Quick and Simple Oil Change for a 2010-2017 Chevrolet Equinox and GMC Terrain 2.4L EcoTec 4 Cylinder
Вставка
- Опубліковано 25 сер 2024
- Quick and Simple Oil Change for a 2010-2017 Chevrolet Equinox and GMC Terrain 2.4L EcoTec 4 Cylinder
In this video, we will show you how to change the oil on a 2014 Chevrolet Equinox with a 2.4L 4 cylinder engine. This process is simple and can be done at home with the right tools.
First, gather all necessary materials including a 32mm oil filter socket, ratchet, a new oil filter, a drain pan, and the 4.5 quarts of 5W-30 DEXOS oil for your vehicle.
Next, locate the oil pan and oil filter under the car. Use the oil filter wrench to loosen and remove the old filter. Place the drain pan underneath the oil pan and use a wrench to loosen the oil drain pan bolt. Allow the old oil to drain completely.
Replace the oil pan bolt and install the new oil filter, tightening it securely with the oil filter wrench. Fill the engine 4.5 quarts of oil, checking the oil level with the dipstick to make sure it is at the proper level.
Finally, start the engine and let it run for a few minutes to circulate the new oil. Check for any leaks and dispose of the old oil properly.
By following these steps, you can easily change the oil on your 2010-2017 Chevrolet Equinox with a 2.4L 4 cylinder engine and keep your car running smoothly.
Links
Just the Oil Filter: amzn.to/3IAoywm
Oil Filter and O-ring for the cap: amzn.to/3Qr6gQ2
Cap, Oil Filter, and O-ring: amzn.to/3X5FEXG
5-quart Oil: amzn.to/3vNQZzo
Oil Filter Socket :amzn.to/3CyVKR2
Olfa Knife: amzn.to/3Un7WMc
Mechanics Tool Set: amzn.to/3Klnxab
Jack and Jack Stand Combo
amzn.to/3nAFec1
or
Vehicle Ramps
amzn.to/3A3POgF
Some of these items can be purchased locally for a better price.
Disclaimer for DC Auto Enhancement
We are doing our best to prepare the content of this site. However, DC Auto Enhancement cannot warranty the expressions and suggestions of the contents, as well as its accuracy. In addition, to the extent permitted by the law, DC Auto Enhancement shall not be responsible for any losses and/or damages due to the usage of the information on our website.
By using our website, you hereby consent to our disclaimer and agree to its terms.
The links contained on our website may lead to external sites, which are provided for convenience only. Any information or statements that appeared in these sites are not sponsored, endorsed, or otherwise approved by DC Auto Enhancement. For these external sites, DC Auto Enhancement cannot be held liable for the availability of, or the content located on or through it. Our Privacy Policy was created by the Privacy
Policy Generator. Plus, any losses or damages occurred from using these contents or the internet generally.
2010 Chevy Equinox GMC Terrain
2011 Chevy Equinox GMC Terrain
2012 Chevy Equinox GMC Terrain
2013 Chevy Equinox GMC Terrain
2014 Chevy Equinox GMC Terrain
2015 Chevy Equinox GMC Terrain
2016 Chevy Equinox GMC Terrain
2017 Chevy Equinox GMC Terrain
TIP, pull the filter first, allow oil to drain into the sump. Drain the oil. Then install new filter. It will drain another 1/4qt out. After filling the engine, clear flood the engine for 20 seconds by holding accelerator down. This turns off injectors, and cranks the engine to fill the filter and pressurize the engine again.
Thank you so much
Thank you for watching!
Excellent socket recommendation! Video 📹 was very helpful 👌
Thank you! Thanks for watching and commenting
Thanks for sharing that socket! I need to get myself one. I wish I saw your vid before I changed my oil today. That filter kicked my butt! I tried with an adjustable wrench but it had no room to swing. Then I used a plumbers basin wrench. Less than ideal, chewed the plastic hex up a bit which looks hack. But it worked.
Big Elephant in the room question remains. Why why why do they make it so hard to get to? Knowing it's something that gets removed at every oil change, why didn't GM engineers make it easy to access? My 3.6 Pentastar in my 2014 Charger has it up high with no restrictions. Right there in the dead center at the top. So easy to access.
What about the o-ring for the oil filter? Each new filter comes with fresh o-ring. That said, I don't think the engine will self-destruct if the existing o-ring is used sometimes.
You are probably correct. It's good practice to replace them just in case. Thank you for watching and commenting!
Thanks for showing the Torque and actually taking it off after. Visuals help us all. I once had a local do mine and he topped off the fluids, he put tranny fluid into the brake line, in a short time no brakes. They replaced the entirs brake lines. I don't trust anyone.
I don't blame you for not trusting anyone. At least if you do it, you what you did. Thank you for feedback.
Use a 32 millimeter or a 1and a quarter inch ratchet wrench works great. All you have to do is measure and cut off the open end.
Good tip, thank you
Always replace the oRing on the black cap ( he skipped)
I agree, if possible, you should change the o-ring on the cap. When buying the filter there are usually different options and on of those options is with the o-ring. Thank you for pointing this out!
Hit the ratchet with your purse, that should do it for ya. 😂JK
🤣😂🤣
You didn’t even talk about the O rings on the oil filter !!!
We can discuss them here for those that read the comments. Do you have a question about them or a statement?
@@DCAutoEnhancement
You totally skipped over them. So if it was someone’s first time changing oil they might be saying what the heck ?