Hello, I would like to suggest that you update the console after recording video when it can be translated along with Chinese subtitles? This is conducive to China's users to better identify, but also make the brand Avolites better marketing.
@@osimidi1134 If I buy the $400 Avolites dmx dongle, I can use your software for external midi mapping for Titan one correct? It says no external control with Titan one DMX dongle.
@@michaelvillanueva6862 Yes you can use OsiMIDI to control Avolites software with T1 dongle. No external control included with Avolites software, but OsiMIDI enhances it adding this functionality...
I have just bought the x-touch compact from behringer. Everything works right except the faders. If I program something under a fader the fader doesn't work well than. Can someone help me?
If you have the controller in Mackie Control emulation mode check the option for Mackie Control when crating the configuration. If you're not using Mackie Control check your faders send CC messages. In any case when capturing the values with capture mode move the faders completely down and up several times, so OsiMIDI captures de MIDI values for min and max positions
You can, create 2 configurations, one for the BCF2000 and one for the nanokontrol. Then open OsiMIDI twice, and on each OsiMIDI instance select a different controller and its configuration.
Ciao Antonio, credo che non cambi molto se non che hai un universo in più. Comunque non ho provato neanche se funziona ancora sul t1, visto che il video è vecchio di 8 anni... ti farò sapere
I tried it with my APC40 but it does nothing in Capture mode. The software does not detect the changes. Is there anything I need to do to my APC 40 to put into correct mode or something?
Check if you have other MIDI devices installed, maybe a MIDI virtual driver. If you have more than one device, in the OsiMIDI configurator you must select the APC40 before capturing. If you only have the APC40, check that it works fine with a MIDI monitor, like MidiOx.
It doesn’t detect my apc mini for some reason. My computer sees the device but osimidi claims it doesn’t detect anything...will it not work with an APC mini?
Ok I got OsiMidi reading it and assigned all of the faders. I opened simulator and Titan doesn’t react to it now. Is it due to Simulator? Need Titan one or mobile?
This need to be licensed after the trial
Yes, the demo mode is only for testing the software...
Hello, I would like to suggest that you update the console after recording video when it can be translated along with Chinese subtitles? This is conducive to China's users to better identify, but also make the brand Avolites better marketing.
and this works with a launchpad 8x8?
hello, nice video! one question: can be controlled mobile wings zone faders?
you can only use the faders that you see on the screen
Ijin share me
ua-cam.com/video/1n33cwkFKJY/v-deo.html
Hello! Does it work for any midi controller?
hallo,how to connect trigger akai apc 40 to avolite tiger touch 2?
thank you for this software. made my life so mutch better
Ijin share me
ua-cam.com/video/1n33cwkFKJY/v-deo.html
I have a midi controller with a lot of buttons can I just program something like a cue list directly to a button?
Yes you can map buttons in playbacks window to buttons of the MIDI controller
I would like to ask you a question on the issue of tiger control Taiwan
Ijin share me
ua-cam.com/video/1n33cwkFKJY/v-deo.html
So with OsiMidi I can map any midi controller on Titan One?
Yes you can use any MIDI controller...
Does your software work with elation midi con 2's?
Yes you can use Elation controller with OsiMIDI.
@@osimidi1134 If I buy the $400 Avolites dmx dongle, I can use your software for external midi mapping for Titan one correct? It says no external control with Titan one DMX dongle.
@@michaelvillanueva6862 Yes you can use OsiMIDI to control Avolites software with T1 dongle. No external control included with Avolites software, but OsiMIDI enhances it adding this functionality...
@@osimidi1134 You are the best!
I have just bought the x-touch compact from behringer. Everything works right except the faders. If I program something under a fader the fader doesn't work well than. Can someone help me?
If you have the controller in Mackie Control emulation mode check the option for Mackie Control when crating the configuration. If you're not using Mackie Control check your faders send CC messages. In any case when capturing the values with capture mode move the faders completely down and up several times, so OsiMIDI captures de MIDI values for min and max positions
Can I use both a bcf 2000 and a nanokontrol 2 at the same time?
You can, create 2 configurations, one for the BCF2000 and one for the nanokontrol. Then open OsiMIDI twice, and on each OsiMIDI instance select a different controller and its configuration.
OsiMIDI Thanks!
Can this run using just the titan one software or is the titan one dongle also required?
The dongle is required by Titan One, you need it as DMX port. OsiMIDI doesn't check dongle, it only controls Titan One user interface.
OsiMIDI oh ok, I was just wondering if I could still use the software but with an artnet node instead of the dongle
Avolites Titan One needs to detect the Titan One Dongle. Or else it won't start up.. Osimidi is designed for Avolites Titan One
Salve qualcuno mi puo' dire se il controller OsiMIDI e' compatibile con il titan 2 ? Grazie mille
0:10 / 3:58
Ciao Antonio, credo che non cambi molto se non che hai un universo in più. Comunque non ho provato neanche se funziona ancora sul t1, visto che il video è vecchio di 8 anni... ti farò sapere
I tried it with my APC40 but it does nothing in Capture mode. The software does not detect the changes. Is there anything I need to do to my APC 40 to put into correct mode or something?
Check if you have other MIDI devices installed, maybe a MIDI virtual driver. If you have more than one device, in the OsiMIDI configurator you must select the APC40 before capturing. If you only have the APC40, check that it works fine with a MIDI monitor, like MidiOx.
It's working now :-)
Can I use this software with Chamsys??
No, OsiMIDI only works with Avolites Titan One.
Que tal amigo.
Sabes si tambien pueda configurar el Nanoserial2 Korg con el sofware Chamsys?.
Ijin share me
ua-cam.com/video/1n33cwkFKJY/v-deo.html
Amazing!
Thank you so much for this!
Defiantly a game changer for me! :D
hello guys i want ask you two questions (1. working with nanokontrol studio? 2. i must go buy full programm for this week or i can buy it after ?)
Yes it works with nanokontrol studio. You can buy at any moment in our website
It doesn’t detect my apc mini for some reason. My computer sees the device but osimidi claims it doesn’t detect anything...will it not work with an APC mini?
Yes APC mini works fine with OsiMIDI. Check you're not using it with other software at the same time.
Ok I got OsiMidi reading it and assigned all of the faders. I opened simulator and Titan doesn’t react to it now. Is it due to Simulator? Need Titan one or mobile?
OsiMIDI works with Titan One, not with mobile.
sirve también con nanokontrol 2?
SI
Donde lo puedo comprar? Soy de chile
OsiMIDI puede comprarse desde cualquier parte del mundo, en nuestra página web, mediante tarjeta o Paypal: www.osimidi.com/t1
Belo price for mi please
You can see the prices of the software and purchase the product from our website www.osimidi.com/t1
Wooow you are my super hero
Thanks we are happy you like :-)
Can I focus on your facebook?
Ijin share me
ua-cam.com/video/1n33cwkFKJY/v-deo.html
hello, nice video! one question: can be controlled mobile wings zone faders?
you can only use the faders that you see on the screen.
Ijin share me
ua-cam.com/video/1n33cwkFKJY/v-deo.html