Guys I made a mistake here and I apologize for this mistake, In the circuit diagram that I have given in the video, I forgot to short pin 13 and pin 8 of the IC and I forgot to short pin 15 and pin 4. You can understand everything well by watching the whole video.
Guys I made a mistake here and I apologize for this mistake , in the circle diagram that i have give in the video I forgot to short pin 13 and pin 8 of the ic and I forgot to short pin 15 and pin 4 you can understand everything well by watching the whole video
Sir i inserted the components to pcb board and soldered but it not worked, can i use those components for another is it works ? Sir please tell me because tomorrow is my science exhibition
Sir My last Doubt,when I'm soldered to all components to the pcb board , the board was looking like black marks on the soldered area and smelling like melted ? Why Sir, is to works or not. If components will be damaged ?
Nice project but yeha per ac circuit ke sath ye 9 volt batter aur red led lite lagana compulsary hain kya mujhe ye samajh nhi aaya ise lagaye ya nahi compulsary hain ya nhi
Sir circuit mein ek problem hai jab tak microphone mein sound de rahe hain abhi tak LED chalu ho rahi hai Varna vah band ho ja on off wala system Kam nahin kar raha jab tak ka sound de rahe tabhi Tak circuit work kar rahe hai
Bhai dc jo project banayein hai woh mujhse ban jayega lekin ac wale main der hai ki galat connection hone per current na lage aur doosra ghar main koi bhi light short na ker jaye
![[New Very] Sensitive Clap Switch || How to make a Clap Switch || using 4017 IC ||](/img/n.gif)
Guys I made a mistake here and I apologize for this mistake, In the circuit diagram that I have given in the video, I forgot to short pin 13 and pin 8 of the IC and I forgot to short pin 15 and pin 4. You can understand everything well by watching the whole video.
Ya bro i understand 13 pin is enable pin we must have to put on ground in order to run the Ic
@@Electro_shastra👍👍
Guys I made a mistake here and I apologize for this mistake , in the circle diagram that i have give in the video I forgot to short pin 13 and pin 8 of the ic and I forgot to short pin 15 and pin 4 you can understand everything well by watching the whole video
i not understand broo
Lll
Very best and informative video I completely and successfully made this project for college thanks a lot ❤🌹.
👍
You are super sir your explanation and your response
So nice thanks the world's best teacher
Nice Clearly Explained
Sir it is working i make that. Thank for your response
❤️❤️❤️
How much distance it works?
Wow nice
Thanks Bro ❤️
Very very very thanks
Thank you for my project 👍😀🔥
T.q bro this is my project in the school.
👍
Nice project brothers, AS TRONIC always support your chanel
Thanks Sir 😊
The ckt is working properly I tested😊
Which colour resistor did u use? Ochur or blue?
Kiya isme microphone ke jagha IR receiver use kar sakte hne.
It is working❤❤
👍👍
Super👌🏻👌🏻👌🏻👌🏻👌🏻
Awesome😘😘😘😘😘😘😘😘😘😘
Mạch điện rất hữu ích xin cảm ơn đã chia sẻ với khán giả
😊👍
Are we use solar plate in place of wire extension
Good work.. 👏👏
Agar ham isme battery 🔋 use n kare to only bulb 💡 lagae to chalega kya
@@krishanastudiomalikpur no
Thanks ❤❤❤❤❤ brother 👍👍👍👍
Sir we can use 2uf 63v capacitor
Yes
Sar please tell me that values my comments are not seeing
Which resistor value I put in the sound detector please tell me sir
You can experiment with the 100K, 10K, 1M resistors
Sir LED strip k sath ko bhi 1 ohm k resistor se jodna hoga pahle
Kya 12 v rely ka use kr skte hai ...12 v ki bettery lgakar
No
😮
Sir i inserted the components to pcb board and soldered but it not worked, can i use those components for another is it works ? Sir please tell me because tomorrow is my science exhibition
Yes you can use
Sir, can I use normal wire in the place of copper jumper wire used in the video..?
@@techyshort8088 ofcourse you can
Sir My last Doubt,when I'm soldered to all components to the pcb board , the board was looking like black marks on the soldered area and smelling like melted ? Why Sir, is to works or not.
If components will be damaged ?
@@techyshort8088 I think no
wonderful
can I use 50 volt capacitor
It's working thanks
Congratulations 👏🎉
@@skr_electronics_lab thank you so much,
I am from tamilnadu
can you say upto how much distance it can recognize the sound?
project done 😎🤙
Sir what is the value of diode
Nice project but yeha per ac circuit ke sath ye 9 volt batter aur red led lite lagana compulsary hain kya mujhe ye samajh nhi aaya ise lagaye ya nahi compulsary hain ya nhi
It's compulsory
@@skr_electronics_lab okay thanks
Bro ye work kiya kya
Nice project👍👍
Jay siyaram🙏
upto how much distance it can recognize the sound....?
It's not long range , what can I do?
Sir me ne same bnaya he par work ni kar rha LED on ho gati he jab supply do plz reply me
Sir may be same bany clap switch lekin work nahi karrha off hothay but on aker nahi ho rahy problem solve me sir
Instead of blue base resistor can we use ochur base resistor?
Sir please tell me the resistor values which want to decrease the sensitive of the clap switch
Check the replied comments carefully
Hello,kiya isme 100w bulb ki jagah led bulb chal sakta or kitne what ka , please reply me
Yes led bulb jal skta hai
Friend, can you install some AC bulbs in this socket?
Yes
Can you send the link for the schematic sir
Check description
It says the blog has been removed
HOW?
@@JackReacher-gf6sg no bro try again
Vary nice😊😊😊😊😊😊😊😊
Agar ham Ac connection karke blub use krenge to baitry kitne din tak chalegi .
Agar ap ac ka connection karoge to 5v adaptor use kro
Bhaiya aapke sath banaya mene to lekin vo mic bhi kam nhi kar raha hai
Sir kya me apke pass se ye sarkit khared sakta hun plise
Yes
So nice and real
Accept 100k which resistor we can use?
Bom dia parabens muito bom
100k resistor ke badle 110k resistance laga sakte hI kya ?
Yes
Sir can we do this in solar energy
Yes but the volt is 5v
Sensor kese use Kare is me ?????
Sensor kiu use krna hai ?
@@skr_electronics_lab mosen sence karke jalne lage ga
Where i can get the code sir??
How much diameter does it cover
Depends on the Mic quality
Nice post 😮😮😮❤🎉
Very good sir
12 volt ka relay use kar sakte hai 😊😊😊
Sir ak bar claps karne par kit kitna time jalegi please batao
Jabtak next clap nhi krte
@@skr_electronics_labthank you sir
simple and skillfull project
Where can i get that type of mic
Electronic shop or online shop
Good
Diwar pe light rha toh on hoga kya
Yes
Design softwer name???
Bhi tumne toh 4017 ic ka 4-15 aur 8-13 pin connector kara hai toh discription me mistake kyu diya hai . Plese help me. ❤❤❤
Aik dfa Clap sy on hony k bhad kitni dair tk on rehta hy?
Jabtak next clap na karte ho
Sir circuit mein ek problem hai jab tak microphone mein sound de rahe hain abhi tak LED chalu ho rahi hai Varna vah band ho ja on off wala system Kam nahin kar raha jab tak ka sound de rahe tabhi Tak circuit work kar rahe hai
Bhaiii work kar raha lekin 5:14 yaha 2222a transistor use karo nahi tih voltage drop hga
Instead of that can i use 100nf capacitor
@@vasantchodankar7459 sry broo I don't have that much idea about capacitors 😄
Off horhy but on hone me 1 minutes lagrhi hay problem solve me sir
I need this totally esemble cirkit sir
Message me on Instagram
Please bro help me I am not able to join circuit
Why bro ?
@@skr_electronics_lab can I use led bulb
sir agar hum led ke badle 5v buzzer lga de toh woh clap sensor alarm ban jayega kya
Can't
Nice bro
ฟ้าร้องจะดับไหม
Sir please write an essay on this project like what is the use of this project and what is the advantage of this project and where it is used
Check the description bro there was a link for this
Sir chota walla microphone sa chala ga jo headphone ma hota ha
Yes bro chalega
@@skr_electronics_lab bhai nhi hua bhot pass akar clap krna padta ha
Bro transistor pnp or npn use
NPN
@@skr_electronics_lab sir diagram and video both are same circuit sir
I finished the circuit sir but not running
boss isska circuit digram mil sakta hai kya
Hlo sir
It seems like the capacitor is working to enhance mic quality
will it work if i remove the capacitor
No
Kya hum dc motor isme connect kar sakte hai?
Yes
How
Can you send me the diagram please
Did you watch the whole video?
Yes
Kya me 557 transistor ka use kr skta hu
No
Aap eak node mcu se dron bna skte ho kya please 🥺..... please
@@DHEERAJ.ARTIST83 Yes bro usi pr kam chal raha hai , bohat jald video ayegi
Thanks pr jaldi
Kyuki mujhe science project banana h school me dron ka
I can't open the link you gave for the circuit diagram
Where are you from?
Where we can get copper wala jumper wire
Electric fan/Motor repair shop se burnt fan//motor wire or waste house wiring wire se single strand cut n use karlo
Bro how to a circuit diagram
Battery kislea elega hua hai
Thanks sir😊
Sir what happened if we didn't connect the battery to device
Then the circuit will not work
Is project ka kya naam
Mera led bulb fluctuate kr rha h what's the solution
Switch on krte hi led bnd ho rha h or chalu ho rha h
Sir can I use 1uf 50v capacitor
Yes
Bhai mera work nhi kiya
I want to decrease its sensitive ness. But how it be possible sir please tell me
You have to change the resistors value of the sound detection section
Bhai ye jo transistor he ye kis tarika ka transistor he NPN /PNP KYA HE
Bhai plz batayo
Bhai ye kam karenga na nahi
NPN
Bhai PNP hoga to chalega na nehi
Circuit diagramme?
Bhai dc jo project banayein hai woh mujhse ban jayega lekin ac wale main der hai ki galat connection hone per current na lage aur doosra ghar main koi bhi light short na ker jaye
Hmm ap DC wala hi banao
@@skr_electronics_labsir ye microphone kaha se melata hai🤔
@@zahidkhanwaxir Purane headphone se
Bhai Video wala AC power hai na?
Sir microphone name bol skte ho
Any microphone bro
Kitne der tak light jale ga
Ap jab tk next clap nahi kr rahe tab tak
9 volt battery nahin lagaya Gaya to kya hoga ???
bhaiya saman nhi mil rha hai
submit karana hai project jaldi
Kab submit Krna hai ?
Message me in Instagram
Bro diagram bi dekha detha tho acha hutaa