I'm 58, and I've never paid more than 600.00 for any guitar, even in the 80s. The Gibson line is way over priced and is priced for labor and not parts. Pots, and wire, and etc are no bearing on tone. I have squires that I've gigged with for over 30 years, and it pays bills. You must know how to set up a neck and pups. I never wanted to sound like anyone and just play songs and I've never been interested in learning every note of solos, but I also play country and most of it came in time with practice. It's cool you do this. It's exactly what anyone can do with time and patience, and education
One Reason why Gibson's are more expensive,is #1 the name, and back in the day they were all handcrafted. Also Gibson did all the research and development, what's less expensive guitars all they had to do is copy it they did not have to invent it. I'm like you, as far as being older also,, I'm 67 now,,started playing in 1967, at age of 10. My first Gibson was a Gibson SG standard P-90s,$149.99. then my next Gibson was a ES -125 that was also under $200. Gibson Les Paul, cost,$285.99. still have my Gibson's but now,, there's so many good Gibson based Guitars like PRS, etc. would you buy cheaper because they did not do the research and development.. now,,,I'm mostly a fender guy..
Just once in life.. A guitar player should own a gibson les paul.. Even if it is just for a month or two... It may seem like a lot of money but in 5 or 10 years you will still have that money if you decide to sell... Its like a Rolex.. You actually get to own the product for free whilst you own it. On the other hand you can keep it and be proud that you bought what the other guitars can only copy.
@@jimkostan9932Gibson has mostly used machines to make their guitars for decades now though. Literally paying for the name on the headstock that just broke off
A hard yes to more vids like this. This is pretty much the direction I'm heading in. Where, if the neck and body have that feel MOJO, I pick it up and do work on the electronics and hardware myself.
yes! basically what I'm looking to do! My neighbor gave me a guitar he was going to donate to Goodwill. its a 1998 Korean made Epiphone LP. turns out its a great guitar! i got it working again, new locking tuners, new pickup switch, new knobs, Seymour Duncan on the bridge. Now I want to finish the whole thing! new electronics (that solderless kit is what I need!) new bridge, nut, and perhaps new pickups (or just a neck pickup to go with the JB) great video!
I did something very similar. I bought one of the Epiphone 1959 Les Paul Standard Electric Guitar's. Like you, I'm not a big fan of the Burstbucker pups, so I bought a set of the Custombucker's from a R9 and slapped those puppies in and polished the top... OMG, what a difference those pups made in tone and the polish just makes the flame top jump out. Basically, because of the specs on this model... I have a R9 at 1/4 of the price of the Gibson equivalent. I absolutely love it and find myself playing it more than I do my Gibson's.
I've got one of these as my number 1 rig, awhile back a buddy of mine got a mid 80's sg that was pretty totalled on the neck so he let me strip it for parts, took everything down to the thumb bleeders, has the og gibson pickup in the neck but recently put a jb-4 in the bridge. Absolutely love it!
I bought a headless Harley benton . Ended up buy a bunch of different tools .fret files, level beam, nut files. After several hundred dollars and wrecking then replacing things I'm fairly confident I can do whatever now. After all that and finding some used Seymour Duncan's distortion and all new wiring it's still a dump but a hell of a lot better lol
I have a set of the Gibson Custombuckers in my new Epi IBGC 59 Les Paul, best pickups I've ever played. People said that since they aren't wax potted, they would squeal under high-gain, but I'm not getting any of that. They just sound killer. I'm gonna pull them out and put them in my Gibson LP Custom. Great video!
I see that the switch is on the fret pick up position while playing in the track. Is that correct? Do you play rhythm with the fret pick up? Or is the switch actually on the bridge position but turned upside down? Just curious ☺️ great content!
The solderless system would be amazing for me. Not that I'm afraid of soldering but I have a neurological condition called tremors where my hands shake constantly which makes soldering extremely difficult if not impossible
I also have issues with soldering these days, because the eyes aren't what they used to be. Used to do that all day, but not without a lot of magnification these days.
Dude I’m so sorry that happened . I have enjoyed watching your channel over the past year and your great attitude is refreshing on UA-cam. Hate it for you but they will make things right. Whoever you bought it from.
First time commenting. Kyle love this kind of content. I've been wanting to get back into guitar restoration. But it's feeling a bit daunting. Your very concise and make this seem not so over whelming. It's amazing the difference u made in thay gorgous epi.
All of your videos are cool, but really enjoyed this one. I’m getting a VOS ‘57 Goldtop and I was in the process of going down a rabbit hole about Custombuckers, when I stumbled on this video, keep up the good work bro!
Thanks for the video, the idea of using a car polisher hadn't occurred to me. I need to take some scratches off a headstock, that could work. BTW, your soldering iron appears to have a blue sponge (can't quite tell, but at 17:10) on the stand. You don't want to use a wet sponge while soldering. I know, it's how I was taught too, but it cools the iron off and oxidizes it. Get a brass soldering cleaner, looks like a brillo pad, and it will clean off the iron and not cool it down. Unless of course you aren't using a wet sponge, then ignore me!
I always luv redoing Guitars. For the last 8 years I've been making Dean ML style Guitars. I typically use Ibanez RG style Guitars for parts. Like necks. Body core pickup routes. Neck pocket position and trem position.. although I set my necks in and use actual Floyd Rose trems. I cut down along each side of the pickup routes. And build layers to build my own 25.5" scale .. 24 fret. ML style Guitars.. I have about 7 of them. Or more? Like 3 or 4 Stealth Style ML Builds too.. so I luv seeing anyone do their own work. Learning to make guitar major reconditioning and modifications a hobby....
Hi Kyle, I never post comments for some reason but this video fired me up. Please make more stuff like this 🙏🏻 It is great to watch someone not that professional doing projects like this. It is encouraging! 💪🏻
Hey Kyle, I see you went to MOJO. My brother is the VP over there. Its a good company. They make some great products. Enjoy the show! Never miss an episode!
Remember to angle that nut file towards the headstock in the same angle the string would. Makes the string move smoother and allows it to contact all the way on the slot thus not messing up your intonation.
I put a graphtec rezomax bridge on my e2 and i have been in love with it ever since. I have been surprised that they don't get more love. Nice build Kyle!
Im loving the Dadarrio Planet Waves tuners the best after getting a set installed already on a used EC401. They cut themselves after u lock and start tuning the string tight. I also own Grover kidney bean lockers and 2 sets Hipshot open gear lockers.
Wanted to mention the Planet Waves as well. I have them on an Epiphone Explorer and they are fabulous. That string cutting feature is the cherry on top.
hey Kyle about 3 years ago i bought a guitar it’s a copy a very well made copy of a les paul and i didn’t realize that the mojotone wireless harness came with this guitar i was always wondering why it would always sound so good like your guitars this one has become kind of my favorite it has a big neck no inlays an ebony fretboard which i love it’s all black in color with white binding and most of all it’s heavy i love them heavy thank you for your video of the upgrades for your epiphone
Dude, I swear 9 month ago I did almost the same thing to a semi-hollow Gretsch, same bridge, tuners, nut. The only difference is that i went for BKP P90s. Such a fun project, and now the guitar sounds and feels amazing.
Love to see more content like this!! Maybe as a suggestion if it hasn’t been done already.. speaker swaps and understanding your amp ohms to your speaker cab ohms.
Looks great! I would totally polish the back. I would always change the pickups on an Epiphone, I'm not a fan of them but I do like the Gibson Burst buckers. I think pickups are a personal choice, some people hear & feel the difference others don't. Excellent work!
17:00 just a little tip. Use some S-39 or Flux and fresh solder when trying to reheat an old solder joint. This helps to bring oxigen into the reaction which helps. The potentiometer is quitte good at dissipating the heat and it can withstand quitte high temperatures before your solder melts when using just the iron.
I've got an Epi SG with all Gibson hardware on it. It's an absolute demon. Only cost me around 500 all the hardware came for free when a guitarist smashed his guitar on stage and signed it and gave it too me.
Oh my god you were killing me with the nut file. You know nomad has an excellent video on how to setup a les Paul I really hope you watched it But guitar very cool I’ve been wanting to do the same with my les Paul junior from epiphone
First time watching your channel. I did not expect that great of a result, nor that impressive of a demo! Thanks for demoing the guitar in more then one way with the direct input sound and then the sound in the room. I wish more people would do that. Subscribed!
Kyle you did a very good job restoring that Epi. I LOVE seeing videos of folks fixing a guitar that some one "goobered" up. I've got a Kramer tele thats in pieces right now I wanna fix up one day and hopefully I'll get the money and time to.
I got one of those Mojo Tone LP wiring harnesses for a similar project and couldn't get it to work, I even chatted with a tech rep from the company. He said something was probably unintentionally grounded, it still doesn't work but it is quite possible I am just stupid lol. Keep experimenting with your content, good work.
That turned out sweet those ratio tuners set that headstock off, but I already kinda like the old epiphone headstock shape on the customs the custom inlay and binding make it look classy and the shape of the ratios knobs or keys look awesome on it It looks good and sounds good. Now I want to find a neglected epiphone LP custom to pimp out.
This has to be one of top 3 favorite vids of yours buddy! Just did a restore on a '99 Ibanez AX-7521 Cherry Fudge 7-string, was almost a month of little headaches here and there but that guitar is the best sounding on my rack now lol definitely make more vids like this if you get the chance
i got the same project. I just bought a (April 2024 made) Epiphone SG limited edition Special 1 in cherry. Not a fan of the bridge setup but time will tell. All i have done is put some slinkys on and ordered some black chrome grover tuners.
Killer content. Would love to see you do more of these "zero to hero" kind of vlog/build videos. I think content like this would definitely be a huge help in terms of channel growth. A lot of people love shit like this, myself included. I'd rather poke around and find a killer deal on an older guitar that needs a little TLC, then drop $1500+ on something new these days.
That's such a sick lookin guitar! I've recently decided to start trying to do my own setups, mods, etc. and it's videos like this that make it seem alot easier to jump into when you're not super handy or mechanically inclined. thanks!
That was a fantastic video, and you did a great job on that restoration/upgrade. Please make more videos like this. Very entertaining and knowledgeable stuff. Keep it up 🤘
I agree, regardless of what anyone says, I believe pickups can make or break a guitar as well. I've changed many pups in many guitars and have experienced it myself.
Did you flip the toggle switch positions? Didn't sound like you were using your neck pickup so i can only assume you have the bridge in the up position
Great work brotha. I am really gonna have to get me one of those mojo tone harnesses. I don't solder very well. I do enough to get by, but yeah, that harness is the berries man.
That guitar looks amazing! The only small thing that I would change is the switch tip. I think that a black one, like the original, will fit so much better than this orange one. But still a very hot guitar, dude!
Hey Kyle, what a great journey you took us on with this video. The guitar was definitely worth putting some time and money into. It turned out really good. Thanks for putting the time into making this for the channel. Keep up the excellent work! Look forward to seeing more cool videos from ya. Cheers from Texas.
Great video! I modded my shecter with the same bridge and tuners. They are just great. I agree pickups make a huge difference. I put a set of Bare Knuckle polymath in my LP. Sounds killer. They replaced a set of Tim Shaws which where great. But they sound clearer and way more dynamic.
You must upgrade Epiphone Slash to next level…. sounds Gibson Slash!!!!! The community want this video and a battle this Epiphone Slash Upgrade VS Gibson Slash!!!!!!! 👏🏻
It’s great! I feel like this video really highlights the difference between woods in epiphones and gibsons Albeit you used a couple of specific/individual pickups for your desired tones I feel like stock gibsons are just bread and buttttterrrrrr
Have an epi. L.p. 100 lefty ... worked on it .plays way above it's pay grade! It's hard to find Lefty's for a good deal so it was a score. Cool video bro,subd.
Nice job! I’d like to see more of this. I rescued a super neglected 08 MIJ Jackson DK2 with a blue flame maple top last summer and am thrilled with how it turned out. I’m not exaggerating when I say it was DISGUSTING with shit I don’t even want to know what it was, but it cleaned up amazing. Felt great to do because it was in such awful shape and now is being shredded properly after being brought back to its former glory.
Nice ... Its cool to see pickup wiring going easy especially for someone like me that has the worst soldering skills in the universe. Sounds great btw.. I'd love to have that PRS amp you got behind you...
Being that I love to work on guitars, probably a little more than playing them, I’d love to see more of this type of video from you. Great job! Looks killer and sounds awesome!
Josh middleton also rocked a silverburst ESP for a long time, so it all came together! Great guitar, great video, great playing, loved everything about this
Which compound did you use for polishing? Awesome video Kyle, love your content. You deserve to be up there with the foremost respected and popular guitar UA-camrs.
Just the Meg's Ultimate Compound that you buy at Wal Mart. If I run into something like this again, I will def order something with a little more cut to it
No, I actually had the pickups in backwards in the harness but was on a bit of a time crunch when filming so just left it like that for the time being, haha.
Sweetwater is incredible and your videos really affirm that. I've tried to order from them many times to support such a great store and unfortunately can't, being in Canada. We don't have a comparable in Ontario. Also, I have always just wrapped some finer grit sandpaper around the string gauge I want to file the nut slot. Works great for me that way. Those files would be good for blanks though!
Great video!! I did the same with my Les Paul copy that I bought in 1986. I used EMG plug and play pickups. So so easy!! Keep doing what you’re doing 🤘🏻😎🤘🏻by the way I think you have just a little more room for another amp on that wall
Awesome video bro. I just bought a budget Ibanez I’ve been thinking about doing the same thing with. I would love to see more videos like this in the future.
Sweetwater is the shiznit! The last purchase I made with them was a bag of picks. Afterwards they call, (like always) to see if I'm happy, or if there's anything they can do....FOR A BAG OF PICKS PEOPLE! A BAG OF PICKS....Yeah!
People who save abandoned animals and restore cars, guitars, airplanes, and homes deserve a very special place in heaven.
I'm picking up a rescue German Shepherd puppy this weekend!
@@belligerentamateur how is the puppy?
Really?
Yes we do but we get to keep our guitars, cars and animals 😉
My ego has never been so stroked. 😂 JK.
I'm 58, and I've never paid more than 600.00 for any guitar, even in the 80s. The Gibson line is way over priced and is priced for labor and not parts. Pots, and wire, and etc are no bearing on tone. I have squires that I've gigged with for over 30 years, and it pays bills. You must know how to set up a neck and pups. I never wanted to sound like anyone and just play songs and I've never been interested in learning every note of solos, but I also play country and most of it came in time with practice. It's cool you do this. It's exactly what anyone can do with time and patience, and education
One Reason why Gibson's are more expensive,is #1 the name, and back in the day they were all handcrafted. Also Gibson did all the research and development, what's less expensive guitars all they had to do is copy it they did not have to invent it. I'm like you, as far as being older also,, I'm 67 now,,started playing in 1967, at age of 10. My first Gibson was a Gibson SG standard P-90s,$149.99. then my next Gibson was a ES -125 that was also under $200. Gibson Les Paul, cost,$285.99. still have my Gibson's but now,, there's so many good Gibson based Guitars like PRS, etc. would you buy cheaper because they did not do the research and development.. now,,,I'm mostly a fender guy..
Just once in life.. A guitar player should own a gibson les paul.. Even if it is just for a month or two... It may seem like a lot of money but in 5 or 10 years you will still have that money if you decide to sell... Its like a Rolex.. You actually get to own the product for free whilst you own it. On the other hand you can keep it and be proud that you bought what the other guitars can only copy.
@@pauljohnson3686 unless the headstock will break like on many of them :D
@@dokkenmokken6278 If it does... Get it repaired... Life's to short to worry about trivial things like a broken headstock... Just my own opinion.
@@jimkostan9932Gibson has mostly used machines to make their guitars for decades now though. Literally paying for the name on the headstock that just broke off
My husband used dowels to pluged bridge holes on this Epy. This had real bad dicast had casting lines so he put all Gibson everything . Thank you.
The guitar turned out amazing, I’d definitely want to see more content like that
A hard yes to more vids like this. This is pretty much the direction I'm heading in. Where, if the neck and body have that feel MOJO, I pick it up and do work on the electronics and hardware myself.
24:40 ..whe you saw the strring slots, dont forget to angle it down and into the direction of the actual string..
yes! basically what I'm looking to do! My neighbor gave me a guitar he was going to donate to Goodwill. its a 1998 Korean made Epiphone LP. turns out its a great guitar! i got it working again, new locking tuners, new pickup switch, new knobs, Seymour Duncan on the bridge. Now I want to finish the whole thing! new electronics (that solderless kit is what I need!) new bridge, nut, and perhaps new pickups (or just a neck pickup to go with the JB) great video!
ohhhh yes this is a beggining of a great series ... give us more guitar projects
I did something very similar. I bought one of the Epiphone 1959 Les Paul Standard Electric Guitar's. Like you, I'm not a big fan of the Burstbucker pups, so I bought a set of the Custombucker's from a R9 and slapped those puppies in and polished the top... OMG, what a difference those pups made in tone and the polish just makes the flame top jump out. Basically, because of the specs on this model... I have a R9 at 1/4 of the price of the Gibson equivalent. I absolutely love it and find myself playing it more than I do my Gibson's.
I buffed the flat finish on a prophecy to gloss and it made the guitar look 100x better. I had to sand it like this to do that.
Good job polishing that thing!
Sounds Fantastic ! tip on the finish if you wet sand ending with like 2000 grit polishing will be sooo easy.
AS a retired guitar tech for a major guitar chain i must say Kyle knows his shit ! great choice of parts and where to put the dough !
on the pick up subject i whole heartedly agree! for me im a die hard for either Seymour Duncan Black winter sets and the Nazgul Sentient sets
I've got one of these as my number 1 rig, awhile back a buddy of mine got a mid 80's sg that was pretty totalled on the neck so he let me strip it for parts, took everything down to the thumb bleeders, has the og gibson pickup in the neck but recently put a jb-4 in the bridge. Absolutely love it!
I bought a headless Harley benton . Ended up buy a bunch of different tools .fret files, level beam, nut files. After several hundred dollars and wrecking then replacing things I'm fairly confident I can do whatever now. After all that and finding some used Seymour Duncan's distortion and all new wiring it's still a dump but a hell of a lot better lol
I have a set of the Gibson Custombuckers in my new Epi IBGC 59 Les Paul, best pickups I've ever played. People said that since they aren't wax potted, they would squeal under high-gain, but I'm not getting any of that. They just sound killer. I'm gonna pull them out and put them in my Gibson LP Custom.
Great video!
I see that the switch is on the fret pick up position while playing in the track. Is that correct? Do you play rhythm with the fret pick up? Or is the switch actually on the bridge position but turned upside down? Just curious ☺️ great content!
Guitar Mods and Upgrades are what excites me. There's too many ppl arguing over tone, mixing and amps already.
Awesome video, I dig these upgrade videos, because I as well love this part of being a guitar player, by the way those pickups sound incredible!
Thank you!! Glad to hear it!
The solderless system would be amazing for me. Not that I'm afraid of soldering but I have a neurological condition called tremors where my hands shake constantly which makes soldering extremely difficult if not impossible
I also have issues with soldering these days, because the eyes aren't what they used to be. Used to do that all day, but not without a lot of magnification these days.
Dude I’m so sorry that happened . I have enjoyed watching your channel over the past year and your great attitude is refreshing on UA-cam. Hate it for you but they will make things right. Whoever you bought it from.
First time commenting. Kyle love this kind of content. I've been wanting to get back into guitar restoration. But it's feeling a bit daunting. Your very concise and make this seem not so over whelming. It's amazing the difference u made in thay gorgous epi.
All of your videos are cool, but really enjoyed this one. I’m getting a VOS ‘57 Goldtop and I was in the process of going down a rabbit hole about Custombuckers, when I stumbled on this video, keep up the good work bro!
Thanks for the video, the idea of using a car polisher hadn't occurred to me. I need to take some scratches off a headstock, that could work.
BTW, your soldering iron appears to have a blue sponge (can't quite tell, but at 17:10) on the stand. You don't want to use a wet sponge while soldering. I know, it's how I was taught too, but it cools the iron off and oxidizes it. Get a brass soldering cleaner, looks like a brillo pad, and it will clean off the iron and not cool it down. Unless of course you aren't using a wet sponge, then ignore me!
I always luv redoing Guitars. For the last 8 years I've been making Dean ML style Guitars. I typically use Ibanez RG style Guitars for parts. Like necks. Body core pickup routes. Neck pocket position and trem position.. although I set my necks in and use actual Floyd Rose trems. I cut down along each side of the pickup routes. And build layers to build my own 25.5" scale .. 24 fret. ML style Guitars.. I have about 7 of them. Or more? Like 3 or 4 Stealth Style ML Builds too.. so I luv seeing anyone do their own work. Learning to make guitar major reconditioning and modifications a hobby....
Hi Kyle, I never post comments for some reason but this video fired me up. Please make more stuff like this 🙏🏻
It is great to watch someone not that professional doing projects like this. It is encouraging! 💪🏻
Hey Kyle, I see you went to MOJO. My brother is the VP over there.
Its a good company. They make some great products.
Enjoy the show! Never miss an episode!
a wall of sweet amps stacked so high you can just barely reach the top controls. I like you Kyle. living the dream.
Remember to angle that nut file towards the headstock in the same angle the string would. Makes the string move smoother and allows it to contact all the way on the slot thus not messing up your intonation.
Might be my favorite sounding guitar that I've seen on the channel, so far. Super articulate and just pissed off sounding. Good work!
Definitely wanna see more vids like this!!
I put a graphtec rezomax bridge on my e2 and i have been in love with it ever since. I have been surprised that they don't get more love. Nice build Kyle!
Im loving the Dadarrio Planet Waves tuners the best after getting a set installed already on a used EC401. They cut themselves after u lock and start tuning the string tight. I also own Grover kidney bean lockers and 2 sets Hipshot open gear lockers.
Wanted to mention the Planet Waves as well. I have them on an Epiphone Explorer and they are fabulous. That string cutting feature is the cherry on top.
I had a Epi LP Standard. I changed pick-up’s to Seymor Duncan P-rails, knobs to Speed knobs and truss rod cover to Les Paul Custom. That’s nice too.
hey Kyle about 3 years ago i bought a guitar it’s a copy a very well made copy of a les paul and i didn’t realize that the mojotone wireless harness came with this guitar i was always wondering why it would always sound so good like your guitars this one has become kind of my favorite it has a big neck no inlays an ebony fretboard which i love it’s all black in color with white binding and most of all it’s heavy i love them heavy
thank you for your video of the upgrades for your epiphone
Dude, I swear 9 month ago I did almost the same thing to a semi-hollow Gretsch, same bridge, tuners, nut. The only difference is that i went for BKP P90s. Such a fun project, and now the guitar sounds and feels amazing.
Love to see more content like this!! Maybe as a suggestion if it hasn’t been done already.. speaker swaps and understanding your amp ohms to your speaker cab ohms.
Looks great! I would totally polish the back. I would always change the pickups on an Epiphone, I'm not a fan of them but I do like the Gibson Burst buckers. I think pickups are a personal choice, some people hear & feel the difference others don't. Excellent work!
17:00 just a little tip. Use some S-39 or Flux and fresh solder when trying to reheat an old solder joint. This helps to bring oxigen into the reaction which helps. The potentiometer is quitte good at dissipating the heat and it can withstand quitte high temperatures before your solder melts when using just the iron.
Looks and sounds killer! Would definitely dig a series like this
holy shit with the quality of these videos i expected you to have like 500k subs, you truly do deserve more recognition
i always sand down the finish off the back of the neck, feels so smooth
I've got an Epi SG with all Gibson hardware on it. It's an absolute demon. Only cost me around 500 all the hardware came for free when a guitarist smashed his guitar on stage and signed it and gave it too me.
Oh my god you were killing me with the nut file. You know nomad has an excellent video on how to setup a les Paul I really hope you watched it But guitar very cool I’ve been wanting to do the same with my les Paul junior from epiphone
First time watching your channel. I did not expect that great of a result, nor that impressive of a demo! Thanks for demoing the guitar in more then one way with the direct input sound and then the sound in the room. I wish more people would do that. Subscribed!
Cool video glad it worked out with what you had to work with.
Kyle you did a very good job restoring that Epi. I LOVE seeing videos of folks fixing a guitar that some one "goobered" up. I've got a Kramer tele thats in pieces right now I wanna fix up one day and hopefully I'll get the money and time to.
Amazing job, this guitar needed some love and you gave it.
I got one of those Mojo Tone LP wiring harnesses for a similar project and couldn't get it to work, I even chatted with a tech rep from the company. He said something was probably unintentionally grounded, it still doesn't work but it is quite possible I am just stupid lol. Keep experimenting with your content, good work.
Nice work Kyle looks great love the silver burst and sounds awesome!!
The T shirt is amazing 😅
Right? Chris and JPTR make the best stuff
This video was awesome. Love that guitar!
That turned out sweet those ratio tuners set that headstock off, but I already kinda like the old epiphone headstock shape on the customs the custom inlay and binding make it look classy and the shape of the ratios knobs or keys look awesome on it
It looks good and sounds good.
Now I want to find a neglected epiphone LP custom to pimp out.
This has to be one of top 3 favorite vids of yours buddy! Just did a restore on a '99 Ibanez AX-7521 Cherry Fudge 7-string, was almost a month of little headaches here and there but that guitar is the best sounding on my rack now lol definitely make more vids like this if you get the chance
i got the same project. I just bought a (April 2024 made) Epiphone SG limited edition Special 1 in cherry. Not a fan of the bridge setup but time will tell. All i have done is put some slinkys on and ordered some black chrome grover tuners.
Killer content. Would love to see you do more of these "zero to hero" kind of vlog/build videos. I think content like this would definitely be a huge help in terms of channel growth. A lot of people love shit like this, myself included. I'd rather poke around and find a killer deal on an older guitar that needs a little TLC, then drop $1500+ on something new these days.
this has $1500 in it at this point
Thanks fpr the info. I have a Ep. LP I'm wanting to upgrade and I may use some of your ideas.
This was my favorite of your videos. More please!
Great vid! Been waiting for you to do some guitar demos/projects!
That's such a sick lookin guitar! I've recently decided to start trying to do my own setups, mods, etc. and it's videos like this that make it seem alot easier to jump into when you're not super handy or mechanically inclined. thanks!
That was a fantastic video, and you did a great job on that restoration/upgrade. Please make more videos like this. Very entertaining and knowledgeable stuff. Keep it up 🤘
I agree, regardless of what anyone says, I believe pickups can make or break a guitar as well. I've changed many pups in many guitars and have experienced it myself.
Hey man. Do the custombuckers squeal when playing loud under high gain? Thanks!
Killer job Kyle, glad you could bring her back from the abyss, love the silverburst finish
Did you flip the toggle switch positions? Didn't sound like you were using your neck pickup so i can only assume you have the bridge in the up position
Great work brotha. I am really gonna have to get me one of those mojo tone harnesses. I don't solder very well. I do enough to get by, but yeah, that harness is the berries man.
That guitar looks amazing! The only small thing that I would change is the switch tip. I think that a black one, like the original, will fit so much better than this orange one. But still a very hot guitar, dude!
Hey Kyle, what a great journey you took us on with this video. The guitar was definitely worth putting some time and money into. It turned out really good. Thanks for putting the time into making this for the channel. Keep up the excellent work! Look forward to seeing more cool videos from ya. Cheers from Texas.
Great video! I modded my shecter with the same bridge and tuners. They are just great. I agree pickups make a huge difference. I put a set of Bare Knuckle polymath in my LP. Sounds killer. They replaced a set of Tim Shaws which where great. But they sound clearer and way more dynamic.
You must upgrade Epiphone Slash to next level…. sounds Gibson Slash!!!!! The community want this video and a battle this Epiphone Slash Upgrade VS Gibson Slash!!!!!!! 👏🏻
I know it is probably impractical but please do some more videos like this in the future please! Love projects like this
Yea I know exactly what you're talking about..... Pickups do matter!
And yes, I'd love to see a video of you putting that bridge on.
It’s great!
I feel like this video really highlights the difference between woods in epiphones and gibsons
Albeit you used a couple of specific/individual pickups for your desired tones
I feel like stock gibsons are just bread and buttttterrrrrr
the sound is awesome!!
Have an epi. L.p. 100 lefty ... worked on it .plays way above it's pay grade! It's hard to find Lefty's for a good deal so it was a score. Cool video bro,subd.
I have the same guitar and installed the Kerry King EMG set. Freaking monster now! Loved this video dude!
Nice job! I’d like to see more of this. I rescued a super neglected 08 MIJ Jackson DK2 with a blue flame maple top last summer and am thrilled with how it turned out. I’m not exaggerating when I say it was DISGUSTING with shit I don’t even want to know what it was, but it cleaned up amazing. Felt great to do because it was in such awful shape and now is being shredded properly after being brought back to its former glory.
Nice ... Its cool to see pickup wiring going easy especially for someone like me that has the worst soldering skills in the universe. Sounds great btw..
I'd love to have that PRS amp you got behind you...
Kyle, you my friend, are a genius!
I love budget guitar builds, I did a Stagg L320 Gothic Les Paul body and it turned out so much better.
Loved the video! Subscribed! Awesome channel! Hell yeah you got my vote for more these type of videos. 🤘😎🎸
More, more, more...we love you in Hanover Pa!! Great job brother- I did the same w/ same guitar and its shockingly good...especially for the $..
Great stuff Kyle, more like this please!
Being that I love to work on guitars, probably a little more than playing them, I’d love to see more of this type of video from you.
Great job! Looks killer and sounds awesome!
Josh middleton also rocked a silverburst ESP for a long time, so it all came together! Great guitar, great video, great playing, loved everything about this
Nice work, killer guitar now.
Which compound did you use for polishing? Awesome video Kyle, love your content. You deserve to be up there with the foremost respected and popular guitar UA-camrs.
Just the Meg's Ultimate Compound that you buy at Wal Mart. If I run into something like this again, I will def order something with a little more cut to it
Did you play the demo at the end of the video with the neck pickup? I ask because you have the switch up.
No, I actually had the pickups in backwards in the harness but was on a bit of a time crunch when filming so just left it like that for the time being, haha.
Thanks for sharing your project, I do the same thing, I buy budget guitars and turn them into something that I think looks amazing.
Bought my orange crush from sweetwater at a killer price months ago. Definitely a good recommendation.
Sweetwater is incredible and your videos really affirm that. I've tried to order from them many times to support such a great store and unfortunately can't, being in Canada. We don't have a comparable in Ontario. Also, I have always just wrapped some finer grit sandpaper around the string gauge I want to file the nut slot. Works great for me that way. Those files would be good for blanks though!
Great video!! I did the same with my Les Paul copy that I bought in 1986. I used EMG plug and play pickups. So so easy!! Keep doing what you’re doing 🤘🏻😎🤘🏻by the way I think you have just a little more room for another amp on that wall
Nice job on that guitar my friend God Bless and have a good one.
I'm impressed Kyle , 😉 keep up the great demo's. The guitar looks great , good job 😉 more demo's like these .
GREAT JOB ON THE POLISHING!
Awesome video bro. I just bought a budget Ibanez I’ve been thinking about doing the same thing with. I would love to see more videos like this in the future.
Sweetwater is the shiznit! The last purchase I made with them was a bag of picks. Afterwards they call, (like always) to see if I'm happy, or if there's anything they can do....FOR A BAG OF PICKS PEOPLE! A BAG OF PICKS....Yeah!
I love guitar restoration/mods/upgrade videos theres not enough of them out there either..
Nothing like hotrodding a guitar!!! Great job Kyle!