have done a splendid job I have To say, you must have piggy backed two Hex easy cans for that lot I would imagine. You must have the patience of a saint..
Variety is the spice of life !!! Great vid. PS. I'm hanging out for the CanSmart for the Africe Twin !! I have the Denali DMs thru you, but turns out the switch eliminator needs 12v signal and due to LED lighting on the AT the signal is only 5v.
Awesome job and each their own, would be a bit much for me. Maybe the owner rides a lot at night in the country and felt the needs to replicate daylight.
Hello Mate from New York New subscriber here Love your channel I’ll be taking delivery of a 2021 BMW R1250 GS standard Triple black, low suspension, spoked wheels, fully equipped. I would greatly appreciate your advice & recommendations regarding engine crash bars & auxiliary lighting I am considering Altrider crash bars in black or triple black. What’s your opinion? What crash bars did you go with and why ? I would like to add bright LED lights also What’s your recommendation please Wish I was on your side of the pond I’d have you hook up my bike 👍 Thank You
Good job overall, while you didn't mention an extra generator load with all of this add ons. Have you calculated total AMPs added? Just curious if generator will last long enough with an extra large amount of light.
wow...over the top but great work! i don't ride at night but love the front turn signals and integrated hand guard light. Do you have info on where i can get the turn signals for my 2012 GSA?
I sell all these items. Click on link in description and it’ll take you to the shopping basket with all these products in it. You’ll see the turn signals in that basket.
Some thing like that. I remember filming this and there was an interruption every 5 minutes. Hard to get these videos made with the concentration they deserve.
The first 50% of the video is your face. Nothing against it but after 3seconds we have enough. Great video, informative. More bike less face my only critique. Cheers.
I absolutely love this! Anything to make you more visible is a "GO" in my book. Would have loved for you to have shown a shot with the D7's fired up as well. I want to scorch retinas when I ride, this checks all the boxes for me! Well done!
He’s ready to hunt down zombies 🧟 now 😂👍
People who say it’s too much are not over fifty years old or don’t own a GSA! I stumbled on this video because I need more lights to be able to see at night. I think it is a perfect example of what BMW should do/offer out of the factory.
Absolutely love it! If you are a Super Slab mile muncher or a daily commuter this is a great package. Nicely done. You have skills Mate.
I really like the pannier lighting. I find on my GSA that looking at its profile in a window reflexion, the bike is dark no matter how much forward light you project.
Would love to see the installation in greater detail.
Great job Steve and well done !
Customer satisfaction and this is what is all about!
My GSA is fairly similar but without the D4s above as I'm going off-road in areas and I'm afraid of breaking them if I drop it. I also have the Inview system under the seat with the Amplink and the two Cansmarts under the rear seat. I get lots of compliments on the hand guard lights with your mounts for them - I always tell people where to order them from and to definitely check out your UA-cam channel.
Would've loved to see it lit up at night to get the full affect. Great Job
Ideas ideas.. I have a 2000 model with 90,000 miles on it, ready to do a major custom work on it and then a Army green with black engine and wheels.Thx for sharing,great job.
People are going to think a train is coming down the road.. Crazy good
Not for me, but a perfect executed job. Customer is happy is all good!
Very neat but good luck with the MOT when it’s due.
Hey plz make a video about wiring of all this products.
I’ve made dozens already. Check my channel out
@@ABIKETHING thanks buddy.
@@ABIKETHING btw can i install clearwater light throught denali can smart?
Excellent job, I love what you've done (camera and lights)!
Hi, I like your accessories on your bike 👍 ,just wanted to know that whar is the light you used for handle bar for signal ? Can you say the exact name of it. Thanks
Can you show us the inside of the boxes and how the wiring is tied up, just so I can imagine what space is left to put luggage in
Bike is with customer now. In Scotland. Won’t be seeing it again. The challenge is to make it neat as possible. Doesn’t have to look amazing but get rid of as much excess as possible then duck tape it down so it doesn’t get in the way when using pannier luggage bags. Also used perfect sized grommets to make seal on wire as water tight as possible.
@@ABIKETHING have you any tips on keeping rust or stop the coating on the spokes from staining the alloy. I've seen some clear heat shrink like wrapping on them before
I know we don't get much sun in Scotland but its not that bad
Well done!!!! I would go with this light combo as well if i could afford it.
At the end of the day it's all about being seen, seen is safe !!
I've been wanting to add turn and brake lights to my Givi top box. Be interested in seeing how you wired the panniers if you recorded it.
Ping me a direct email and I’ll send you info and products required to make this happen
It's a little overkill but it does show what you can accomplish with lighting. Plus I'd like to know where you got that tan?
Amazing, prefect in every way.
And the oscar goeeeess Goldwing GS 1250 ADV..👏👏👏👏
I like it. GSA is an ideal object to put a tons of accessories on it and never is enough. Smaller bikes would look strange with to much lights, but not GSA. I would do the same with my 1200 GSA, if I could find someone to install all these lights. So I have to be satisfied with original fog lights and additional D4 and sound bomb, which were installed by official BMW dealer. But O.K., I found some other options to make my bike more impressive……
Would be interested in more info on your pannier wiring solution - which plugs did you use and how did you sort cable management inside the cases? Great job..! 🎄👍
I used 4 pin MT style plugs. Drilled the necessary holes and then used rubber grommets where the harnesses pass through. Also used high quality heat shrink so the external plugs are extra weather proof. Wires inside panniers are made to measure inside and then duck taped to inside wall.
Another great video Steve, see you at the NEC.
Yes, I need more lights on my R1250RT, pls
Gorgeous bike! Love your workmanship. Overkill? Yes IMHO! But as the saying goes "the customer is always right".
Great to see the workmanship and what you can do 👍🏻
I’d be interested in knowing how the hexcans are programmed.
That's an awesome bike !
I think I would have a love hate relationship with the bike if I had those lights on mine 😂 I'd love it at night but hate it during the day
Looks fantastic.
Craftsmanship top! One can argue about taste ... I think the motorcycle now looks a bit like a fairground carousel ... But, as I said, if the customer likes it, everything is fine!
Holy smoke it's not me but
Each to there own looks nuts....love the work you do sometimes so I will take my new 1250 gs to you from Ireland...
Think I'll see him from Dublin 😁
🤣🤣
Surely at some point the alternator is going to choke with all this extra current draw?
Cameras are in the perfect locations i wish to make similar on my G650GS, lights ok but way to many imho
Where there is no extravagance, there is no love…….who doesn’t love their GS😍.
Einfach wunderschön und Super gemacht.
Hey there, great videos! Really well done! I’m hoping you could do a 2021 R 1250 RT.
Wow with that coming towards you on a dark night you might think it was an alien invasion, I do never the less like to be seen, though that is a little over done for my taste, but each to his own as they say. You have done a splendid job I have
To say, you must have piggy backed two Hex easy cans for that lot I would imagine. You must have the patience of a saint..
All he needs to do is just put ornaments. Christmas all year round lol
Those D4s are going to brake first time he drops the bike while attacking an incline and it ends up wheels up.
Too much is too much. However, innov3 placement is just perfect 👍
How often he changed his starter alternator on this bike I'm sure poor alternater works at 120% load and burnt quite often
Moving Christmas tree 🎄. It will reduce battery lifetime is it ?
It really wont
@@ABIKETHING cool 😎
All the way from Scotland you say? I'm still trying to figure out how to ship you a bike over from Ohio!
As you said, not quite my cup of. But what a job well done! All neat and tidy! :)
Love it....I am saving!!
Pure awesomeness!!!
Variety is the spice of life !!! Great vid. PS. I'm hanging out for the CanSmart for the Africe Twin !! I have the Denali DMs thru you, but turns out the switch eliminator needs 12v signal and due to LED lighting on the AT the signal is only 5v.
to each his own, but thats an insane amount of lights.,
Someone is obsessed with lights I would say 😜
Hey Steve, Great video, content & narration as usual 👍…. As for the bike a little bit OTT for my liking, but great work on your part 👍
Awesome job and each their own, would be a bit much for me. Maybe the owner rides a lot at night in the country and felt the needs to replicate daylight.
Wow, nice. Who does this in the US in the northeast
Sorry sir like a Christmas tree!
Che 🌳albero di natale 🎄🎅. Una cafonata!
As Clarkson would say, 'It looks like a council house at Christmas
I can't see the link to buy this
Reason for all those UFO sightings in the uk . All GS owners going nuts with their lights
Awesome work done 👍 👌 . But doesn't the stock battery get cooked up with so much load on it?
No. As long as you have the engine running
would you ever do kits for 850GS's?!
Yes. I have been for the last 2 years. They’re on the website
Amazing 💎
Love it!
What’s the available watts on the GSA for accessories?
Hello Mate from New York
New subscriber here
Love your channel
I’ll be taking delivery of a 2021 BMW R1250 GS standard
Triple black, low suspension, spoked wheels, fully equipped.
I would greatly appreciate your advice & recommendations regarding engine crash bars & auxiliary lighting
I am considering Altrider crash bars in black or triple black. What’s your opinion?
What crash bars did you go with and why ?
I would like to add bright LED lights also
What’s your recommendation please
Wish I was on your side of the pond I’d have you hook up my bike 👍
Thank You
Didn’t know you can use TWO Hex Ez-cans on one motorcycle. Wonder where the second one connects (harnesses) to the electronics of the bike ?
Wonder no more. Look through my UA-cam videos and you’ll find lots of videos on this subject over the past 2 years
I just installed D7s
Good job overall, while you didn't mention an extra generator load with all of this add ons. Have you calculated total AMPs added? Just curious if generator will last long enough with an extra large amount of light.
The gas generator is in the pizza box.
N😊w that's my cuppa for sures ❤
Ewwww ! Only thing missing is the Scania 580 badge ! Too much . Would like to see a vid from the customer at some point during a night ride .
Clean installation. A bit much, though.
When are you going to show us a variety of installations of the Denali Dialdim? Waiting patiently.
wow...over the top but great work! i don't ride at night but love the front turn signals and integrated hand guard light. Do you have info on where i can get the turn signals for my 2012 GSA?
I sell all these items. Click on link in description and it’ll take you to the shopping basket with all these products in it. You’ll see the turn signals in that basket.
@@ABIKETHING thx for your reply. I don't find turn signals or my bike, 2012 R1200GS on your website:(
@@rogermeyer860 Non LC models www.abikething.com/shop/?filter_bike=non-lc-bmw-2004-2014
What is the cost for same spec supply fit
fantastic
Customers name?
Santa McClause?! 🤣😂
The art of maybe it needs more aux lights
What is tank protector you used?
No idea. It’s not my bike
Money no object I would have most of this 👍.
Might have let us see the ‘full monty’ main beam!! Scared you’d blind us all and get sued? 🤣🤣
Some thing like that. I remember filming this and there was an interruption every 5 minutes. Hard to get these videos made with the concentration they deserve.
Replace lights with missiles and mini guns and you got an apache motorcycle
Customer must have been a Mod in his youth. He just needs a load of mirrors now ! :)
No chance of him missing Starbucks at night!!!! Great job though 👍
watch Pol Tarres or Toni Bou show what actually can be done with a heavy bike.
Wish you were in the states to do this to my bike?
What part of USA?
@@ABIKETHING Spokane in Washington State
To much for the front, the D7 are enough. The back looks good.
Madness
You are free to do what you like on your bike, but all those lights are just stupidly ridiculous
Dream bike me gs 1250 bmw❤️
I need to up my game lol 🎅
Love it
I ride with a single halogene h4 lamp headlight as opposed to this giant:)))
think its a gs thing!
Is that a motorcycle or a pimped out Christmas tree? ;0
The first 50% of the video is your face. Nothing against it but after 3seconds we have enough. Great video, informative. More bike less face my only critique. Cheers.
A BMW Goldwing
Si se esfuerza todavía puede encontrar sitio para poner otras 10 o 15 luces más🤦🏻♂️
But good job.