Air lift well pump

Поділитися
Вставка
  • Опубліковано 28 вер 2024

КОМЕНТАРІ • 16

  • @sgtbrown4273
    @sgtbrown4273 Рік тому +2

    As a compressor engineer the first time I saw this was in Mississippi 25 years ago and it blew my mind. That well was if I remember correctly, 250 feet deep and the air compressor was a Quincy 390 -2 cylinder 2 stage running on a old diesel engine. The water was crystal clear and ice cold. It produced around 60 gallons a minute the riser was 2 inch and the injection line was copper tube around 1 inch. The pressure was 175 psi but I'm guessing on that. I remember kinda high for that pump but it didn't hurt it at all. It was still being used after being built in the 1960s. It was filling a 3000 gallon hand made galvanized water tank that supplied 4 houses and 2 farms. This set up has so many advantages . They only ran it once a week to fill the tank and add salt or bleach I cant remember. Thanks for sharing.

  • @pl747
    @pl747 2 роки тому

    what will that do with one of the harbor freight 1/2 cubic foot per minute compressors? I have a 500 gallon tank and will pump daylight hours with solar.

  • @kordy254
    @kordy254 4 роки тому

    Sir plz tel me the cost or quantity of the compresed air which rise 5 galon/minit and is rhis pump can rise water from wel if the water is deep about 30 meter

  • @rongray4118
    @rongray4118 3 місяці тому +1

    I wonder how each of you are doing these days - I still come back to these videos to see the smiles and achievement!

  • @edwardmartinez402
    @edwardmartinez402 6 днів тому

    Info is very helpful

  • @pl747
    @pl747 2 роки тому +1

    wonder if a centrifugal blower out of a central unit would produce enough pressure if choked into a larger tube than 1/2 inch. It would for sure produce enough cfm.

  • @surendramerugu3237
    @surendramerugu3237 5 років тому +2

    Sir,
    can you help in same process I need 3 inch water outlet. I need a clear diagram mentioned air line size and water outlet is 3 inch. How much pressure to be maintained in pump.
    And the well depth is 400 feet.
    Thanks & Regards,
    Surendra.M

    • @46lfries
      @46lfries 5 років тому +2

      Yes a hose will work in that line like that but if you build a pressure chamber look at introduction to Airlift pump you will see how a pressure chamber is made you only need a 20 watt air pump it's not about air pressure it's about a volume of air that would be about 600 gallons an hour look at Ben and Glenn aquaponics

  • @46lfries
    @46lfries 3 роки тому

    Get a 20watt air pump

  • @ricardosalinas5298
    @ricardosalinas5298 3 роки тому +1

    Hellow....how deep is your well?

    • @stephenmcaloon4035
      @stephenmcaloon4035  3 роки тому +3

      The well is60 feet deep the water table is down 20 feet

    • @ricardosalinas5298
      @ricardosalinas5298 3 роки тому +1

      @@stephenmcaloon4035 ok thanks, can you please give me information about the light plant, how many watts it is and the compressor also if it is 1/3 HP, 3 GAL. 100 psi ... I have a well equal to yours and I want to use this system, you would help me a lot with the information, thank you very much, greetings

    • @stephenmcaloon4035
      @stephenmcaloon4035  3 роки тому +1

      @@ricardosalinas5298 the compressor only runs at about 17 psi but high volume of air will produce more water so I actually use a twin cylinder compressor that I pedal power and when I feel lazy I use the ports cable 1/3 hp compressor some people use a wind powered compressor

    • @ricardosalinas5298
      @ricardosalinas5298 3 роки тому +1

      @@stephenmcaloon4035 perfect and about the light generator you use for this compressor (this video) how many watts is it? thanks

    • @stephenmcaloon4035
      @stephenmcaloon4035  3 роки тому

      @@ricardosalinas5298 it’s a 2000watt generator