Before you remove the bumper, fix a few layers of masking tape and thin card along the exposed main body edge to avoid scratching the paintwork as the bumper section pops off. This vid is also useful for replacing the rear turn signal and reverse light lamp units. Thank you.
My friend, I agree with you because I thought so. There are some models that do not need to dismantle the bumper, but this model, unfortunately, needs to dismantle the bumper completely.😊
The sensors just pop out without taking off the bumper on the 2013 model, put hand under bumper and squeeze clips in after unplugging the sensor and pops straight out.
Bien renseigné mais je pense trop travailler pour un néophyte comme moi trop âgé pour faire ce travail moralité je fais par une concession kia autrement pour une personne avisé peut jouir de la vidéo qui est très bien construit.
My father has a 2014 Sorento too but when I looked at the sensors in the rear i could only remove 2 of the 4 connectors how were able to squeeze your hand in and replace all 4
@@supergamerturbo2096 can't remember now, it was a several months ago, I think the 2 in the middle are trickier to get to, but it's doable. Yes, you will need to use a mechanic's board(on rollers) to comfortably position yourself underneath of the KIA, and yes, you will need both hands to disconnect the wiring and then to push the sensor in with one hand and to release the plastic clip by using your other hand. I think I used my plastic ramps from Walmart to roll my KIA backwards on them, so it is raised up a little. And why do you need to replace all 4 of them ?
hahaha~~ great engineer~~(from korea)
Before you remove the bumper, fix a few layers of masking tape and thin card along the exposed main body edge to avoid scratching the paintwork as the bumper section pops off. This vid is also useful for replacing the rear turn signal and reverse light lamp units. Thank you.
👍👍👍
Having some trouble disconnecting my electrical any tips
Qual lugar fica a central original do sensor de re?
valeu
Many thanks ;)
😂 you don't need to take the rear end of the car apart F.F.S.
My friend, I agree with you because I thought so. There are some models that do not need to dismantle the bumper, but this model, unfortunately, needs to dismantle the bumper completely.😊
Plz go ahead and share a video of how to do it without taking the bumper off then f.f.s 😂
Thanks for the walkthrough
I feel confident enough now to attempt this on the weekend
(Great camera work too)
Selam arka tompon sökmeden sinyal lambaları nasıl değiştirir
Can you please show us for the front and what is the best product. Thanks for this clib it is very helpful.
Nice touch to the video with the old school hip-hop. Love the throwback instrumental tune "Dawn it feels good to be a gangsta" by the Ghetto Boys.
The sensors just pop out without taking off the bumper on the 2013 model, put hand under bumper and squeeze clips in after unplugging the sensor and pops straight out.
2014 KIA Sorento is the same way
I can get to the 2 centre ones this way but not the 2 outer ones
really. I need to replace one or mine but cba taking off the bumper.
👍👍👍
Great video. Liked that you showed each step in detail and in sequence. Also liked the quality of camera work.
Good job
Bien renseigné mais je pense trop travailler pour un néophyte comme moi trop âgé pour faire ce travail moralité je fais par une concession kia autrement pour une personne avisé peut jouir de la vidéo qui est très bien construit.
Construite désolé pour cette faute .
Thank you, excellent walkthrough!
Just an update for whoever needs it. Replaced a sensor on my 2014 KIA Sorento. There's room to get to the sensors without taking anything apart.
My father has a 2014 Sorento too but when I looked at the sensors in the rear i could only remove 2 of the 4 connectors how were able to squeeze your hand in and replace all 4
@@supergamerturbo2096 can't remember now, it was a several months ago, I think the 2 in the middle are trickier to get to, but it's doable. Yes, you will need to use a mechanic's board(on rollers) to comfortably position yourself underneath of the KIA, and yes, you will need both hands to disconnect the wiring and then to push the sensor in with one hand and to release the plastic clip by using your other hand. I think I used my plastic ramps from Walmart to roll my KIA backwards on them, so it is raised up a little. And why do you need to replace all 4 of them ?
Thank you!😎
Bravo
Great job 👏
Thank you very very much
Your welcome!