At the end of the day you are really paying for the mounts. They are charging you like $200 for them to make the mounts because all they did was source the actual stabilizer for probably less then the $50 it runs on Amazon.
I've been wanting one but wasn't tryin to pay 400 plus bucks. I enjoy diy projects so thanks for the video. I wonder if it would be a good idea to use blue loctite on the bolts when i do mine? Maybe not necessary since yours hasn't moved.
The spacer in the back is supposed to be on the bottom then the nut but with these brackets you can't do that it doesn't clear so it has to be done like you did it. What I am doing to compensate is to lower that back bracket by 1/2 inch so it lines up like the original design does. The only other option I seen was to leave it like you did and have the slight 1/2 angle or grind a little off the back bracket so it clears when rotating.
I do wish you would have had the camera man go in to the finish installation he was to far back a I couldn't see nothing 😂. Good job on making it work.
That looks identical to the universal one that comes with Ryker mods?? Is it and which size is that the 10 inch or 13. Also how have those brackets held up for you? Thanks for the info and links.
If you use those cheap screws that come with those brackets they strip out wright away if you need to take it off do not use or the other ones from amazon buy good screws i learned the hard way i had to cut the bracket off.
I recently bought a 2020 ryker. It seems like at highway speeds the steering is bouncy. Sorry can't think of another way to describe it. Would this help with that? I mean the steering is bouncy.
Hey kingjoffyjoe413 I was looking at your video on the stabilizer and I didn't see the link for the bolts cause i'm about to order this for my girl's ryker what size are those bolts
Great Idea and you saved like $150 from having to buy the brackets from Ryker mod & Slingmods!
I did the same thing and bought the same stuff. 2 months ago. Cost me a total of 45 euro. Thanks to Ali..
Great vid!!!! Anyway you can add some close up stills with the measurement tape? The angle did show very well.
Look at Bill Ramsey's video about the stabilizer he has a detailed video installing one
Great info, every part for the Ryker that is helpful seems like they charge way too much. $100 yes, $300+ nah.
At the end of the day you are really paying for the mounts. They are charging you like $200 for them to make the mounts because all they did was source the actual stabilizer for probably less then the $50 it runs on Amazon.
@@jerryturner3 ya, I seen the stabilizers for like $40 on Amazon, at least if they go bad, easy cheap replacement.
I've been wanting one but wasn't tryin to pay 400 plus bucks. I enjoy diy projects so thanks for the video. I wonder if it would be a good idea to use blue loctite on the bolts when i do mine? Maybe not necessary since yours hasn't moved.
The spacer in the back is supposed to be on the bottom then the nut but with these brackets you can't do that it doesn't clear so it has to be done like you did it. What I am doing to compensate is to lower that back bracket by 1/2 inch so it lines up like the original design does. The only other option I seen was to leave it like you did and have the slight 1/2 angle or grind a little off the back bracket so it clears when rotating.
You should tell people you have to buy two different Direction mounting clamps
damn i should of
Do you know where I can get the the mounting clamps
I do wish you would have had the camera man go in to the finish installation he was to far back a I couldn't see nothing 😂. Good job on making it work.
That looks identical to the universal one that comes with Ryker mods?? Is it and which size is that the 10 inch or 13. Also how have those brackets held up for you? Thanks for the info and links.
What kind and where could I find it
If you use those cheap screws that come with those brackets they strip out wright away if you need to take it off do not use or the other ones from amazon buy good screws i learned the hard way i had to cut the bracket off.
Facts
I recently bought a 2020 ryker. It seems like at highway speeds the steering is bouncy. Sorry can't think of another way to describe it. Would this help with that? I mean the steering is bouncy.
yes
Hey kingjoffyjoe413 I was looking at your video on the stabilizer and I didn't see the link for the bolts cause i'm about to order this for my girl's ryker what size are those bolts
2 inch
Are you leaving the fenders on?
no