Це відео не доступне.
Перепрошуємо.
Map of the Electrical Engineering Curriculum
Вставка
- Опубліковано 18 сер 2024
- Deciding between Computer and Electrical Engineering? ...or How to prepare for Engineering?
ARDUINO BUDGET LINK!!!
www.amazon.com...
Slightly more expensive kit
amzn.to/2CaQlT4
In this video I talk about the relationships between classes when choosing an Engineering degree.
My crush must have a degree in Mixed Signals Engineering.
Ευάγγελος Κοτζιάς hahaha
And my crush is medical student
@@musicpanda8333 she should develop a medicine that cures all girls of sending mixed emotions syndrome
@@DerangedIntellectual9 lots of gender assumptions going on there... I get it, I'm just saying.
@@DerangedIntellectual9
*Cures all girls of sending mixed signals
Electrical Engineering is one of those majors that is not for everyone , it is really tough and hard work, there is a lot , and I mean ,a lot to know. There is a reason why it has the highest dropout rate amongst all engeneering majors, but it is absolutely rewarding.
From an Electronics graduate
I think that's bcos electrical engineering have more fresh intake student than Mechatronics bcos this discipline under mechanical engineering deals with both mechanical, electrical and computer engineering not to mention Biomedical engineering the list goes on so my point is no matter what departments you're every engineering major is for you. All you need to do is to open up to every possibilities bcos you're an engineer.
Teachers also intentionally try to fail you. TA’s will also try to screw you over bc they wanna gatekeep the degree. Sure the math is complex but it’s not impossible for a math minded person to get through the coursework
@@greenpigking6974 genuine question, why would they want to gatekeeper the degree ? What’s the rationale behind it
Aiming for that reward 🫡
@@greenpigking6974 I’ve had instructors like that in the past, which is exactly why I chose to go to the Air Force after high school. Low and behold years later I’m starting this fall as a freshman majoring in EE. Pray for me! 😂
Can't stress this enough to new students: DO NOT blow off your math classes. Don't just pass them. You MUST learn them. Literally every one of your engineering classes are taught using at least calculus.
I'm an ee student in August, I will not forget this
@@1.8millionvolts87 i m a third year ee student. I blew off every single class n didnt pay attention to them. Now i m struggling to graduate on time. PLEASE pay attention to all your core classes. GECs doesnt really matter that much but try your hardest on your core classes.
@@successorof68 I Just finished my first semester , i got a 3.45 out of 4 on my overall classes. Needless to say that i'm pretty proud of myself.
Now i'm getting ready for my second semester starting on 24 of Jan
Can anyone tell me what all math/science subjects I will need to learn before learning electronic engineering/cs?
@@vongalaxygg4216
-calculus 1,2 and 3 (they are all equally important and each one builds on the previous one but #3 encapsulates everything in beautiful and elegant way so pay extra attention)
-physics 1,2 and 3
Also known as: Mechanics, Electricity and Magnetism (E&M), and Thermodynamics
-a college level intro to CS class (at least in my experience, CS was under taught in a EE degree and it is one of those things that you are expected to know. So self-learn and become good at CS by self-learning in internet.)
-a college level General Chemistry class(in my opinion the same concept as for CS should be applied here depending on how far your interests go. If you are already skilled enough to dive into other stuff, why not also dive into chemistry? and then into biochem? Knowledge is power, expand your toolbox.)
P.S:
Quality over quantity. Make sure to put an emphasis on understanding everything conceptually and making the underlying connections behind everything as you expand knowledge.
It's weird watching a video about Engineering courses with banjo music playing in the background. Good info, though.
Bluegrass music rules! You could use these skills to build your own bluegrass radio station!
I've been in the HVAC field for 5 years & do F-16 avionics in the Air National Guard and I've been thinking about an electrical or mechanical engineering career. As time goes on, I've been motivated to learn how equipment is designed and built from an electronics perspective. I do have the head for school but I have a family and know it'll be a long, difficult commitment but it will be worth it for them. I just turned 27 and many of the old guys I work with always tell me I'm still young and I always get this feeling that I should take advantage of it while I still have time.
Yeah I'd say go for it while you're still in your 20's. You can always start by taking one class at a time, but at least your knockin em down.
Went back into CS in late 30s. In 4 years, you're still going to be 31...It's whether you want that engineering training or not.
So were you able to start your career ?
You really should well... Its been 2 years but yk still can
I come to to this video every few months to see how I'm making progress with my studies. Always great to see I am indeed making progress and that more of the concepts explained here starts to make sense. Thanks!
Louis Henn that great! Glad to hear that
Probably I'm gonna do that too
why this guy sound like he's trying to not wake up his mom in the other room
Metal Man it’s called ASMR..
Because his mom is sleeping.
He sounds good
@@buster117 Yeeah, don'tchu respect yer mum?
Don’t know. Maybe he says! If he does I can’t hear him.
This is the kind of material that must be shown to students early in their journey, so that they get a feeling of why those theoretical classes are strongly needed.
the courses i am taking in college finally start to make sense after watching this video. great video!
Nice! That's the goal of the video, to give you a map of what an Electrical/Electronics Engineering degree consists of.
You forgot Control system, Power electronics, signals and system, Electrical Machines.
Elective subjects maybe.
@@BOOPATHYNIRMALdevaraj Signal and systems, or signals and control systems, feedback control systems are not electives, they are fundamental courses
I think you forgot too much. Sorry, you may need to redo this video.
In some universities there could be a specialization to focus on control theories and automation, where student would learn advance control theories such as adaptive control, nonlinear control optimal control etc.
Definitely forgot controls. When I was in undergrad signals and systems was considered part of the communications curriculum. Power electronics and electric machines were considered part of the power engineering curriculum.
General Education also includes Chemistry, Language and Literature and Psychology.
In our curriculum, for Electrical Engineering, we don't have much for Computer programming concepts but only basics for Softwares we would use such as Autocadd.
We also have AC/DC Machines, Control Systems (such as motor, starters, etc), Basics in Refrigeration, Mechanics, Electrical Codes, Electrical Design and many more.
There are also optics/photonics, signal processing and control systems track options. My college offered signals and systems, digital design, circuit theory, microelectronics and entry-level electromagnetics as core EE classes, after which we branched out.
"general education," more like high school all over again.
More like classes only required to give those liberal aet dumbasses jobs
Its free A to boost gpa. Thats how I view it. I just show up and do hw for my other classes
Sucks so bad
I hate wasting my uni time during these gen ed classes, I would recommend using extra time during these ‘basic’ classes to start studying early to get a start
That's something I never understood about universities in US. I haven't heard of other countries who do this.
After finishing my 4 year bachelor's degree in EE, I agree somewhat with this video.
He did forget to mention certain classes such as Control Theory, DSP as applied to all discrete and continuous signals, as well as specialized classes such as HVAC controls, microelectronics, robotics, plc engineering, and photovoltaics.
In my experience, there was less branching from one path of study to focus on more specific topics except towards the very end. In my case I took classes more oriented towards solid state micro-electronics at the expense of learning more about Power systems and distribution or wave mechanics.
In reality I touched on almost every single subject in significant depth throughout my career, all the while taking the required math and physics to go along with it. I basically followed the plan outlined for me from the beginning, with small degrees of freedom in class choice towards my final year.
How much of it actually helped u in ur career
I built a traffic light on the breadboard as a hobby. It was really cool how the colored LEDs light up and worked. I had a power engineering course from Indian Institute of Technology. It was awsome! I can't understand calculus, so I only got through my EE courses, which I audited, by route memorizing the formulas, but word problems destroy me.
Computer programming is hard, but PLC programming is very easy (basic digital electronics) and pays very well and is in great demand for factory automation.
Frank
Currently doing EE first semester what advice would you give me most so concerning math
@@geraldwesley Gerald, try to take all of your calculus and differential calculus classes first. By doing so, you will know, if you do well, if EE is right for you.
Frank
At my university, it's Digital Logic Design, Electronics, Signals and Systems, Semiconductors, Electromagnetics, Communication Systems, Control Systems were the main curriculum excluding design lab courses, math(Calculus, Linear Algebra and statistic courses),. Courses like electric drives, power systems, digital system design and etc... are electives
Great video, but at 4:36 did he say "penis matching?"
I thought I was the only one!
LOOL just noticed!
Haha! *Impedance Matching
my comment exactly
peanuts matching xD
Great overview! Would have been helpful to see such a road map in the early years of electrical engineering studies ...
That’s exactly why I made this
@@RelearnMath
I just graduated and I wish if I saw this vedio before, but even now it is so useful and it will help in my job search.
Thank you
I´m mechanical engineer, some years ago I needed to know RF, so I think: "I have the base, so I go directly to study RF"... A Big mistake... I was more lost than a blind in a firefight.
Hahah RF is kinda dreaded by most EE students too... Can I ask what situation required you as a mechanical engineer to study RF?
@@nidhinbenny7975 maybe in manufacturing processes
This was a VERY helpful and well done video!! Keep up the Great Vids! You're Awesome!
where is control sir
Sir you saved my life, thank you so much!
Super cool seeing this work flow as a computer scientist.
Thanks mate for the wonderful and informative video. It clears up so many things at so many levels for me. Keep going...
4.:21 the divergence of the E-field depends on the charge density - Gauss law
I'm a licensed electrical engineer that specialized in control systems. I earned my license after passing the P.E.
You totally forgot control systems engineering .
Wow, That is so amazing! Even I first knew about the map of electrical engineering, thank you for the video!
Digital Systems -> recommended texts: Schaum's Digital Principles
Signal Analysis (Signals And Systems [Laplace, Fourier, Z transforms, etc.] ) -> Schaum's Signals And Systems, Bracewell
Circuit Analysis (Electric Circuits) -> Schaum's Electric Circuits, Boleystad
Electronics -> Schaum's Electronic Devices And Circuits, Boleystad, Rashid's Microelectronic Circuits
Electric Machines -> Schaum's Electric Machines And Electromechanics
Power Systems -> Schaum's Electric Power Systems, Glover
Telecommunications -> Schaum's Analog And Digital Communications, Couch, Haykin, Proakis
Automatic Control (Control Systems) -> Ogata, Schaum's Feedback And Control Systems, Kuo, Nise, Bishop
Electromagnetic Theory -> Schaum's Electromagnetics, Lorrain & Corson
Power Electronics -> Rashid
Deepening/Optional:
Digital Signal Processing (DSP, digital filter design [FIR-IIR] ) -> Schaum's Digital Signal Processing, Tan & Jiang
Analog Signal Processing (analog filter design [Butterworth, Chebyshev, etc.] ) - Rashid's Microelectronic Circuits
Electric Traction
Electricity Markets
Advanced Electronics (Power amplifiers, etc.) -> Rashid's Microelectronic Circuits, Schaum's Electronic Devices And Circuits
Data Transmission
Digital Communications -> Proakis
Microcomputers
Image Processing -> Pratt
Control Systems Design -> Ogata, Kuo, Nise, Bishop, Schaum's Feedback And Control Systems
Etc.
Others:
Hambley's Electrical Engineering: Principles And Applications
Schaum's Basic Electrical Engineering
Schaum's Basic Electricity
Enjoy!
Pretty much exactly what I was looking for!!
Funny. I was forced to learn RF and the signal flow my first year in the Marine corps and im pretty good at it. Most of what you said leading to that i have never learned.. lol
Your marine corp knowledge in RF and Signals wouldn't even be close to the rigor and depth of one good University course. One has to take at least 6 university courses specializing in systems & signals, Microwave engineering and advanced math in addition to 30 other very difficult courses just to get an electrical engineering degree.
@@justingreen8006 It is nearly impossible to explain this concept to someone that really has no idea how much knowledge is required to get a BSEE. I could never get into the field because I graduated in the tech bubble burst, with my BSEE emphasizing chip design. Worst timing ever! So I do predictive modeling in the insurance industry. I built a complex data analysis spreadsheet and trained a new coworker how to use it. This person had an extreme superiority complex, mainly because she had an MBA on top of her BA degree, and I only had a BSEE. After she learned how to use my spreadsheet, she started telling everyone in the company that she was better at math than me. I was like "Hey beyatch! it is a far cry from USING a spreadsheet to creating a ridiculously complex spreadsheet". And this kind of work doesn't even scratch the surface of what an electrical engineer's knowledge base contains.
I took a basic electronics class, and we went over digital, analog, basic coding, gates, etc. in a single semester. Like idk why you would have separate classes for them or why you would learn the math part first. If you just have some Arduinos you can really learn these concepts well without having to go into all that math, then when you learn the math part it will make more sense because you can relate the abstract rules you're learning to phenomena you experienced in a concrete way earlier.
You need a fundamental understanding of Mathematics to understand some deeper concepts. EE goes way beyond the Arduino, think about how your cellphone communicates...I don't know how I would even graps the conceps without a good understanding of Calculus.
A basic electronic course will help you assemble circuits an EE degree helps you design circuits.
Notice you said basic. All of these concepts have great complexity and need multiple focused courses before someone can do a true design by themselves without having their hand held.
I took a course about instruments and measurement, it included many many concepts, circuits analysis and design, electronic circuits and devices, ADC DAC, electromechanical stuff, signals, semiconductors, optoelectronics, filters design,..... etc. You need to have a strong background in all of these concepts, not just in this course, but in general all of the elective courses, after all this is what engineering is about, using your basic knowledge to developing new inventions and solve life problems.
This describes what you learn in a physics major.
Loved this video! Thank you so much. I have finished the so called core classes without much difficulty and about to start my 4th semester (there are only 6 semesters in our program ), but my problem lies mainly in the combination of maths\physics and engineering. I guess I need to learn how to apply the basics to different scenarios? And you are right, it is difficult to choose one branch of so many to learn in depth. I want to work after I finish bachelor but I don't know exactly what job I should take. What we have learnt in bachelor are so general, that I feel I can't do anything...
That’s how I felt too! I felt like I didn’t know anything after a bachelors degree. I think employers understand that and just expect someone who is willing to learn on the job. As long as you’re willing to learn as you go, you’ll be fine. Don’t worry about not knowing enough.
@@RelearnMath Thank you for your inspiration！
Okay, I started with an analog IC design focus but now I am more interested in RF technology. But I haven't done DSP. Any advice for me?
Also, can you make a video on some of the basic training an electrical should take outside the class? Thanks in advance.
4:36 I cant be the only one that heard it.
Lol
The initial general classes are not for different fields as much as it is supposed to be further general college education i.e. beyond elementary, junior and high schooling; it seems in some days, school came secondary to helping out in farming as primary survival took priority.
I dropped out in the middle of math and physics too... but not because it was hard or I didn't like it... the passion and learning continues to this day some 13 years later... I just dropped out because I refuse to take a loan, and I ran out of education funding and Pell only goes so far. So I continue learning on my own than. I never wanted a piece of paper, I just wanted knowledge anyway. Although a career to replace this bum job would be nice... awe well... c'est la vie I guess.
I hope the best for you you man
@@josiahademiluyi4677 good looks, thanx.
I want sir you to make some more such videos to encourage electrical engineering
Man you are good. I think I studied most of the things you said but I have now forgotten.
Excellent video. Lol, no love for controls and signal processing? The math branch in the video could've been further expended into these two. Also semi-conductors? The last one I guess us technically electronics. Though semi-conductors deals with more micro-stuff.
Great! But you forgotten Control and Automation
Great explanation, Thank you!!
Where is Control systems, Automation, Digital Control Systems, Robotics, PLC Programming???
the first video i saw about this subject, what I will say is since i understand what you said, then you re genuine smart clever perfect
thanks dude. this cleared up some questions for me.
Is it possible for a computer technician/electronic technician with 5 years of experience with a bachelors degree in electrical/computer engineering to become an full engineer like for companys such as microsoft, apple, or google?
Yes, I don't see why not.
It'll be a rel uphill battle because with 5 years experience as a technician, any company will see you as someone who's made their decision with low level technical concept application and not someone who has the skills to do high level engineering work. Engineering firms are much more likely to hire someone directly from school, or someone who has already been in an 'equal' job for many years.
how the heck my mexican uncles that cant read , or do math know how to mess with electric stuff does it just come natural to some people
Can you make a video on "how much of what you learn in school is used in the real world such as the job you get after graduating." Thanks in advanced !
Great Idea!!
See the problem with that question is that it's really going to depend on what job you get. There's a lot of diversity in the workforce. People I've chatted to about this say they use approx 60% of what they learnt but what that 60% is differs between them (if that makes sense). What they've also said is that your degree will simply act as a foundation for the knowledge you'll have to learn in your career as you're going to have to become an expert in the specifics of your job. (Eg Clearly an engineer who's worked in power electronics for 10+ years is going to know significantly more than what you learnt at uni)
At my school, they also offered solid state physics as another core area.
u concentrated more on Electronics. machines, machine design, Control systems,Special machines and linear machines, Drives etc.
but nice video sir, subscribed to your channel.
expecting much more
Can you please tell me, in which college/university did you apply to?
Will be making a short video on where I attended Engineering School soon!
RelearnMath Thank you :)
Automation and control systems? Why not?
For the record, this is more electronic engineering than electrical. This distinction seems to be emphasised more/less from place to place. There is a large overlap between courses, which obviously will depend on your university/college.
For instance, RF electronics is definitely an electronic module, not an electrical module. An equivalently specialised electrical module would be power systems operation or power system dynamics.
Yes that’s true...the definition of Electrical Engineering varies by your university.
General education classes are not necessary on the university level and are a waste of money and time. An individual receives such well-rounding classes in high school. Unlike universities in India, American universities do not have enough laboratory, hands-on training classes. A 6-credit science course only has, in addition to lecture, three hours of lab a week. I was graduated from undergraduate school without the hands-on training necessary to keep a job in chemistry or electronics. I now own a sole proprietorship job repairing consumer electronics that cannot even pay for the advertising that I have to do. I am 51 years old with a Master of Science degree in biology and a Technical diploma in electronics and courses in EE and power engineering and I can not hold a job in electronics because I do not have sufficient skill, such as with that disgusting SMD soldering. My universities should have, but did not, given me the necessary hands-on lab training with their fancy, fully-stocked labs.
Frank
Frank Reiser Video/Audio Service
Here in Brazil you get all mixed at same time, kind of crazy, and then you make a “recall” with deeper concepts
What if im interested in computer/ electronic hardware what subject does it fall into for Electrical Engineering? Thank you so much.
It’s good that you have pointed out IoT and 5G. How about Artificial Intelligence? Is there a good relation between Electrical/Electronics/Computer Engineering and AI?
Can you make one for mechanical?
I chose power field in the university. Do you think it was a good choice? I recently got interested in computer science. Would it be possible to do master in CS?
Well everything is possible generally speaking, the real question is if do you have the general knowledge to go to CS? In addition you can also mail the coordinator of the course asking for your particular case. For what concern power go chill bro, is a fundamental infrastructure of our society and a proper power system is essential, see what is going on in Texas
Okay so basic circuits, digital electronics, and electromagnetics, and mixed signal stuff are all I need to know sweet
What about nanotechnology and nanoelectronics
Thank you so much I was lost before I watched this video
It is very amazing, Thanks a lot.
I literally laughing alot while watching it. Realising how i wasted in time in unknown education😁😂
How many years do i need to learn to learn all this
I started at Pre-Calc and Trig my first semester of Spring ‘21. I have taken 13-15 credits per semester and 3-6 during the summer. Im betting I’ll graduate in 2 more semester Spring or Fall of 2025 because schools only offer some classes once a year.
Thank you so much such simple yet extremely beautiful explanation 🥺❤❤❤love from India 🇮🇳🧡
sir I'm interested in Computer's , and solar power , Electric vehicles and Drones , these are my interest
should i choose CS Engineering or Electronic & communication engineering OR electronic & electrical Engineering
Vinaykumar p Look into mechatronics maybe
I'm an electrical engineer. Was part of the electric car club at my university. You will need power courses that give a solid understanding of electric motor drives. For solar panels that is more electrical materials engineering that is pretty standard. For drones that is mechatronics and this is quite different than the other 2. Drones can be mechanical or electrical. Mechanical will be more fluid dynamics and electrical will be a mix of both which is called mechatronics. There is always the software portion as well to all of these and that can be covered to some extent in computer science classes. It's an exciting world for engineers, there is no end to fascinating work and projects. And then there is a masters degree that will make you specialized in a certain area. Only do this if you are passionate about something and not for the extra money
Go for the electronic & electrical engineering, this is the fundamental course or major from which you can do anything of the topics you desire, it will give you the basis to work in any of these areas. I am an electrical engineering and in my university we were trained in power, computer, communications and control engineering, so electronics and electrical engineering is basically the core of it all.
rrace2 any chance you’re referring to njit lol
If you want that Google Electromobility and Renewables such courses exist
Don't you need some optics as well?
This makes me happy that I am from Germany and don't have to pay thousands for GenEd classes
In California, Community college is free. (Where you take GenEd classes)
Do you know what career path wins the most money? pls answer
Yup, the one that you’re most passionate about....people tend to do a better job at subjects they enjoy and earn more as a result...at least that’s what I’ve seen in industry.
@@RelearnMath thanks for the clarification m8 !!!
Sir did you just say "pen*s matching?" Ive listened to it a couple times now and thats all im hearing. During microwave engineering.
Haha i think it was the noise reduction feature on the audio
Can you please do a map of materials engineering. I'm interested in what each class name teaches. I have the list of classes from RPI and starting as a freshman in 2023. Thanks
All of this in 4 years 😰. May the Lord have mercy on our poor unfortunate souls
I have just graduated with a 1st class this summer... doing my masters..... so yeah worth it
thanks legend that knows alot, youve helped me
4:33 These fields will focus on deeper topics such as reflections and penis matching...
Lol
Great video!!!! Road map.. thanks!!!
Really a great video ! Very informative.
Thank you for this informative video 🥰
watchin this video as a biomedical engineering student, and noticed that almost half of the topics are same
EEs are not made to take a year of general chemistry anymore?
Awsome! I love my major, so many possibilities
Yes! I had no idea how broad the field was!
I wish I would watch it before finishing my engineering graduation
So basically, you become electrical, electronics and computer engineer as well.
In a way yes, they are all related so if you’re curious enough, you can definitely pick up those skills along the way. I didn’t like programming when I started university but now it’s mostly what I do.
My favorite (control systems) didn’t get the attention it deserved 😢
Please do mechanical engineering map
same math classes, physics, classical mechanics, "engineering principles" Yeah that's about it.
@@adminacct1965 Spot on.
Very simple.
Calculus 1-> sucking cock->degree
Really interesting video
Is calc 3 just multivariable calculus?
+Hermes S Yes
Hey man thanks so much for this video.. can you make another video that delves deep into physics degree as well? Thanks.
Sorry! Don’t know enough about physics degrees to make it.
@@RelearnMath do you have physics proff friends?
I'm studying electric engineering now in high school and our course is not organisé at all
How many of those “real engineering” classes have labs associated with them?
Nearly all of them
You dont know total syllabus also ....govt job is not easy for anyone.
Wow, I congratulate you on this beautiful vid sir, well done! (minus the background music lol)
Control Engineering???
very useful! thanks bro
Aaaaaah......thermodynamics....a subject from the 7th circle of HELL. What a nightmare it was for me.
Thanks for ur valuable info
He left Intrumentation technology. PLCs and Control Systems Engineering
Thank you for de help.
What books do you recommend?