Snowflake, I don't babysit pipe I do sprinklers, it's 54 floors ,I ran the job from ground up ,I didn't need or have anyone to tell me what to do ,I do whatever da fuq I want on my jobs ,always finish ahead schedule with the highest quality. @Michael Eastman you're assuming this is how I work everyday, You wrong and you mentioned all the ppe, that's a sign of those that says they good worker in the end of the day they don't know shit .I see that alot
Debió de dejar una separación como de 2 inche del ducto Los ductos van cubiertos de oscilación.. Espero q ahi no lo hagan La cubierta de oscilación Q yo sé q lo hacen.. Ese mi opinión. Todo bien Solo esa observación.. Bendiciones.
If using CPVC it takes between 3-4 days iron takes about week and half or two weeks ,we're talking about 15-20 heads maybe more if there's basement and attic.
It's 32 story building in Manhattan, I was using an awesome equipment, ¼ inch bit and concrete Sammy's, it was 100 degrees that day,once I start drilling I won't even look up anymore, it's like a sniper shot ,once you pull that trigger, you don't even need to look back
How’s that work? Your part of a combo local in Canada with pipe fitters and plumbers. They send you to work for a mechanical contractor. One day your helping the plumbers next day your helping the steamfitters next day your relocating sprinkler heads. Wonder what your training like. 🤦♂️
@@fitter5423 lol no I work for Vipond. We are one union yes but each trade is separate contracts and rates and I have never not had work in sprinklers but some guys will get call outs to go pipefitting when sprinklers slow down. And our training is great we have free courses available through our union hall on every aspect of sprinklers specialty systems fire pumps testing and maintenance etc.
Don't be jealous ! Be better Also I have all type of benefits, from 401k to IRA pension, vacation, time off , health ,dental, vision and most importantly i have freedom to do whatever dafuq I want at any of my jobsites, no one needs to babysit me ,I dont get jealous and blow up Rats on front of job sites, I do better then that,I get the job done with quality and on time ,Be better .
Quality is def a long stretch bub. You hand tighten rods in the anchors. Enough said. Would have taken a few extra seconds to take some channellocks and tighten it down properly. But you don’t babysit pipe you do sprinklers lol. Whatever that means 🤣🤣🤣
@@Coastingonlifedon’t listen to the UA haters. Half of them sit on the bench since their bosses can’t secure work. There’s a reason prevailing wage jobs exist, and that’s because 90% of the union shops are useless. And I’m saying that as someone who spent 10 yrs in the union.
No you can tell they ain’t doing field welds by that sticker on the pipe. That’s a fab shop’s label sticker. Most likely Neill/LIP/Bruce supply since it’s NYC.
Just started doing fire protection I’m with 669 AZ union I’m loving it big change from doing concrete
Where do you go for your classes?
@@moi3216 I'm with them as well. All my classes are online
great job. take it from a old fitter, wear a mask when drilling concrete .breathing problems now .
I do! I was without mask for the video .
Thata boy....Put in the rod hand tight. Unreal
Noob crybaby ,this is like driving a stick shift, you know when to switch gears ,have you done 70+ story building ? Silence
When you start from scratch and finish a 70+ story building we talk okay .
I just have 15 years experience as a union trained sprinklerfitter. You’d get fired if you worked for a union contractor you scab
What the hell does a 70 story building have to do with hand tightening a rod scab. You make zero sense.
😂😂😂
God bless the push on Vic's and impact drill
Yeah Bro can't go wrong with these Vics
Slip vics are trash for anything other than a quick install that wont last no time 🤫
@@mindplay_4086 lol okay buddy
great work sprinkler fitter friend
You got it made easy! Well good for you boiz. What state is this ?
NY
What kind of concrete anchors; redheads, tapcons, drop ins?
sammys screws for concrete , uses ½ socket adapter.
Drop ins are trash. Who even uses those anymore
No sleeves, no safety glasses & no concrete dust collector. Definitely the lowest bidder on that project 😂
Snowflake, I don't babysit pipe I do sprinklers, it's 54 floors ,I ran the job from ground up ,I didn't need or have anyone to tell me what to do ,I do whatever da fuq I want on my jobs ,always finish ahead schedule with the highest quality. @Michael Eastman you're assuming this is how I work everyday, You wrong and you mentioned all the ppe, that's a sign of those that says they good worker in the end of the day they don't know shit .I see that alot
@@Coastingonlife wow. 54 floors. Cute. You HAVE to be the Michael Jordan of sprinklerfitters then.
@michaeleastman buddy you couldn’t do what he was doing for all them floors get off his dick
Yeah he's bad exempt
Very professional job , but this gentleman not using safety glasses (protective eyewear) ?
LMAO what are we ? Don't worry about my ppe ,I do wear them ,this video wasn't meant specifically for safety.
We don't babysit pipe we do Sprinklers
I like my eyes
I agree @mariansirbu. My brother lost his right eye drilling concrete to hang a pipe. Other than I love my career as a pipe fiiter.
Dude put a HEPA vacuum on that rotohammer so you don't breath the silica in the concrete it causes cancer
@@LC-hq6hc thanks for the tip
Debió de dejar una separación como de 2 inche del ducto
Los ductos van cubiertos de oscilación..
Espero q ahi no lo hagan
La cubierta de oscilación
Q yo sé q lo hacen..
Ese mi opinión.
Todo bien
Solo esa observación..
Bendiciones.
Esos ducto en NY tiene oscilación en el lado de adentro, en NY todo los ductos tiene 1" de oscilacion adentro, muy mejor asi.
How long it take a training to be able to install sprinkler system to a house
Let’s say 2000sf
If using CPVC it takes between 3-4 days iron takes about week and half or two weeks ,we're talking about 15-20 heads maybe more if there's basement and attic.
What kinda building are you putting this system in? Also, where's your safety glasses? Lol I get dust all over my shit when drilling anchors
It's 32 story building in Manhattan, I was using an awesome equipment, ¼ inch bit and concrete Sammy's, it was 100 degrees that day,once I start drilling I won't even look up anymore, it's like a sniper shot ,once you pull that trigger, you don't even need to look back
that looks like PT Slab to me.. contractor lets you drill in that far??
8" slab 47 flights up
Let me guess . Tri state fire sprinklers ??
How them Hilti guns treating you big brother. We use nothing but Makita impacts and they do a damn good job overall. Battery wise and power wise
Hilti tools are great tho so is makita
Milwaukee Impact Milwaukee Bandsaw But I Do Use A Hilti Hammer Drill💯
why he looks so tired lmao
Not sure why there are so many outlets so close
Apartments are always like that. A main line and branches all over to feed the rooms ,
No safety glasses ballsy
Nvm, just read the description lol. Lucky lucky
super
I'm a fitter in canada ua179. What's your guys wages like down in the states??
It varies with your xp and from company to company but it will be in between $35 - $60 per hour
@@Coastingonlife oh ok that's good wages I'm not sure what living expenses are like there but its same wages here 40-50$ hr
How’s that work? Your part of a combo local in Canada with pipe fitters and plumbers. They send you to work for a mechanical contractor. One day your helping the plumbers next day your helping the steamfitters next day your relocating sprinkler heads. Wonder what your training like. 🤦♂️
@@fitter5423 lol no I work for Vipond. We are one union yes but each trade is separate contracts and rates and I have never not had work in sprinklers but some guys will get call outs to go pipefitting when sprinklers slow down. And our training is great we have free courses available through our union hall on every aspect of sprinklers specialty systems fire pumps testing and maintenance etc.
@@Coastingonlife I wish if I could get salary like you, I also work sprinkler system more than 12 years
Definitely some non union rat scabs
Don't be jealous ! Be better
Also I have all type of benefits, from 401k to IRA pension, vacation, time off , health ,dental, vision and most importantly i have freedom to do whatever dafuq I want at any of my jobsites, no one needs to babysit me ,I dont get jealous and blow up Rats on front of job sites, I do better then that,I get the job done with quality and on time ,Be better .
Quality is def a long stretch bub. You hand tighten rods in the anchors. Enough said. Would have taken a few extra seconds to take some channellocks and tighten it down properly. But you don’t babysit pipe you do sprinklers lol. Whatever that means 🤣🤣🤣
@@Coastingonlife i need 20€ can you give 😅😂
@@Coastingonlifedon’t listen to the UA haters. Half of them sit on the bench since their bosses can’t secure work. There’s a reason prevailing wage jobs exist, and that’s because 90% of the union shops are useless. And I’m saying that as someone who spent 10 yrs in the union.
Wish my company would let me work this slow
LoL I'm not the fastest but Godamn dude
Lmfao im just joshin man one pipefitter to another. Yall do your welds in field too? Fuck that's painful
No you can tell they ain’t doing field welds by that sticker on the pipe. That’s a fab shop’s label sticker. Most likely Neill/LIP/Bruce supply since it’s NYC.
Why pipes are not red painted?
Because it's not exposed system
You also are only required to paint Mains/risers/cross-mains. So a floor’s branch lines wouldn’t be painted even if exposed.
MARIO!!!
This video is crying scab
We dont babysit pipe we do sprinkler
Why’s that works actually getting done?
You 638 local
Does he look like he’s a UA employee? COME ON MAN 😂
HELL NO !!! Road sprinkler 669 here.
Bro taking way too long
I mean waaaaay too long tho, every time I open this video, I'm in the exactly same place,nothing got done.
Cut off T-shirt...
Yup ! The hot day doesn't need to be miserable up in here .
Slip fittings wow. We had one the other day lol
These are the best fittings ever bro Victaulics ez-couplings
Crapy work lol 😆 shits all Crocket he hit the cement
RATS
Sprinklerfitter 669 Don't you have anything else to do ?