Precor P82 P80 P62 Console club & maintenance mode login procedures.
Вставка
- Опубліковано 4 чер 2021
- This video will show you how to get into the back end club or maintenance mode settings on the P62 small screen black plastic around screen, P82 large screen black plastic around screen, P80 large screen grey plastic around screen (P80 console was discontinued around 2015)
- Навчання та стиль
Hey I got an old P80 still working fantastic thanks for showing me how to get to maintenance mode I need to get someone to service it now after 3500 km. Brilliant video thank you 🙏
Awesome mate !… great tutorial.. thanks a bunch.
Thanks for trying to help, but slow down when providing the codes. It’s impossible to get them because you blurt them out so fast, no pause, and kind of mumbling.
Showing 3 Rectangle Boxes .
I bought a p80 machine for my home gym, but the left hand step adjustment buttons don’t seem to do anything. Will have a look in service mode to see if I can check they are working.
If the left stride toggle isn't working, check the 12 volt 5Ah battery. If the battery is flat or under 12 volts, incline won't work. Maybe it's the toggle switch not working, but I would bet it's the battery.
Hi Ben. I finally managed to get round to getting the covers off(what a pain!) and have checked the battery, it’s a fine and healthy 12.65v unplugged from the machine. It actually looks recently replaced. So it’s not that. I’m
Now trying to get the screen unit apart to check the switch for the incline. Any tips greatly appreciated :-)
Hi Ben I have a p80 console and I'm unable to get into the back end with that code. Are there any other codes or work arounds?
If you have tried getting into the backend correctly on P80by pressing & holding pause, the press channel up, volume down, volume up, channel down, then keyboard should come up, maybe one of these buttons aren't working, you can buy the sticker with keypad overlay replacing buttons
Hey Ben I have a P80 and we had the power go out the other day. Now my screen says Temporarily Unavailable Please you another machine. I can get into the backend settings but once I back out it just goes back to the temporarily unavailable screen. Not sure what to do. Can’t seem to find anything online. Any help would be greatly appreciated
Hi Mate, sorry to say 98% of the time, you will need new Console, the P80 console stops production 8 years ago & is un-supportrd by Precor, you can upgrade to the new P82 15" screen Console or P62 10" screen or LED just numbers & programs, no tv
@@BenHudspith ok thank you. I’ll probably go with the P82 then. We have a Precor AMT 885. Have had it about 3yrs but never hooked it up to the internet so never watched tv on it or anything but I know the wife will want the same display. Do you have a recommendation for the best place to buy from?
Hi Ben I have a p80 console and your method to get into the program mode is not working. Any suggestions?
Hi Terry, check that your Pause, both channel & both vol7me buttons are working, you can start the treadmill & press Pause to check the treadmill stops, also go to channel & check the channel up & down buttons are working, if one of these buttons aren't responding, you can't get into the back end
P80 console maintenance mode is: press & hold Pause button then press channel up, volume down, volume up, channel down, then the keyboard should come up
Sir .my tradmill Display is stuck. I want that problem solve. If you can help me
You will need to follow the steps in the stuck key video to determine the faulty part or circuit board, then order the part from your countries local supplier
Hi. ... I've got a problem with one of these..... Keeps saying reset stop button .... Can you help
There are 2x limit switch/reed switch inside stop button, check they are working with multimeter, if not, could be cumms cable RJ45 conne tor, clean with contact cleaner/isopropal alcohol
Sir i start the tridmill and showing the error please reset triedmill
Plz tell me how to reset
I th8nk that's related to Safety Stop switch faulty or grey colour comms cable faulty from console to lower circuit board.
I have a P80 that won't start. When I press start it goes into countdown and after 1 second just goes back to the main screen. Any ideas? 🙏🙏
Hi Mate, check software should be 7.2.3 for P80, if treadmill check & clean wire connections for stop button & comms cable from console to lower circuit board.
@@BenHudspith do you have instructions on how to update software?
@chrissirovyak2309 best way to update software is to register machine on Preva, this is free & the console will update overnight through internet, contact your countries precor distributor to register
@chrissirovyak2309 register machine on Preva, its free & the console will update overnight
@@BenHudspith connect machine via ethernet? These don't have wifi
... Pause and channel buttons are working
Are you saying the Pause & Channel buttons aren't working to get into maintenance mode? Check if buttons working when using machine with quickstart
How are you
The workout button is not working
Try turn8ng off power for a full 5min then startup again to test, try screen calibration, check software P80 should be 7.2.3 & P82 should be 8.2.4
Hello
P82 model
Es 🗑 ya lo hice y no funciona dan hasco