I discovered the wallipini concept here on this channel, and intend to implement a super charged version of this. It always good to hear about mistakes, so we can all learn together. Thanks!
I think changing it to an aquaponics system for the beds would be the Lamborghini model of a walipini. Oooo, do a windmill, or solar box piston for power.
I still think this system with the ability to move some beds out so that you can do a bed size worm and compost. Use your annuals for a composting, and another source of warmth. Another idea for that, use compost at in your cold sink. Or the book on it says to have a small animal pin there. He suggested rabbits for their heat output.
@@zachhodgson4113 Fantastic advice about the animals. Mine will also us an earth battery, because I want to grow coffee and cacao in missouri. Another enhancement is co2 creation. Almost all plants are choking to death at current levels of co2. The are a LOT of clever ways to make co2 for free. Animals are obvious, but I bet there are critters in the dirt. My favorite idea is to simply remove the nitrogen. It has the risk also concentrating the oxygen.
FYI, I got my foam insulation from the local hot tub store. I got their used covers for free. It insulated my walipini and kept the materials away from the dump.
Thank you so much for posting a follow up video. We all learn from mistakes, and I'd rather learn from yours before I make them myself. Helped me out a lot in my planning phase.
There is an animal like a woodchuck, that ventilates its burrows by having one exit higher than the inlet. This causes a natural airflow. from the lower to the higher. The higher the upper exit, the more the airflow. Mud palaces in the middle east used the same system to air-condition them. They put water out at night to freeze, and then they had an ice room that the air flowed through, naturally, and provided cool air through the building. .
Your walipini resembles the front design of an earth ship. It also uses the hot air raising to pull conditioned air into the structure. Very interesting design.👍👍
Water stores heat real fast but it also dumps the heat just as fast. That’s why it’s used in radiators. Masonry (rocks,concrete, brick and sand etc. absorb heat slowly and release it slowly so you’ll be much better off filling your drums with masonry and if you use the drums to collect water then fill them with gravel and then add the water around the gravel. I built an earthship with reinforced concrete walls ( I don’t trust tire walls in an earthquake). Three of the walls are earth bermed and the south wall of the house is also the north wall of the green house that runs the length of the house. All day this Trombe wall slowly collects heat and then slowly releases it all night back into the greenhouse as well as into the house. Water drums loose all their heat in just a few hours. I put radiant heat in the house but have never used it. Instead we use a couple of small electric heaters to heat 1200 sq ft. We live in zone 5. Word to the wise, if you use sloped glass in the green house you need to be able to remove it in the summer or open it up or shade it. It gets too hot if you don’t. Also earthships take 50 to100 percent more labor than conventional homes do. Everything on an earthship is custom so it takes forever.
You bring up some good points but I don’t totally agree with your premise. Although water can absorb and release heat quickly, you can manipulate the design to control the rate of dissipation. The point is, water holds more energy than any of those other recommendations you gave. If you look at total energy balance water is the best of the options you mentioned. No amount of design manipulation can increase the specific heat of sand and gravel to match that of water.
I didn’t know that. I wonder why they use sand then in sand batteries rather than water. Sand stores the heat for the entire winter with very cold temperatures outside in Scandinavia? I think that water would loose the stored heat much much faster than that. Other than insulation (which they use with sand batteries), how would you control the heat from leaving water?
Sand has many other advantages. It’s cheap, it’s noncorrosive, it won’t freeze, and it has air pockets in between each grain which in itself is an insulator. Additionally, there is no chance for leaks, evaporation, or acidification. In other words, it’s perfectly stable for thousands of years. Sand, gravel, or rock is probably the best choice when space is no issue. However, I accepted all the disadvantages of water because space was an issue for me. I wanted Maximum heat storage in minimum space so I could use the rest for growing. And yes, the way to limit the rate of heat dissipation is insulation. Same as they would for sand batteries only more, which is yet another disadvantage of water.
Great follow-up video. Thanks for doing this. It's much more engaging to listen/watch a video than to scroll through all the comments to see if others have the same questions. In the same breath, I sure appreciate the community around all the good people here sharing their thoughts and plans. You bring together good people. peace and health everyone.
I appreciate your openness to share. I am building a similar system this summer. We are going 100% off grid. I appreciate learning from your trials and errors. Peace.
@@ADifferentWay That's great. I look forward to seeing your transformation. We decided to install both solar and wind. Many times, when we have overcast skies, we have plenty of wind. CHeers! BM
This sounds way better than just a conventional greenhouse. We just bought a house and closing on it by the end of this year. We were planning on building a south facing greenhouse come spring time that we would be able to use next year, but I think that the Walipini is a much more efficient / better idea. Looking forward to seeing all of these improvements implemented and how to improve the design even further.
In terms of year-round production, this is definitely a great option! We are in the process of building our second walipini at our new property now. It’ll be quite a bit different, but there will also be similarities. The basic idea is to tap into that geothermal heat source to stabilize temperatures.
Your timing could not be more perfect; I was inspired by your first video to try my hand at a walipini, and I'm starting the digging tomorrow! Thanks for the update and the great information.
Great work. Thanks for scripting, recording, editing, posting, and sharing so well. When breaking up into fewer barrels per "tank", it might be safer to plumb every third barrel into a "tank". This would yield 3 separate, redundant tanks of 5 barrels each with a 16th sediment/distribution tank. Losing 1 tank would still leave 66% of the heat from the other 2 tanks nicely spread out. Applying the same redundancy to the irrigation side could save every bed if each crop row from walk aisle to barrel bank was serviced by 2 drip lines from independent tanks. A tank failure would then leave 1/3 of the rows with 100% planned water and 2/3 of the rows with 50% planned water until the tank failure gets discovered.
A much better design would be place plumbing 2" off the bottom on the side of each barrel. There are flange fittings available that are designed exactly for that use.The individual valve idea is a good as well. 50 gallon of water is approximately 417 pounds. Barrel diameter is approximately 26 inches so A= π times r2 . So approximately 3.68 sq feet bottom of barrel to distribute 417 pounds. That works out to less than 114 pounds per square ft. That's less than the weight of most people standing on the ground. No problem compacting to that spec. Barrel diameter and gallon capacity varies with type of barrel used so above calculations may need to be adjusted.
Your proof of concept Walipini has been very informative. I have been working on a design for our Passive Solar & 6th Grade Science Concepts home & attached Greenhouse. Our ideas are a combination of houses past & present plus Walipini, Chinese Greenhouses, underground Thermo Tubes and a Passive Solar/Solar Trombe Wall. Even with a computer design program and a big tote fully of Legos, the design has been reconfigured many times over. We have finally reach the stage where the Draftsman will fine tune the design and combine it with the environment. Thanks for doing the honest videos and adding the "Could have, Would have, Should have" items and information. Good Lucky & Planning with your Walipini 2.0
You could use thermal reflective sheeting to the underside of the roof so increasing the light and thermal resistance. The thermal sheeting is fairly cheap.
Think about ICF block foundation for your next design. Great insulator with all the strength of concrete. Could incorporate it into a shelf for your waterweight issue too. In the middle of a passive greenhouse in Maine myself. Loved your info, Thanks!
I love your approach of conception and the way you go through issues. I'm french myself and looking forward to build a kind od walipini put against te south wall of the naturel materials post and bims house i've been building during the past years. I feel like after you've started building for you're own, and got the knoledges, tools and skills it is hard to stop. Chears.
A system is only as robust as its weakest element. In this case PVC piping under temperature & H2O pressure, it just couldn't take it. Breaking it up into smaller segments will reduce H2O waste but it still won't reduce wear on the PVC. I'd seriously consider upgrading that portion of the wallipini to metal from PVC. Ideally copper. In my view we never scrimp on the important stuff. Thanks so much for posting and best of luck dealing with the heat loss and water system repairs while winter is still hanging around !
Thanks for the great videos and info. Voss Farms Colorado normally grows outdoors (hops, trees, veggies)... a Walipini has been planned for years.. hoping that 2024 is the year I get to it. :)
Nice info, thanks. Maybe you could extend the inflow pipe under the water level of the first barrel to prevent wind. I don't see the need to run the water line under the weight of the barrels or under dirt for that matter. Can shut off the water supply to to the line and let it drip dry if freezing is possible.
Amazing! Thank you for sharing! Its a beautiful design :) I reckon when the barrels are working without leaks, the space above them would hold a significant amount more heat. Maybe a shelving unit which takes advantage of the space above them and along their fronts could be a functional nice looking addition.
I was just thinking about the greenhouse that I have been wanting to build. Have many of the materials already on hand....all that just got put on hold, as you have shown me a better way. In fact I was also, just this evening, looking at a south facing slope on my property, and wondering how I could utilize that area, maybe with some excavation and a retaining wall??? Looks like the retaining wall is going to be below grade now, and a walipini built on top!
First off, amazing unfo. Thank you for these videos. I would be super interested in a grow schedule and when you turn over the beds/ what you plant when.
Honestly, I grew whatever struck my fancy each season. I didn’t necessarily have a schedule. The late winter, when I started my seed trays for the outdoor garden, I was often left with leftover seedlings. Typically, I would simply add them into the walipini bed. I generally had a quick, clean out/add new compost in the late winter, just before starting the spring garden in there, and then we would often finish the harvesting around July, let it just lay dormant while we focused on the outdoor garden at that time of year, then in August, I would do a very thorough clean up and restart For the fall and winter season inside the walipini.
Thank you for the kind words. Stay tuned to our channel, as we will soon be announcing the release of our a Walipini design and construction guide book! We’re very excited about this project.
Here's an idea. A 5 gallon bucket with an over flow at 16 in. would be much easier to clean out. Just put the bucket before the first barrel. Perhaps two 5 gallon buckets to catch sediment, would be ideal?
True, but the heat transfer is minimal unless you have a large collector. An actual drop of water does not spend enough time on the collector to gain much heat. In addition, when it’s raining, the sun is not shining.
Pitch. Spruce pitch. Colder it is, harder it is. Great for patching or sealing especially in contact with water. Mother natures fiberglass. Now, in contact with heat it will become soft. One way to decree the material heating up is rubbing white ash into it, wich i feel does something with the alkalinity of ash to the pitch similar to lime- i have not used cooked ash wich i feel would perform bettter. Harvesting pitch- to get nice clean pitch, heat in a container and pour through cheese cloth, or a cotton t-shirt.
I know you mentioned the reason you cover the back during the summer, but do you think the ideas of having the roof either at one angle or two, but both being towards the sun and both having the back wall higher for dirt would be better?
I’m not sure I fully understand your question. However, another reason for the roof angling down in the back is to reduce air space in the walipini. It allows the thermal mass to more efficiently heat that smaller air space. additionally, raising that back wall would require about 10 times more dirt in the back with a steeper slope and potential erosion.
I live in the Pacific Northwest, near what we call the convergence zone. I get very little sun most of the winner. I've found that without the Sun the greenhouse is not self sufficient. Looking to move back to the mid west. This will be one of my first projects.
Thank you for sharing your information on what goes wrong which is a great help. I look forward to seeing your new projects. I am off grid so this looks very workable.
Check out flexible PVC pipe, comes in different sizes and comes in a roll. Uses standard fittings and glue, best is it flexes to absorb shifting and settling and installs easily between fixed objects due to its flexibility
Really enjoyed the video especially what you learned. I'm at 43 lat in Wisc but wondering about applying these principles with our without the Russ Finch airflow system. Keep up the greaty work. Love the proof of concept zero energy .
Interesting fact you mentioned. Polycarbonate only lasts ten years. Didn't know that. As for your PVC issue. There is a flexible PVC we use in the pool industry that will move with the ground movement.
A clear gauge is a good idea, but if the barrels are connected, you only need a gauge on one of them. In my design, they naturally leveled across all 30 barrels.
Use a thick thermal blanket at night when it is cold. That would help with heat loss. You should add the thermal pump system for your home build. That would help there for the heat and cold loss of a home.
Great video contents and presentation. It would be nice to see what you come up with for your new house, but wonder how you will protect artwork, books, piano, etc. from the direct sun? Maybe a sunny hallway where some plants grow, and the rest of the house with traditional walls?
This was an older video, and our new home is well into the build at this point. The new house is designed to be passive solar, so direct sunlight only enters for a small portion of the year, during winter. Once completed, we can use drapes/blinds to control the suns ability to affect things on our walls… Just like any home. If you check out our construction playlist, or our starting over playlist, you can actually see the house being built.
You can use an additional compost heating 'system', that doesn't need gas or other heating. It's different than the sun, but still natural, and there are some good ideas to be found on the internet. You could even attach the water from the tanks to connect by pvc pipes into your compost, or just put compost at the back of the walapini and let it heat your greenhouse using the wall.
There is a great video called “Oranges in the snow” on UA-cam. It’s similar to yours but it uses geothermal energy. We are looking into it for our property.
We’re working on walipini 2 now, which is actually attached to our new house. We are basing on the previous design, but going with concrete for thermal mass, which allows us to run a double row of beds-one on each side of the walkway.
@@ADifferentWay don't get enough wet from sky anymore to justify any run off irrigation. Will just use barrels as heat battery. Thinking of air flow compost behind barrels in winter for a second source of heat. Barrels will be the outer wall. Saw a chap on UA-cam from SC doing that.
If you haven’t yet, be sure to consider picking up our book, Walipini Design and Construction. A link is listed in the info section of the video. It contains all the intricate details. You really need during your planning stage. It also has an entire section on what we will do differently, and the things that didn’t work quite so well, which allows you to learn from our mistakes!
I am really impressed with your design; especially your revisions after using it for over 5 years, that really says a lot about the longer term viability of it. I think I've made the decision to build one like it at this point. I'm sold. It's the swiss army knife of greenhouses/hoophouses/hothouses/etc. and suits my needs perfectly. Did you ever upload the design? Even the rough copy would be worthwhile. You've really saved me and likely a lot of other people a lot of trial and error and design changes, and probably made my garden better already thanks to the two videos I watched about your walipini. Thank you sincerely.
The only design we’ve posted so far is what was initially seen in the first video. We do have plans to create some type of booklet with far more details in the future, do I can’t give an exact date at this point. We’re in the process of building our second walipini, and we’re hoping to wait until we can give a comparison.
@@ADifferentWay : I was going to ask the same question. Congratulations on building Walipini v. 2.0! When will version 2 be completed? I am excited to see that video and what improvements you have made.
I have to put a lot of thought into that one. Typically a root cellar you’re trying to cool quickly in the fall and then maintain a constant temp throughout the winter. Whereas the walipini is trying to hold that summer warmth as long as possible and capture solar heat throughout the winter. Not to say it can’t be done, but there are some opposing functions going on there.
You mentioned “clean out” the barrel. I’m unsure of what you intend, but (my father ran a city municipality) when he said this, it meant a clean out valve and purge...think fire hydrants in the fall or spring. I’d have purge valves set before the connection to the last filter to simply purge (lowest point) the barrels on occasion.
fantastic stuff! really cool and glad you're experimenting and trying new things. Cool that you're not using any electricity too. This makes me one to build one and grow peppers year round in Indiana! Will be following!
Thank you so much!!! I was just about to start my Walipini when I found the first video and then this one. It was just the information I needed to share with my husband and heavy equipment operator who felt a little in the dark concerning the plan. Now he can better visualize the outcome. The video expanded my knowledge greatly also even though I have been studying and preparing for this project for a quite a while. I only have one minor question. How much difference would the heat absorption be if the barrels were painted black? Again, I appreciate you guys so much!!!
Black does a great job of absorbing heat, but other colors do offer some benefits. It really does depend on the design of your walipini and how the sun enters. I would encourage you to do a little research on that. If you would prefer it all in one source, consider picking up a copy of our book off of Amazon. It goes into much greater detail than the videos, but it’s also written to be very easy to understand so the average person can DIY! You can find it in the info section under the video. Hope that helps!
Have you ever heard of Elliot Coleman and his ideas for season extension in unheated high tunnels I think it’s definitely possible to use in this system too
I don’t know much about Maine, however, the location of this walipini could get into the single digits for a couple of weeks during the winter, with periodic spurts in the negatives and windchill‘s around -30 or 40°F. Summer temperatures could easily reach 100 for a couple of weeks at its peak, with humidity levels around 98%. We definitely have both extremes.
When we initially became interested in the Walipini concept, we consulted the study published by the Benson Agriculture and Food Institute. As planning progressed, my engineering students at the US Air Force Academy developed the idea as an assignment. They drew it up, and then we fine-tuned it based on latitude and sun angles. Although we did eventually read Oehlers book, I’m not surprised that the design is similar, as many walipini and pit greenhouse designs resemble each other. It’s basic engineering and passive solar design.
They have definitely been one of our biggest issues in this design. Voles are the biggest problem, since they actually eat the root vegetables. Mice are seen on occasion, though they aren’t a huge problem since they don’t eat too much. We just have to be consistent about setting traps, flooding tunnels, and keeping any holes sealed up. We are currently designing our second walipini at the new property, and we are going to try using a complete concrete structure this time, with raised beds inside. Although it has downsides of its own, we’re hoping it will eliminate this problem. Will let you know as things develop!
If my research serves me correctly I am at 48.8 N Latitude and growing zone 5B-ish as well. My question is, would the color of barrel you used in rain collection have much effect? i.e. black drums opposed to white drums. Would a black drum collect the solar energy more so than a lighter colored drum? and on the flip side would it supply heat any less efficiently or more efficiently than a lighter colored drum? Also, correct me if I'm wrong, but I assume you used a food grade plastic drum? Great video and thus far the most informational. I look forward to one day building my own using your tips and tricks. Keep it coming and God bless.
The color is important. The problem with black is that it does not reflect any light at all. The backside of those plants need reflected light. The white drums would reflect a lot but absorb very little solar radiation and thus not heat up well. A blue or red barrell would be ideal. And yes, they are food grade.
If you read about the Chinese greenhouse you will be surprised about all its advantage especially if your about the latitude 40. higher north you are and less interesting is the Walipini greenhouse since the angle of the sun is lower and do not illuminate the ground of the walipini as well as if the ground was at the same level as the beginning of the glazing. A really good technique that does not require any energy to operate is: 1. Dig a trench of 6-8 feet deep inside the greenhouse perimeter; 2. put horizontal R20 insulation panels all around (this will prevent the cold from the ground outside from cooling the soil inside the greenhouse, which benefits from the warmth of the soil deep down. 3. place the excavated soil back into the trench to hold the panels in place, and compact the soil well at every foot if possible. You will end up with a warm soil perfect for the plants roots even if the air is under the freezing point.
Thanks for generously sharing the successes and opportunities for learning gathered from your working experiment. I 've no gardening experience myself, but am curious how you plan to rest or replenish the soil in something that's seems to be in constant use.
Great question! Most of the walipini bed gets at least 2 short breaks through the year, as we harvest different sections at different times, but generally replant it after 1/3-1/2 is empty. We also bring in plenty of compost before replanting, to ensure fertility stays high.
I’m wondering if there is a way to use the -liquid- water in the Walipini to prevent plants freezing. E.g. can you leverage the heat transfer of the water converting from liquid to solid ice to prevent plants freezing? Maybe even misting with water from the barrels which is above freezing?
Properly designed, freezing would not be an issue. Realize the only time in nearly 5 years that the temperature dropped below freezing was when we had the joint leak and lost so much of our water, in the midst of the extreme cold and cloudy days. That is definitely an exception rather than a rule. A much better option would be prevention--design the barrels correctly and the heat stored inside the water barrels should protect the plants just fine.
Your misting concept is something I have intended to play with in addition to cloth over simple #9 wire to grow lettuce in Nebraska. We can get 95 degrees in June or September so trusting in timing is not always manageable. Misting mixed with shade is my hopeful method. I can see what you mean for warmth, but you’d need plumbed in water and once you start, you can’t stop. Consider how temporary that is for most plants in a greenhouse setting. It could work for a hard cold for a week though. This -41 here...was near impossible. I’d even consider owning concrete blankets for something this nuts if it weren’t a once ever decade problem.
I suppose you could try the vertical black strings, but because snow removal was so easy and accessible, I didn’t worry about it. The steepness of the front shed most of the snow naturally. I only had it sit on there when I had very heavy snow or wet snow.
Wawo what a gem you are, i am going to make such walipini , i have wood and stones at my land, rest i will have to buy. And will surely send you pictures. Before that i need to follow you on regular basis. I think you have demonstrated all work you have done on your chanel? I am from pakistan.
Glad you liked it! Yes, our channel shows much of what we do, but if you want more details specific to the walipini, be sure to check out our book in the info section below the video! You can find it on Amazon, and it has all the details you need to build a working structure specific to your region. Hope it helps!
Would it be a good idea for a solid base under the strip of barrels,to use the heated thermal mass "bench"of a rocket stove mass heater? I mean it could be solid concrete walls or cinder blocks for the sides,enclosing your heating/exhaust tubes along with the gravel and clay thermal mass, instead of just using up space,it would just be the right height to set the barrels in the back and maybe even make it wide enough to sit your grow beds on providing warmth to your soil and root system as well. If youre familliar with rocket stove mass heaters,they use mininal fuel wood,and you only need a small fire at night when you expect really cold weather. That would recharge the heat in the water barels as well. Would there be any downsides to doing this?
That would be a great idea. However, that’s a lot of work. If you’re in a northern climate, definitely worth it. If you’re south of 40° latitude, I don’t think you’ll need it.
I found you video as I searched for walipini information. I know this video is old, so information has changed. I have subscribed to your channel because I want to learn more details. I love your approach. Have you put together your written plans? I live at 46.59 degrees north at an elevation of over 1500 feet. We do not get as much artic blast as you get in the Midwest so this may work even better for me. I will check for more recent videos from you on this topic. Good work!
Welcome to the channel! We haven’t put the plans together yet since we’ve been so busy building our new facility, however we are hoping to have it done within the next few months! Stay tuned!
@@ADifferentWay Thank you for getting back to me about your plan availability. We are too far down the pike as we are building ours but thank you anyway.
Aside from slightly added cost and time, what's the reason for three or four valves versus, say, a valve between each barrel, especially if the primary driving force is minimizing the number of barrels requiring draining during settling-induced leakage?
We have a couple of our construction videos that show the concrete base and 1/2 walls being poured, but during our construction phase for the entire farm, the designated walipini area has been very multipurpose - it has served as a tool shed/workshop, paint booth, and currently serves as a clothes drying area to keep our lines out of the cold, wet weather😁. It will be a bit before we get it finished as we just have too many other projects that have higher priority.
Whenever we expected a rain, we would simply turn on the watering tubes to irrigate the beds. I think we only had it overflow one time when we forgot to turn on the valves. But, it simply overflowed into the back of the bed, so no big deal.
I have a question does side what is benefit of wall below? If we put stones instead? What will be impact, by considering that we will grow mushrooms too in bottom, thanks
I’m not sure what you’re referring to when you say wall below. However, anytime you can substitute rock, brick, or concrete for wood that is going to benefit you. Better thermal mass and no rotting. Additionally, if you want to grow mushrooms, those spores will impregnate the wood and you’ll have mushrooms where you don’t want them. With stone or concrete that shouldn’t be an issue.
It could be an option, but there are so many variables, it would really depend on the situation. Is it south facing? What are the dimensions? What is the depth? Are just a few of the questions that should be explored.
Not a dumb question. I’d prefer to find someway to double that back wall and have water in the wall as opposed to in the barrels. That might be a little complicated though. Adding insulation wouldn’t really help much because you’re still trying to get the thermal stability of the ground, which is behind that wall. if it was outside air behind that wall, you would definitely want to insulate more.
Yes, you could, but I use that attic space for starts in the spring time when the sun is low enough to penetrate the front wall and still make it to the back wall. The slope on that back ceiling is 30°, which means the sun goes all the way to the back for about 4 weeks. However, you could block off a portion of that, maybe 4 feet and definitely create a small attic space with insulation. Wouldn’t lose much grow space, but would definitely limit heat loss and decrease dead space.
@@ADifferentWay I really like your design but it looks like you are on a fairly level area, I am on an approximate 4/16 hill, do you think it would work with 4ft down on north side go 6feet south then go down 4 more feet go 4 feet south then up 4 foot to grade then 6 more space added?
Actually, this structure lies on a north slope, not ideal. I used the excess dirt from the dig to build up the back wall, because the actual terrain falls away. Your idea could absolutely work, but it’s all dependent on sun angles. I describe those angles in the book.
I really enjoyed the first video, and i can't get the idea out of my head, i really appreciate your work and i hope you will follow this path of walipinis designs, sorry for my bad english, take care in Illinois ! From France, do u believe 1 meter of gravel can be enough to prevent water bed ?
One more question, do you ever run like on water during the winter? You mentioned having to decide between heat and water, does that mean you run out of water?
No, I don’t run out of water, but I will haul water in the winter sometimes and fill through the side pipe. That allows me to water the plants without letting the tanks get too low.
Fantastic vid. Great analyses and explanations. If you could would you provide electricity (grid or solar) for moving air? Would you add a woodstove for emergency heat?
Certainly, you could, but we chose not to for this particular structure. You have to balance the benefits/costs of gaining maximum production potential at higher costs, or losing a little production potential, but decreasing costs. It really boils down to individual choice/needs/situation.
I discovered the wallipini concept here on this channel, and intend to implement a super charged version of this. It always good to hear about mistakes, so we can all learn together. Thanks!
I think changing it to an aquaponics system for the beds would be the Lamborghini model of a walipini.
Oooo, do a windmill, or solar box piston for power.
I still think this system with the ability to move some beds out so that you can do a bed size worm and compost. Use your annuals for a composting, and another source of warmth.
Another idea for that, use compost at in your cold sink. Or the book on it says to have a small animal pin there. He suggested rabbits for their heat output.
@@zachhodgson4113 Fantastic advice about the animals.
Mine will also us an earth battery, because I want to grow coffee and cacao in missouri.
Another enhancement is co2 creation. Almost all plants are choking to death at current levels of co2. The are a LOT of clever ways to make co2 for free. Animals are obvious, but I bet there are critters in the dirt.
My favorite idea is to simply remove the nitrogen. It has the risk also concentrating the oxygen.
FYI, I got my foam insulation from the local hot tub store. I got their used covers for free. It insulated my walipini and kept the materials away from the dump.
Thank you so much for posting a follow up video. We all learn from mistakes, and I'd rather learn from yours before I make them myself. Helped me out a lot in my planning phase.
There is an animal like a woodchuck, that ventilates its burrows by having one exit higher than the inlet. This causes a natural airflow. from the lower to the higher.
The higher the upper exit, the more the airflow.
Mud palaces in the middle east used the same system to air-condition them. They put water out at night to freeze, and then they had an ice room that the air flowed through, naturally, and provided cool air through the building.
.
Your walipini resembles the front design of an earth ship. It also uses the hot air raising to pull conditioned air into the structure.
Very interesting design.👍👍
Water stores heat real fast but it also dumps the heat just as fast. That’s why it’s used in radiators. Masonry (rocks,concrete, brick and sand etc. absorb heat slowly and release it slowly so you’ll be much better off filling your drums with masonry and if you use the drums to collect water then fill them with gravel and then add the water around the gravel. I built an earthship with reinforced concrete walls ( I don’t trust tire walls in an earthquake). Three of the walls are earth bermed and the south wall of the house is also the north wall of the green house that runs the length of the house. All day this Trombe wall slowly collects heat and then slowly releases it all night back into the greenhouse as well as into the house. Water drums loose all their heat in just a few hours. I put radiant heat in the house but have never used it. Instead we use a couple of small electric heaters to heat 1200 sq ft. We live in zone 5. Word to the wise, if you use sloped glass in the green house you need to be able to remove it in the summer or open it up or shade it. It gets too hot if you don’t. Also earthships take 50 to100 percent more labor than conventional homes do. Everything on an earthship is custom so it takes forever.
You bring up some good points but I don’t totally agree with your premise. Although water can absorb and release heat quickly, you can manipulate the design to control the rate of dissipation. The point is, water holds more energy than any of those other recommendations you gave. If you look at total energy balance water is the best of the options you mentioned. No amount of design manipulation can increase the specific heat of sand and gravel to match that of water.
I didn’t know that. I wonder why they use sand then in sand batteries rather than water. Sand stores the heat for the entire winter with very cold temperatures outside in Scandinavia? I think that water would loose the stored heat much much faster than that. Other than insulation (which they use with sand batteries), how would you control the heat from leaving water?
Sand has many other advantages. It’s cheap, it’s noncorrosive, it won’t freeze, and it has air pockets in between each grain which in itself is an insulator. Additionally, there is no chance for leaks, evaporation, or acidification. In other words, it’s perfectly stable for thousands of years. Sand, gravel, or rock is probably the best choice when space is no issue. However, I accepted all the disadvantages of water because space was an issue for me. I wanted Maximum heat storage in minimum space so I could use the rest for growing. And yes, the way to limit the rate of heat dissipation is insulation. Same as they would for sand batteries only more, which is yet another disadvantage of water.
This was incredibly well put together, both the first section and the reflective section . What an amazing source of information and details.
Great follow-up video. Thanks for doing this. It's much more engaging to listen/watch a video than to scroll through all the comments to see if others have the same questions. In the same breath, I sure appreciate the community around all the good people here sharing their thoughts and plans. You bring together good people. peace and health everyone.
No problem. We’re glad you found it helpful!
I appreciate your openness to share. I am building a similar system this summer. We are going 100% off grid. I appreciate learning from your trials and errors. Peace.
Hope it helps! We are eagerly anticipating our move to make our entire property off-grid. We are in the design phase now.
@@ADifferentWay That's great. I look forward to seeing your transformation. We decided to install both solar and wind. Many times, when we have overcast skies, we have plenty of wind. CHeers! BM
You said it yourself, it's a test project. That being said, that was the perfect time for that settling issue to arise.
This sounds way better than just a conventional greenhouse. We just bought a house and closing on it by the end of this year. We were planning on building a south facing greenhouse come spring time that we would be able to use next year, but I think that the Walipini is a much more efficient / better idea.
Looking forward to seeing all of these improvements implemented and how to improve the design even further.
In terms of year-round production, this is definitely a great option! We are in the process of building our second walipini at our new property now. It’ll be quite a bit different, but there will also be similarities. The basic idea is to tap into that geothermal heat source to stabilize temperatures.
Your timing could not be more perfect; I was inspired by your first video to try my hand at a walipini, and I'm starting the digging tomorrow! Thanks for the update and the great information.
That's awesome!
If interested, we wanted to let you know our Walipini building guiding is finally available! www.amazon.com/shop/adifferentway/list/2JRI58ITC5AM0
Thank you for one of the most real, raw, and helpful walipini videos.
Glad it was helpful!
Great work. Thanks for scripting, recording, editing, posting, and sharing so well.
When breaking up into fewer barrels per "tank", it might be safer to plumb every third barrel into a "tank". This would yield 3 separate, redundant tanks of 5 barrels each with a 16th sediment/distribution tank. Losing 1 tank would still leave 66% of the heat from the other 2 tanks nicely spread out. Applying the same redundancy to the irrigation side could save every bed if each crop row from walk aisle to barrel bank was serviced by 2 drip lines from independent tanks. A tank failure would then leave 1/3 of the rows with 100% planned water and 2/3 of the rows with 50% planned water until the tank failure gets discovered.
Thank you for the Bluejays !!!
You have a great system and you learn from mishaps. Congratulations!
A much better design would be place plumbing 2" off the bottom on the side of each barrel. There are flange fittings available that are designed exactly for that use.The individual valve idea is a good as well. 50 gallon of water is approximately 417 pounds. Barrel diameter is approximately 26 inches so A= π times r2 . So approximately 3.68 sq feet bottom of barrel to distribute 417 pounds. That works out to less than 114 pounds per square ft. That's less than the weight of most people standing on the ground. No problem compacting to that spec. Barrel diameter and gallon capacity varies with type of barrel used so above calculations may need to be adjusted.
Cool Walipini. Thanks for all the details
Your proof of concept Walipini has been very informative. I have been working on a design for our Passive Solar & 6th Grade Science Concepts home & attached Greenhouse.
Our ideas are a combination of houses past & present plus Walipini, Chinese Greenhouses, underground Thermo Tubes and a Passive Solar/Solar Trombe Wall.
Even with a computer design program and a big tote fully of Legos, the design has been reconfigured many times over.
We have finally reach the stage where the Draftsman will fine tune the design and combine it with the environment.
Thanks for doing the honest videos and adding the "Could have, Would have, Should have" items and information.
Good Lucky & Planning with your Walipini 2.0
Thank you very much for the great ideas, You are making the world a better place for those who will use your ideas , God bless.
Couldn't have said it better. Thank you.
You could use thermal reflective sheeting to the underside of the roof so increasing the light and thermal resistance. The thermal sheeting is fairly cheap.
Think about ICF block foundation for your next design. Great insulator with all the strength of concrete. Could incorporate it into a shelf for your waterweight issue too. In the middle of a passive greenhouse in Maine myself. Loved your info, Thanks!
Very interesting. Thank you for sharing. Lots of new ideas for our next one and won't have to make some of those mistakes. Much appreciated info.
I love your approach of conception and the way you go through issues. I'm french myself and looking forward to build a kind od walipini put against te south wall of the naturel materials post and bims house i've been building during the past years. I feel like after you've started building for you're own, and got the knoledges, tools and skills it is hard to stop. Chears.
A system is only as robust as its weakest element. In this case PVC piping under temperature & H2O pressure, it just couldn't take it. Breaking it up into smaller segments will reduce H2O waste but it still won't reduce wear on the PVC. I'd seriously consider upgrading that portion of the wallipini to metal from PVC. Ideally copper. In my view we never scrimp on the important stuff.
Thanks so much for posting and best of luck dealing with the heat loss and water system repairs while winter is still hanging around !
What a inspiring project. It's amazing to see what's possible even in cold areas. Good luck with further developments, Cheers from Norway :)
I have heard that someone put a reflective surface under the north roof to throw back sunlight in particular when the sun is low
Thanks for the great videos and info. Voss Farms Colorado normally grows outdoors (hops, trees, veggies)... a Walipini has been planned for years.. hoping that 2024 is the year I get to it. :)
Nice info, thanks. Maybe you could extend the inflow pipe under the water level of the first barrel to prevent wind. I don't see the need to run the water line under the weight of the barrels or under dirt for that matter. Can shut off the water supply to to the line and let it drip dry if freezing is possible.
Amazing! Thank you for sharing! Its a beautiful design :)
I reckon when the barrels are working without leaks, the space above them would hold a significant amount more heat. Maybe a shelving unit which takes advantage of the space above them and along their fronts could be a functional nice looking addition.
very smart and very brave! Great inspiration.
You guys are awesome
I was just thinking about the greenhouse that I have been wanting to build. Have many of the materials already on hand....all that just got put on hold, as you have shown me a better way. In fact I was also, just this evening, looking at a south facing slope on my property, and wondering how I could utilize that area, maybe with some excavation and a retaining wall???
Looks like the retaining wall is going to be below grade now, and a walipini built on top!
First off, amazing unfo. Thank you for these videos. I would be super interested in a grow schedule and when you turn over the beds/ what you plant when.
Honestly, I grew whatever struck my fancy each season. I didn’t necessarily have a schedule. The late winter, when I started my seed trays for the outdoor garden, I was often left with leftover seedlings. Typically, I would simply add them into the walipini bed. I generally had a quick, clean out/add new compost in the late winter, just before starting the spring garden in there, and then we would often finish the harvesting around July, let it just lay dormant while we focused on the outdoor garden at that time of year, then in August, I would do a very thorough clean up and restart For the fall and winter season inside the walipini.
Have you considered heating with compost? Compost can get pretty hot. Also, you could pump water against gravity without electricity with a water ram.
Fascinating - really appreciate the follow up. You are a very eloquent man!
Thank you for the kind words. Stay tuned to our channel, as we will soon be announcing the release of our a Walipini design and construction guide book! We’re very excited about this project.
What a fantastic video! Very informative, and inspiring!
Good morning!
What a great concept.... Thanx for sharing!!!
nice sweat shirt love the Walipini
Here's an idea. A 5 gallon bucket with an over flow at 16 in. would be much easier to clean out. Just put the bucket before the first barrel. Perhaps two 5 gallon buckets to catch sediment, would be ideal?
Definitely an idea that would likely work!
You could put a black rainboard angled towards the sun maybe to catch even warmer rainwater?
True, but the heat transfer is minimal unless you have a large collector. An actual drop of water does not spend enough time on the collector to gain much heat. In addition, when it’s raining, the sun is not shining.
Wow..this is incredible...sigh..🤗 💕
Going to build one of these in Northern Maine. Thanks for the idea
Pitch. Spruce pitch. Colder it is, harder it is. Great for patching or sealing especially in contact with water. Mother natures fiberglass. Now, in contact with heat it will become soft. One way to decree the material heating up is rubbing white ash into it, wich i feel does something with the alkalinity of ash to the pitch similar to lime- i have not used cooked ash wich i feel would perform bettter. Harvesting pitch- to get nice clean pitch, heat in a container and pour through cheese cloth, or a cotton t-shirt.
I know you mentioned the reason you cover the back during the summer, but do you think the ideas of having the roof either at one angle or two, but both being towards the sun and both having the back wall higher for dirt would be better?
I’m not sure I fully understand your question. However, another reason for the roof angling down in the back is to reduce air space in the walipini. It allows the thermal mass to more efficiently heat that smaller air space. additionally, raising that back wall would require about 10 times more dirt in the back with a steeper slope and potential erosion.
Thanks for the update. I did not believe in sunken greenhouse before. It looks like you have something that works.
I live in the Pacific Northwest, near what we call the convergence zone. I get very little sun most of the winner. I've found that without the Sun the greenhouse is not self sufficient. Looking to move back to the mid west. This will be one of my first projects.
Thank you for sharing your information on what goes wrong which is a great help. I look forward to seeing your new projects. I am off grid so this looks very workable.
If interested, we wanted to let you know our Walipini building guiding is finally available! www.amazon.com/shop/adifferentway/list/2JRI58ITC5AM0
Great tips!! Thankyou
Check out flexible PVC pipe, comes in different sizes and comes in a roll.
Uses standard fittings and glue, best is it flexes to absorb shifting and settling and installs easily between fixed objects due to its flexibility
Really enjoyed the video especially what you learned. I'm at 43 lat in Wisc but wondering about applying these principles with our without the Russ Finch airflow system. Keep up the greaty work. Love the proof of concept zero energy .
If interested, we wanted to let you know our Walipini building guiding is finally available! www.amazon.com/shop/adifferentway/list/2JRI58ITC5AM0
I want to try and use the blue and red pex when I make mine.
your design reminds me of a video about rural Chinese passive solar greenhouse design
Thanks!👍
Interesting fact you mentioned. Polycarbonate only lasts ten years. Didn't know that.
As for your PVC issue. There is a flexible PVC we use in the pool industry that will move with the ground movement.
Chinese green house blanket for your cold nights !
I would have added an outside clear pipe onto every barell to monitor the fill grade
A clear gauge is a good idea, but if the barrels are connected, you only need a gauge on one of them. In my design, they naturally leveled across all 30 barrels.
Use a thick thermal blanket at night when it is cold. That would help with heat loss.
You should add the thermal pump system for your home build. That would help there for the heat and cold loss of a home.
Great video contents and presentation. It would be nice to see what you come up with for your new house, but wonder how you will protect artwork, books, piano, etc. from the direct sun? Maybe a sunny hallway where some plants grow, and the rest of the house with traditional walls?
This was an older video, and our new home is well into the build at this point. The new house is designed to be passive solar, so direct sunlight only enters for a small portion of the year, during winter. Once completed, we can use drapes/blinds to control the suns ability to affect things on our walls… Just like any home. If you check out our construction playlist, or our starting over playlist, you can actually see the house being built.
You can use an additional compost heating 'system', that doesn't need gas or other heating. It's different than the sun, but still natural, and there are some good ideas to be found on the internet. You could even attach the water from the tanks to connect by pvc pipes into your compost, or just put compost at the back of the walapini and let it heat your greenhouse using the wall.
Love this! I'm totally inspired, there's a Walipini in my future. thanks for sharing your improvements.
If interested, we wanted to let you know our Walipini building guiding is finally available! www.amazon.com/shop/adifferentway/list/2JRI58ITC5AM0
There is a great video called “Oranges in the snow” on UA-cam. It’s similar to yours but it uses geothermal energy. We are looking into it for our property.
In your redo, would you go for a narrower walk way with longer beds? Or, bring the wall forward so you have a reachable bed?
We’re working on walipini 2 now, which is actually attached to our new house. We are basing on the previous design, but going with concrete for thermal mass, which allows us to run a double row of beds-one on each side of the walkway.
@@ADifferentWay don't get enough wet from sky anymore to justify any run off irrigation. Will just use barrels as heat battery. Thinking of air flow compost behind barrels in winter for a second source of heat. Barrels will be the outer wall. Saw a chap on UA-cam from SC doing that.
Awesome work! Super impressive. I'm in the planning stages myself, so all your information is very helpful.
If you haven’t yet, be sure to consider picking up our book, Walipini Design and Construction. A link is listed in the info section of the video. It contains all the intricate details. You really need during your planning stage. It also has an entire section on what we will do differently, and the things that didn’t work quite so well, which allows you to learn from our mistakes!
I am really impressed with your design; especially your revisions after using it for over 5 years, that really says a lot about the longer term viability of it. I think I've made the decision to build one like it at this point. I'm sold. It's the swiss army knife of greenhouses/hoophouses/hothouses/etc. and suits my needs perfectly. Did you ever upload the design? Even the rough copy would be worthwhile. You've really saved me and likely a lot of other people a lot of trial and error and design changes, and probably made my garden better already thanks to the two videos I watched about your walipini. Thank you sincerely.
The only design we’ve posted so far is what was initially seen in the first video. We do have plans to create some type of booklet with far more details in the future, do I can’t give an exact date at this point. We’re in the process of building our second walipini, and we’re hoping to wait until we can give a comparison.
@@ADifferentWay : I was going to ask the same question. Congratulations on building Walipini v. 2.0! When will version 2 be completed? I am excited to see that video and what improvements you have made.
Unfortunately it would be at least a year from now because we still have a barn, stalls, and a house to build before that.
If interested, we wanted to let you know our Walipini building guiding is finally available! www.amazon.com/shop/adifferentway/list/2JRI58ITC5AM0
So inspirational, thanks for the great info! :)
Glad it was helpful!
Would a root cellar help as an additional cold sink to help with thermal regulation? Would also be a convenient place to store produce.
I have to put a lot of thought into that one. Typically a root cellar you’re trying to cool quickly in the fall and then maintain a constant temp throughout the winter. Whereas the walipini is trying to hold that summer warmth as long as possible and capture solar heat throughout the winter. Not to say it can’t be done, but there are some opposing functions going on there.
You mentioned “clean out” the barrel. I’m unsure of what you intend, but (my father ran a city municipality) when he said this, it meant a clean out valve and purge...think fire hydrants in the fall or spring. I’d have purge valves set before the connection to the last filter to simply purge (lowest point) the barrels on occasion.
fantastic stuff! really cool and glad you're experimenting and trying new things. Cool that you're not using any electricity too. This makes me one to build one and grow peppers year round in Indiana! Will be following!
Thank you so much!!! I was just about to start my Walipini when I found the first video and then this one. It was just the information I needed to share with my husband and heavy equipment operator who felt a little in the dark concerning the plan. Now he can better visualize the outcome. The video expanded my knowledge greatly also even though I have been studying and preparing for this project for a quite a while. I only have one minor question. How much difference would the heat absorption be if the barrels were painted black? Again, I appreciate you guys so much!!!
Black does a great job of absorbing heat, but other colors do offer some benefits. It really does depend on the design of your walipini and how the sun enters. I would encourage you to do a little research on that. If you would prefer it all in one source, consider picking up a copy of our book off of Amazon. It goes into much greater detail than the videos, but it’s also written to be very easy to understand so the average person can DIY! You can find it in the info section under the video. Hope that helps!
thanks for sharing your lessons learned. A great channel.
Have you ever heard of Elliot Coleman and his ideas for season extension in unheated high tunnels I think it’s definitely possible to use in this system too
Yes, we are very familiar with Elliot Coleman, and the system could certainly work alongside his!
How about using more flexible water pipes too? That way they can take more changes from settling activity
PEX might work well.
This is awesome! Please tel me, how cold does it get there and for how long? How would that compare to Phillips are Maine?
I don’t know much about Maine, however, the location of this walipini could get into the single digits for a couple of weeks during the winter, with periodic spurts in the negatives and windchill‘s around -30 or 40°F. Summer temperatures could easily reach 100 for a couple of weeks at its peak, with humidity levels around 98%. We definitely have both extremes.
Did you know this design is straight from Mike Oehler's book?
When we initially became interested in the Walipini concept, we consulted the study published by the Benson Agriculture and Food Institute. As planning progressed, my engineering students at the US Air Force Academy developed the idea as an assignment. They drew it up, and then we fine-tuned it based on latitude and sun angles. Although we did eventually read Oehlers book, I’m not surprised that the design is similar, as many walipini and pit greenhouse designs resemble each other. It’s basic engineering and passive solar design.
What do you do regarding Moles Jake's mice and other animals that can butrro in there
They have definitely been one of our biggest issues in this design. Voles are the biggest problem, since they actually eat the root vegetables. Mice are seen on occasion, though they aren’t a huge problem since they don’t eat too much. We just have to be consistent about setting traps, flooding tunnels, and keeping any holes sealed up. We are currently designing our second walipini at the new property, and we are going to try using a complete concrete structure this time, with raised beds inside. Although it has downsides of its own, we’re hoping it will eliminate this problem. Will let you know as things develop!
If my research serves me correctly I am at 48.8 N Latitude and growing zone 5B-ish as well. My question is, would the color of barrel you used in rain collection have much effect? i.e. black drums opposed to white drums. Would a black drum collect the solar energy more so than a lighter colored drum? and on the flip side would it supply heat any less efficiently or more efficiently than a lighter colored drum? Also, correct me if I'm wrong, but I assume you used a food grade plastic drum? Great video and thus far the most informational. I look forward to one day building my own using your tips and tricks. Keep it coming and God bless.
The color is important. The problem with black is that it does not reflect any light at all. The backside of those plants need reflected light. The white drums would reflect a lot but absorb very little solar radiation and thus not heat up well. A blue or red barrell would be ideal. And yes, they are food grade.
If you read about the Chinese greenhouse you will be surprised about all its advantage especially if your about the latitude 40. higher north you are and less interesting is the Walipini greenhouse since the angle of the sun is lower and do not illuminate the ground of the walipini as well as if the ground was at the same level as the beginning of the glazing. A really good technique that does not require any energy to operate is:
1. Dig a trench of 6-8 feet deep inside the greenhouse perimeter;
2. put horizontal R20 insulation panels all around (this will prevent the cold from the ground outside from cooling the soil inside the greenhouse, which benefits from the warmth of the soil deep down.
3. place the excavated soil back into the trench to hold the panels in place, and compact the soil well at every foot if possible.
You will end up with a warm soil perfect for the plants roots even if the air is under the freezing point.
Thanks for generously sharing the successes and opportunities for learning gathered from your working experiment. I 've no gardening experience myself, but am curious how you plan to rest or replenish the soil in something that's seems to be in constant use.
Great question! Most of the walipini bed gets at least 2 short breaks through the year, as we harvest different sections at different times, but generally replant it after 1/3-1/2 is empty. We also bring in plenty of compost before replanting, to ensure fertility stays high.
I’m wondering if there is a way to use the -liquid- water in the Walipini to prevent plants freezing. E.g. can you leverage the heat transfer of the water converting from liquid to solid ice to prevent plants freezing? Maybe even misting with water from the barrels which is above freezing?
Properly designed, freezing would not be an issue. Realize the only time in nearly 5 years that the temperature dropped below freezing was when we had the joint leak and lost so much of our water, in the midst of the extreme cold and cloudy days. That is definitely an exception rather than a rule. A much better option would be prevention--design the barrels correctly and the heat stored inside the water barrels should protect the plants just fine.
Your misting concept is something I have intended to play with in addition to cloth over simple #9 wire to grow lettuce in Nebraska. We can get 95 degrees in June or September so trusting in timing is not always manageable. Misting mixed with shade is my hopeful method. I can see what you mean for warmth, but you’d need plumbed in water and once you start, you can’t stop. Consider how temporary that is for most plants in a greenhouse setting. It could work for a hard cold for a week though. This -41 here...was near impossible. I’d even consider owning concrete blankets for something this nuts if it weren’t a once ever decade problem.
we live near the center of alberta this desing of yours works!
Do you have a similar set up too? How deep and did you do anything for air flow? Pipes, fan, etc.
If interested, we wanted to let you know our Walipini building guiding is finally available! www.amazon.com/shop/adifferentway/list/2JRI58ITC5AM0
Would it be possible/smart to add some vertical black strings of some material to melt snow/ice forming on the main sun windows?
I suppose you could try the vertical black strings, but because snow removal was so easy and accessible, I didn’t worry about it. The steepness of the front shed most of the snow naturally. I only had it sit on there when I had very heavy snow or wet snow.
Wawo what a gem you are, i am going to make such walipini , i have wood and stones at my land, rest i will have to buy. And will surely send you pictures. Before that i need to follow you on regular basis. I think you have demonstrated all work you have done on your chanel? I am from pakistan.
Glad you liked it! Yes, our channel shows much of what we do, but if you want more details specific to the walipini, be sure to check out our book in the info section below the video! You can find it on Amazon, and it has all the details you need to build a working structure specific to your region. Hope it helps!
Would it be a good idea for a solid base under the strip of barrels,to use the heated thermal mass "bench"of a rocket stove mass heater? I mean it could be solid concrete walls or cinder blocks for the sides,enclosing your heating/exhaust tubes along with the gravel and clay thermal mass, instead of just using up space,it would just be the right height to set the barrels in the back and maybe even make it wide enough to sit your grow beds on providing warmth to your soil and root system as well. If youre familliar with rocket stove mass heaters,they use mininal fuel wood,and you only need a small fire at night when you expect really cold weather. That would recharge the heat in the water barels as well. Would there be any downsides to doing this?
That would be a great idea. However, that’s a lot of work. If you’re in a northern climate, definitely worth it. If you’re south of 40° latitude, I don’t think you’ll need it.
I found you video as I searched for walipini information. I know this video is old, so information has changed. I have subscribed to your channel because I want to learn more details. I love your approach. Have you put together your written plans?
I live at 46.59 degrees north at an elevation of over 1500 feet. We do not get as much artic blast as you get in the Midwest so this may work even better for me. I will check for more recent videos from you on this topic. Good work!
Welcome to the channel! We haven’t put the plans together yet since we’ve been so busy building our new facility, however we are hoping to have it done within the next few months! Stay tuned!
If interested, we wanted to let you know our Walipini building guiding is finally available! www.amazon.com/shop/adifferentway/list/2JRI58ITC5AM0
@@ADifferentWay Thank you for getting back to me about your plan availability. We are too far down the pike as we are building ours but thank you anyway.
Aside from slightly added cost and time, what's the reason for three or four valves versus, say, a valve between each barrel, especially if the primary driving force is minimizing the number of barrels requiring draining during settling-induced leakage?
Just time and cost. A valve every tank would work fine.
In your book have a photo a new concret walipini project, have any video?
We have a couple of our construction videos that show the concrete base and 1/2 walls being poured, but during our construction phase for the entire farm, the designated walipini area has been very multipurpose - it has served as a tool shed/workshop, paint booth, and currently serves as a clothes drying area to keep our lines out of the cold, wet weather😁. It will be a bit before we get it finished as we just have too many other projects that have higher priority.
Sorry if I missed it, but how do you keep rain from overflowing the barrels?
Whenever we expected a rain, we would simply turn on the watering tubes to irrigate the beds. I think we only had it overflow one time when we forgot to turn on the valves. But, it simply overflowed into the back of the bed, so no big deal.
@@ADifferentWay Thanks for your response.
I have a question does side what is benefit of wall below? If we put stones instead? What will be impact, by considering that we will grow mushrooms too in bottom, thanks
I’m not sure what you’re referring to when you say wall below. However, anytime you can substitute rock, brick, or concrete for wood that is going to benefit you. Better thermal mass and no rotting. Additionally, if you want to grow mushrooms, those spores will impregnate the wood and you’ll have mushrooms where you don’t want them. With stone or concrete that shouldn’t be an issue.
Could you use the foundation of a demolished house to make one?
It could be an option, but there are so many variables, it would really depend on the situation. Is it south facing? What are the dimensions? What is the depth? Are just a few of the questions that should be explored.
Dumb question could you add additional walling on your northern wall to limit dead space and create a more insulated area?
Not a dumb question. I’d prefer to find someway to double that back wall and have water in the wall as opposed to in the barrels. That might be a little complicated though. Adding insulation wouldn’t really help much because you’re still trying to get the thermal stability of the ground, which is behind that wall. if it was outside air behind that wall, you would definitely want to insulate more.
@@ADifferentWay let me speak clearer, can you create an attic and insulate that area where the sun doesn’t shine?
Yes, you could, but I use that attic space for starts in the spring time when the sun is low enough to penetrate the front wall and still make it to the back wall. The slope on that back ceiling is 30°, which means the sun goes all the way to the back for about 4 weeks. However, you could block off a portion of that, maybe 4 feet and definitely create a small attic space with insulation. Wouldn’t lose much grow space, but would definitely limit heat loss and decrease dead space.
@@ADifferentWay I really like your design but it looks like you are on a fairly level area, I am on an approximate 4/16 hill, do you think it would work with 4ft down on north side go 6feet south then go down 4 more feet go 4 feet south then up 4 foot to grade then 6 more space added?
Actually, this structure lies on a north slope, not ideal. I used the excess dirt from the dig to build up the back wall, because the actual terrain falls away. Your idea could absolutely work, but it’s all dependent on sun angles. I describe those angles in the book.
I really enjoyed the first video, and i can't get the idea out of my head, i really appreciate your work and i hope you will follow this path of walipinis designs, sorry for my bad english, take care in Illinois ! From France, do u believe 1 meter of gravel can be enough to prevent water bed ?
1 m of gravel is pretty deep so I’m sure it could handle quite a bit of water. I had the option of draining it downhill so I used that.
One more question, do you ever run like on water during the winter? You mentioned having to decide between heat and water, does that mean you run out of water?
No, I don’t run out of water, but I will haul water in the winter sometimes and fill through the side pipe. That allows me to water the plants without letting the tanks get too low.
Those barrels make me think of return of the living dead!
Fantastic vid. Great analyses and explanations.
If you could would you provide electricity (grid or solar) for moving air?
Would you add a woodstove for emergency heat?
Certainly, you could, but we chose not to for this particular structure. You have to balance the benefits/costs of gaining maximum production potential at higher costs, or losing a little production potential, but decreasing costs. It really boils down to individual choice/needs/situation.
very nice i have 8 feet of 4 in, insulaion out a round just ounderground have it up againt the south wall of my house
If you have any photos you should post a short video here on YT. I would watch it
If interested, we wanted to let you know our Walipini building guiding is finally available! www.amazon.com/shop/adifferentway/list/2JRI58ITC5AM0
use pex instead of pvc; cheaper and can freeze without damaging ( if lucky ).
Instead of pvc maybe some solar resistant PEX?
Are these changes included on the book I just ordered ?
These and more, in detail! Enjoy!