Це відео не доступне.
Перепрошуємо.
Clever Jig Makes Wood Spiral Tree Ornaments
- Додати в
- Мій плейлист
- Переглянути пізніше
- Поділитися
Поділитися
Вставка
Розмір відео:
- Опубліковано 18 сер 2024
КОМЕНТАРІ • 176
Наступне
Автоматичне відтворення
Curved Inlay Strips - Easier than it looks?krtwood
Переглядів 260 тис.
MIXED WOOD SPIRAL VASE, woodturningMayuko Wood Craft
Переглядів 280 тис.
Because a Rounded Jewelry Box Is Harderkrtwood
Переглядів 39 тис.
7 Days Stranded In A CaveMrBeast
Переглядів 63 млн
Обман ради папы #юмор #топКостя Павлов
Переглядів 4 млн
Державний Прапор України підняли на КУРЩИНІ в рф😍🇺🇦💪🏻 #курськ #прапорукраїни #рф #війна #наступТелеканал Конкурент TV - новини Луцька та Волині
Переглядів 432 тис.
Обзор резцов для токарного по дереву из твердосплавными пластинами.Столяр Петрович
Переглядів 32 тис.
Woodturning - This Was Totally Unexpected!Harry Smith
Переглядів 3,6 млн
Make a Perfect Sphere Woodturning JigMuyoung Workshop
Переглядів 63 тис.
Wood Turning: Three styles of Barley TwistJShaw Woodworking and Design
Переглядів 135 тис.
Hollow Vessel Barley Twist: Fast VersionJShaw Woodworking and Design
Переглядів 8 тис.
Woodturning Indexing Hole JigMuyoung Workshop
Переглядів 7 тис.
Reindeer Ornament #5421 - Realtime POVkrtwood
Переглядів 87 тис.
The dangerous black teak sawmill is full of beautyWood sawmill factory
Переглядів 2,3 млн
Making a bird on the lathe is easyNordic Turning
Переглядів 31 тис.
MELLSTROY - первое интервью: как живет самый обсуждаемый стример годаВПИСКА
Переглядів 13 млн
Обман ради папы #юмор #топКостя Павлов
Переглядів 4 млн
ПОДІЇ НА КУРЩИНІ: ЕКСКЛЮЗИВНИЙ РЕПОРТАЖ НАТАЛІ НАГОРНОЇ З СУДЖІТСН Тиждень
Переглядів 225 тис.
Як на КУРЩИНІ ПАДАВ АКВАФРЕШ РФТСН
Переглядів 622 тис.
Get 10 Mega Boxes OR 60 Starr Drops!!Brawl Stars
Переглядів 15 млн
🤯 ЗДУРІТИ!🔺КУРСЬК: куди дійшли ЗСУ? 🦾 Наступ на Росію ЗВІЛЬНИТЬ Донбас? Новини від ЯніниYanina Sokolova
Переглядів 604 тис.
7 Days Stranded In A CaveMrBeast
Переглядів 63 млн
Обязательно запомни эту хитрость, что можно сделать из клеевых стержней!#shortsДелай сам
Переглядів 2,4 млн
Very neat mechanism. When you first started using it, I thought why bother with the bevel gears to drive the sweep when a simple lever would do, but then you connected it to the lathe to cut the spiral and it all clicked into place. I can well imagine the time you put into designing it.
Thanks, John.
best part of this video is showing us the trials during this process and what you learned. thank you for that. so many maker's videos go through the process so fast as if there was no mistake by the maker or nothing learned during their process of making
It's tough to explain things because people skip ahead when you do and then the video doesn't perform well and then the people who would like to see the explanations never see the video at all because it never gets recommended.
@@krtwood totally understand. well thank you for taking the countless hours of video production to share your talent with us people who can't do this stuff but enjoy watching you do it :)
Fantastic job! Love those jigs you’ve made! So clever
Thanks!
I'd go as far as to say that you are a modern master. After all the vids, knowledge and trial and error you've been through. Everything you do is a teaching tool. Thanks for making me wait for your next video!
Thanks, Ian!
I like seeing all of the production jigs
Nice. Looks like you have a jig for everything, great inventiveness.
These are very cool! Well done. The spiral-cutting jig alone is amazing.
You are the absolute king of jigs! I wish my mind worked like yours
A tour de force in woodworking jigging. Nicely done!
Thank you!
As one who sometimes puts more effort into the jigs and tooling than the actual build, I always enjoy your jigs and fixtures Kevin! Thanks for also showing and talking about the approaches that didn't work. Hope you have a great holiday season.
Thanks, Bob!
What a wonderfully satisfying jig you've made. Love the complexity of calculation and yet the simplistic design.
Wow. Nice job. Love the jigs. Brilliant.
Clever indeed 👍👍
This is quite clever. I’m glad you showed so much of it.
Thanks, Brian!
Pure genius.
That is the coolest thing I have seen in a long time. Your mind is wow! I could have never thought something like this up. That is next next level stuff right there!!
Thanks!
I like this a lot. Takes me back to the first time I read the book "Router Magic" by Bill Hylton.
Very clever design
I love your work and your creativity. I can see use such a jig for a lot of spiral work on the lathe. you definitely think outside the box.
I also love that jig. I don't do much lathe work, but that type of thing would get me making more on it.
Interesting jig designs. Thanks for sharing.
Very creative, fun to watch. So nicely done....
Totally awesome work making all those jigs to do such intricate work and the outcome - Magnificent. Again, my hats off to you. A jig just to drill a hole for the trunk and then the ornament's hanger hole jig ... .. and the Texturizer 3000 for the trunk with a jig to hold it while cutting with a miter saw.......way out there
Thank you, Clyde!
You’re amazing and I’m looking forward to the arrival of my new ornament.
Thank you, Heather! Should be shipping Wed.
The concept and delivery of ideas is superb. Hope you sell all your stock. They are beautiful.
that texturizer 3000 is epic.
Incredible work & that gig that you made is really over the top! 👏👏👍👍😉😉
Thanks!
WOW, you are on another level with your creativity and jig making! Absolutely amazing products and ingenuity! THANK You for posting, very interesting!
Thank you very much!
Fascinating.
You are a very patient man. And talented
Thanks!
Very clever design!
Fabulous work
Very nicely done. Great concept, problem solving and execution. Love the way your mind works.
Thank you, Randy!
You never cease to amaze!!!!! Awesome 👌! Love your work. Peace and good fortune and good health to you and your family.
Thanks!
I'm also banging out hand crafted items for the Xmas market. I recognise the glazed look in your eyes. Hang in there. Great jig!
Great work Kevin! Thanks for sharing the video with us!💖👌👍😎JP
Thanks 👍
Your very welcome Kevin! Have a great week!😎
Well dang, that's just awesome!
Here I was thinking how something could work this way. GENIOUS!
very cool. great that you provide an explanation too.
That's a very clever jig! Loved it :-)
Love these! Will visit the shop online !
Nice job Kevin!
Thanks!
Amazing job, i love the way you came out to make such a nice ornament..so clever use of gears! Bravo!
Thank you!
Wow, I'm sure you spent time on the maths and knew it would clear, but the spinney metal router bit comes so close to the spinney metal lathe! Must have been scary the first time you used it! 😮
End result is lovely, brilliant thinking on all the jigs man, great stuff!
Thanks! I just went as far as I could with it.
Ran into your video while looking for a faster way to cut Russian type Onion Shapped domes for some Christmas ornaments I want to do. The Twist is the trick. Could cut them by hand but oh so time consuming. I like your method with the gears, but as with making most jigs, it also eats up a lot of time and is not worth the efforts unless your making hundreds. Love you gear combination jig though......best idea I've ever seen, but I know you definitely have many hours into this. Just figuring out the gear combinations must have been a challenge. Love the idea though. Would love to study this more and think about making one, but this would take a lot of pre-thought.......HA. Nice Job!!!
Very interesting setup!
Thanks, Shaun!
creative. I like the process.
Why would 14 people give this guy a Thumbs Down? I honestly don't understand people these days...
Probably because videos with no narration are boring and in most of these types of video the creator explains how to build the jigs, rather than just saying, "see what I can make?"
Thanks for your perspective.
Love your channel.
Thank you!
Wow turning trees into trees
Really nice and soooo technical
Hi Kevin. Wonderful craftsmanship. Do you have a video of making the Jig used in this video please. Thank you. Keep up the great work.
After I picked my chin up off the floor...I subscribed!
An impressive jig. I can imagine the time to make the jig. Likely a few iterations on some or most of the parts.
I would have hogged out most of the material before using the router jig to make the sweep.
You mentioned the tailstock is now hard to move in and out. It sounds like the thread on the quill and/or the screw is swaged. This happened to a member of my local turning club. I had to machine a new screw then use the new screw to re-swag the quill internal thread.
I may be able to fix this for you if you just need a new screw. Machining external left hand thread is not a problem. I would need you to send me the quill and screw for inspection and potential repair.
Dave.
That's an amazing offer. I think I may end up making these once a year so I'm afraid I would just keep damaging it again if I can't get away without using the extension. I thought about buying all the parts for the tailstock to have another good one and swap the bad one in just for this but the cost is about half that of the whole lathe. I find that removing the bulk of the material with the router goes pretty fast. It's on the last few shallow passes where it starts acting like a climb cut and wants to take off so I have to slow down and keep control over it.
Thank you
Dowel Texturizer 3000 !!👍😂😂
Beautiful!
Thank you!
Pretty clever.
genius !!! you are !!!
You are so talented and have more patience than a hospital full of doctors
I mean, it’s really clever, and they look cool, I applaud your ingenuity and skill , but you could charge the same for a ‘standard’ Xmas tree ornament and make double the amount in the time it takes to make these. Especially factoring all the the time to figure out and make the jigs, new live centres and repairing your tail stock😉
That's just not how I roll.
I love your jigs. You might find turning a step into the spigot so it doesn’t bottom out in the chuck - pushing the step against the face of the chuck jaws - will give you better alignment and do without your spacer, and be easier on your tailstock 🤔😀
Good suggestion, thanks!
I think your determination is admirable. That being said, that was a beautiful setup.
Awesome.
at first i thought: "what kind of overengineered %&$% is that?" but it became clearer and clearer with every step that it is quite ingenious.. love it!
and it reminded me of one of the reasosn i subscribed to the channel: the ideas you come up with for "mass"-production.. :-) thanks for sharing, as always!
Thank you!
Ok 5000 ... that’d be a lot to make. Hah. Very cool though. Really love seeing all the jigs you make, especially the dowel texturized 3000. I’ve only got the 2000 mk1 so maybe I gotta upgrade now 🤣
Great tree and great jigs. By now canyon make a tree in 20 mins? 10 mins?
You still neeed to make a jig to hold a jig in a jig.;-)..great work man
Thanks 👍
Excelente mecanismo, muy ingenioso. Me encanta tu trabajo.
Gracias!
Just as an idea, why not bandsaw it into a pyramid instead of just a wedge at first? To speed up the initial turning (less to remove)
Very innovative setup, very creative idea. I would be interested in a video n how you built that.
Geez, I just got the Dowel Texturizer 2000 paid off and it's already obsolete!
Planned obsolescence.
Very, very very slick! =)
Thanks!
Pretty cool!
Excellent from start to finish. Curious what you might be making out of the band saw cut-offs.
What makes you so sure I have them all kept in a box instead of throwing them out like a sensible person?
Respect !!!
Wow!
Great work sir! Do you have a video and or plans available on how you made the jig?
Like your mechanism, not sure the router is needed for the first part of tree, I see the router being very useful on the groove. But overall, VERY NIce.
Great Video, Thanks. The spiral part at the end was pretty cool, but I could start with a rectangle piece and get to the christmas tree shape useing just a chisel and lathe. Maybe I would use the band saw to make my block. But I really want to know the name of that saw you used it the opening shot. It looks like it would be a good saw to cut pieces for segmented projects in a small shop.
The miter saw? It's a Bosch Glide 10"
Ingenious design and work... but as a journeyman machinist for 25 years, watching your long sleeves dance less than an inch from a spinning chuck I am cringing for the inevitable wrap up of your entire arm before you can find the off button!
Curious why you didn't try (or at least didn't mention) making two at once mirrored on the lathe. Could be wrong, but I'd wager it'd at least help with a number of complications (with a little added complexity), especially with stability. Plus it'd make it so you could more easily remove bulk stock with a second bandsaw cut for the wings (or whatever you wanna call them) rather than having to turn them off on the lathe.
It never occurred to me. I came at it from the thought of a more typical spiral jig that runs parallel to the lathe but putting it an angle and then realized I could make it simpler by having it pivot through an arc. You'd use a lot more wood as you wouldn't be able to nest the points together. For the potential 5000 ornament job that would be many thousands of dollars. I'm not sure if the gear can turn that far before the router runs into the right angle gear. You'd also have to remount the one on the tailstock end in the chuck and it's hard to get something mounted so that it runs perfectly true so that part. I'm not sure you'd gain enough time to make up for the extra wood, if it's possible.
Amazing precision, but I have to wonder at the point of all this. Looks like it took longer to make all the jigs than the time saved by actually making them.
It's about learning and scale. What you learn can be applied to the next piece you design, and doing the jigs mean you can scale your work to as many orders as you get... This year, next year, the year after that...
Personally I would probably try to find a way to do it with CNC
As John H says "I can well imagine the time you put in to designing it." !!!!!!! Couldn't you have cut the piece with tail stock intact then trim when finished? Nice work K man
Awesome
Thanks!
I made one of those, only I drilled the proper size hole in a apiece of steel and filed teeth in it.
muy bien!
Amazing. Your best video to date. I learn so much about doing small series with somewhat simple tool. So the 5000 deal didn't work out. How many did you sell?
I held off finishing any of them until now, so so far one.
@@krtwood auch. I really hope your hard work gets paid in the end. I'm a self employed woodworker myself and know how important it is to keep the money flowing in. If you were in Europe I would definitely buy a couple of trees to support you. Best regards. Rasmus from Denmark
I'm amused that your jig for drilling the hole in the base looks quite a lot like the jig the Christmas tree farm I go to uses to drill a hole in the bottom of the tree for attaching to the base -- the only difference is theirs is upside down compared to yours.
I can't believe those ornaments only cost US$8000 each!
My skeptical-eyebrow goes up when somebody titles their own thing as "clever", but in this case it's well justified. Very cool.
Did you see the runout in your tail stock, when you started the router cut?
It's from the tail stock extension and the piece not being perfectly centered to where the divot from turning between centers vs being in the chuck.
Will you be doing any deals on the dowel texturiser for Black Friday?
Get four Dowel Texturizer 3000s for only one extra payment!
What kind of wood do you like to use for these?
Hard maple. I tried soft maple but it fuzzed a lot more cutting the spiral, though the bit was already dull by that point.
Nice. There is an engineer in their somewhere.
Out of curiosity, could a 4th axis on a CNC do the same thing?
Not exactly, because the spindle can't rotate to follow the curve when doing the spiral. It would be better to do a straight taper.
@@krtwood I see what you mean - it couldn't do the curving "sweeping" motion that keeps the bit perpendicular to the curve - but it could definitely move up the curve while the 4th axis is rotating (rotate the whole thing 90 degrees). probably wouldn't be as clean though, since the whole profile would be cut be the leading edge of the mill/spiral bit
hate to bump the power on the lathe by accident
I'm pretty sure your tailstock shouldn't be wobbling about like that.
Just ordered one! I might place another order later for 5000; that ok? :)
Thank you, Charles. You can order as many as you like as long as the check clears and you don't mind waiting a year!
I was about to buy one, but the uncertainty of how much it will cost in duties to ship to Canada (as per your Etsy page) makes this unknown possibly out of my budget. If you can fix that, lmk. Sorry!
I put the listing up late last night with just US shipping available. Just added shipping to Canada for $8. There won't be any brokerage fees but you may have some tax.
I don't understand. Each pass is taking off the same amount of wood that a regular woodturning chisel would remove. This looks like a super complicated way of doing a fairly simple job
*THEN* I get to the spiral part and understand lol.