Don't know if ppl have noticed this but, the new hero glamour comes with 100/80-18 rear tyre. I think this tyre will fit RX stock rim. The tyre looks good in the glomour have a feeling it will look good even in the RX. The side profile of stock rx tyre and the glomour tyre is almost the same, only difference is the width.
personally I have 16" in my 4s-135. best cruising is at 67km/hr and top speed is 103km/hr on Google speedo. For everyone's info, if you need the same top end as stock, try 32 teeth rear with 16", that is if you can find one cause am still searching
I am also using yezdi tyres on my rx135 yes I agree that it isn't that good while in my samurai I am using 18inch it's really good and comfortable but I installed a new tyre on that because of it Currently I can't go with stock one but after few months I will go with stock one 👍
I remember having this debate - initial pickup vs top speed compromise with 16" wheel with a mechanic 15 yrs ago. Looks wise too, 16" makes it look like the Bike has polio. One leg bigger than the other. One more great review!!!
What's the difference between rxz and rx135? Is there any chassis difference between them..? If yes what are they? And also is it possible to transform rx135 to rxz?
Bhai, wasn't the bike originally 4speed when you bought it?! I remember you made a video about 5speed a longg time ago, but I don't think it was about this one. Also, does it still have the RDD CDI? I thought it was specifically made for the 4 speed.
Yes this is still a 4speed. Yes it does have the rdd cdi. Rdd cdi is made for both 4speed and 5speed. It has 2 curve maps which has one map for 4speed and the other for 5speed
Hey bro I have an rxg on yezdi wheel and catalytic silencer my rxg used to give 20 mileage before, after serving few days back it started to give mileage of 35 km avg ,if I install stock wheel setup and stock silencer do I get more mileage.
Actually bro thanks a lot for u❤️ I'm having a lot of confusion of this 16' rim.. the real reason why I want smaller rim is because recently i installed tvs phenix springs suspension so my bike height goes up by 1 Inch my mom feels too High to get on the seat.. i came to know that 16' don't provide standard mileage bcs it need much more rpm to run compared to stock 18'... So Should i try the 17' with 3.0 setup? it would reduce 1inch in seat height. Does that' setup too has this much of disadvantages ?
Yes tvs Phoenix shocks increase the rear height. You can try 17 but tyres are hard to find in that size i guess. Not sure. You should ask someone who has 17inch on his motorcycle.
@@gocool8558 17 inch rim is available in avenger cruise front wheel. I have seen 17 inch in RX. It looks good. But I think it will be a bit difficult to find the rear tyre for it.
Ralco grippers for 50% offroad 50% onroad. But if you really go offroading only then go for ralco if not Michelin sirac is a good option 70% onroad 30% offroad
@@motosoul Michelin sirac is not a good option .consider the situation , If ur tyre is slightly wet and road is dry or vice versa . At that time if u apply break the bike will skid .i face several times . Just escaped from falling . Its an harder compount tyre as my knowledge . Its looks are aswome .also its tyre milage is good .
@@motosoul hmm . Soft tires . Tire life is low but gripp is good . No suggtions . Try it and feel it .😁😁 Iam using michelin right now ,i feel like that . i used motod ,nylo gripp ,ceat secura ,birla etc on my diffrent bikes .
Yes you can Yezdi spokes + yezdi rim + rx100 drum But a few wheel truing guys prefer rear wheel splendor spokes + yezdi rim + rx100 drum Can fit both versions
Disadvantage is that all the dirt and muck would go inside the sprocket and chain. If you clean it once in a while its good. But full chain cover is more safe too. Helps from anything from getting inside the chain cover but then the chain cover be a problem if the chain breaks anytime while riding, it will break the chain cover too and might result in sudden halt of a running bike causing injury. This wouldn't happen normally. But just sharing it with you
Which Tyre do you guys have on your Yamaha RX?
Stock 18 Inch tyre or 16 Inch tyre?
Both. 😌
17 😁
Haha
16
Great!
Much needed topic! People need to realize this and switch back to stock sizes🤦 Yamaha knows whats best for the bike😜
Exactly. Companies spend so much time researching on everything.
@sanjay The rx100 original back tyre stock size is 2.75 x 18
There is significant impact on the riding posture on a yezdi wheels yaar but the cornering ability will get increase for sure
Don't know if ppl have noticed this but, the new hero glamour comes with 100/80-18 rear tyre. I think this tyre will fit RX stock rim. The tyre looks good in the glomour have a feeling it will look good even in the RX. The side profile of stock rx tyre and the glomour tyre is almost the same, only difference is the width.
Too late
I already installed 16" wheel on my samurai
Totally Regretting it now😔
Going back stock 💯👍
It has its own advantages. You can always revert back to stock in the future. Enjoy 16inch as of now. Have fun!
Where do you get new tire for your 16inches rim bro?
personally I have 16" in my 4s-135.
best cruising is at 67km/hr and top speed is 103km/hr on Google speedo.
For everyone's info, if you need the same top end as stock, try 32 teeth rear with 16", that is if you can find one cause am still searching
Which bike do you own??
Thanks for the tip! Was thinking about fitting a thicker type on the RxZ.
You're welcome bhai!
I am also using yezdi tyres on my rx135 yes I agree that it isn't that good while in my samurai I am using 18inch it's really good and comfortable but I installed a new tyre on that because of it Currently I can't go with stock one but after few months I will go with stock one 👍
Great! You've got best of both worlds 😁
Yes best of both worlds 😂 but I too want to go with stock one
Yes you can revert back to stock in the future
I remember having this debate - initial pickup vs top speed compromise with 16" wheel with a mechanic 15 yrs ago.
Looks wise too, 16" makes it look like the Bike has polio.
One leg bigger than the other.
One more great review!!!
Haha thank you Alok bhai.
Brilliant information.
What's the difference between rxz and rx135? Is there any chassis difference between them..? If yes what are they? And also is it possible to transform rx135 to rxz?
Yes the main difference is chassis and body parts, rxz and rx135 share same engine but body parts, etc are different
Thank you bhai. For me main disadvantages was finding tyre. What do you tell about 3.25x18?
3.25x18 is very big for RX.
Use 17 inch rim with 3.00 inch tyre bro
@@faahim this 3.00x17 was very rare is 3.00x18 ok for rx
@@Mr.Jobber yes bro
Bro, can we install 17 inch spoke rim on stock hub? Yamaha rx135
Please reply
Yes you can.
One more disadvantage for tall riders is yezdi wheel gives leg cramps, stock tyre doesn't give leg cramps.
Very informative video🔥👍
Thank you Ashab!
@@motosoul 🤗
Bhai, wasn't the bike originally 4speed when you bought it?! I remember you made a video about 5speed a longg time ago, but I don't think it was about this one. Also, does it still have the RDD CDI? I thought it was specifically made for the 4 speed.
Its just the 5spd engine covers.
Yes this is still a 4speed. Yes it does have the rdd cdi. Rdd cdi is made for both 4speed and 5speed. It has 2 curve maps which has one map for 4speed and the other for 5speed
Very good information 👍👍
Thank you Suresh bhai.
Bro my Rx135 Rear rim size is 18inch , now i am going to buy tyre which is suitable 2.75×18 or 3.00×18
If I am not wrong front would be 2.50-18. Rear would be 2.75-18. This is the stock set up I feel.
Rx 135 front 2.75*18
Hey bro I have an rxg on yezdi wheel and catalytic silencer my rxg used to give 20 mileage before, after serving few days back it started to give mileage of 35 km avg ,if I install stock wheel setup and stock silencer do I get more mileage.
It is actually dependent on many factors. Clutch plates, carburetor tuning, silencer etc.
Actually bro thanks a lot for u❤️ I'm having a lot of confusion of this 16' rim.. the real reason why I want smaller rim is because recently i installed tvs phenix springs suspension so my bike height goes up by 1 Inch my mom feels too High to get on the seat.. i came to know that 16' don't provide standard mileage bcs it need much more rpm to run compared to stock 18'...
So Should i try the 17' with 3.0 setup? it would reduce 1inch in seat height. Does that' setup too has this much of disadvantages ?
Yes tvs Phoenix shocks increase the rear height. You can try 17 but tyres are hard to find in that size i guess. Not sure. You should ask someone who has 17inch on his motorcycle.
@@motosoul thanks
@@gocool8558 17 inch rim is available in avenger cruise front wheel. I have seen 17 inch in RX. It looks good. But I think it will be a bit difficult to find the rear tyre for it.
Which is the best rear shock absorbers for stock 18inch rim?
Stock RX100 shocks or platina shocks are best for stock 18inch rims. Also made a video on shock absorbers
Well said bhai👍🙏❤️
Thank you ♥
did you convert into 5speed?
No brother. This is still 4speed. Just the covers are 5speed
Bro where can I get 5speed covers and what will be the price?
Price around 6-8k. Look for ads on facebook, in fb groups. Or nearby mechanica
Mechanics*
Bro which tyre is best for stock setup for rear with dimensions iam planing to change pls help me out
Stock tyre 3.00-18 is better
do impulse 18 inch wheel rims suit rx bikes?
Yes the Stock Tyre and Stick Rim is the best for Rx 100 and 135 .The yezdi wheel not perform well as the Stock size tyre.
Exactly!
Any shortage of fuel economy in yezdi wheel
Hey Bro suggest me good tyre for my RX100 for both purpose On-road and Off-road.
Ralco grippers for 50% offroad 50% onroad. But if you really go offroading only then go for ralco if not Michelin sirac is a good option 70% onroad 30% offroad
@@motosoul
Michelin sirac is not a good option .consider the situation , If ur tyre is slightly wet and road is dry or vice versa . At that time if u apply break the bike will skid .i face several times . Just escaped from falling . Its an harder compount tyre as my knowledge . Its looks are aswome .also its tyre milage is good .
Actually, all tyres on the rx do the same thing I've observed. Which one do you suggest ranjith bhai?
@@motosoul hmm . Soft tires . Tire life is low but gripp is good . No suggtions . Try it and feel it .😁😁 Iam using michelin right now ,i feel like that . i used motod ,nylo gripp ,ceat secura ,birla etc on my diffrent bikes .
True.
Hi bro can we fit yesdi spoke to 16inch rim with rx100 drum
Yes you can
Yezdi spokes + yezdi rim + rx100 drum
But a few wheel truing guys prefer rear wheel splendor spokes + yezdi rim + rx100 drum
Can fit both versions
@@motosoul tq for your quick reply i was having hard time to buy yesdi spoke or not bdw you got 1 new subcriber 🎉
You're most welcome
Nice sir 👍
Thank you Kevin
Bro top speed and initial which one best?
I prefer top speed
@@supersalimpatel1163 which size tyre?
For Long 400m wheelie on rx which tyre is better stock or yezdi wheel .. ?..
Wheelie on any bike or any tyre is possible.
Reduce the tyre pressure like 22 in the back it will help u to lift easier and it gets a good grip in the road
@@faahim ❤️❤️❤️ thanks bro 😉👍
Stock rx tyre 18inch
@@Rxmohan ok bro
Very nice bro 🤜 do many more video
Thanks Vardhan bhai. Will do.
@@motosoul ur number plzz
Please send email on me@hassanelyas.com will reply with the contact number
Bro is there any disadvantage of half chain cover for rx ?
Disadvantage is that all the dirt and muck would go inside the sprocket and chain. If you clean it once in a while its good. But full chain cover is more safe too. Helps from anything from getting inside the chain cover but then the chain cover be a problem if the chain breaks anytime while riding, it will break the chain cover too and might result in sudden halt of a running bike causing injury. This wouldn't happen normally. But just sharing it with you
@@motosoul thank you bhai for sharing your experience it helps so much thanx alot
You're welcome bhai :) stay safe
Bro can we set a rx 135 rpm meter on rx 100
Yes you need to fit the rpm gear in the right engine cover
Bro can u make a video on it if possible,it would be very helpful
Will try to make a video about it in the future if any of my friends get the rpm kit installed on their bikes. Thanks
What rims perfectly fit for rx 135 wheel rim 17 inch
Bro in your rx 100 having 6 hole silencer or not
Yes bhai my RX100 has 6 hole silencer
Bro 16 inch wheel how much prize
RE bullet spokes can also be used
what about rear wheel rim size
When looks only matters. 16 “ win.
Yes it does!
TVs XL ring and yazde tyres fitting
Love from MAHARASHTRA MH 11
Thank you Amit bhai. ♥
Front rim size ?
2.75-18
And rear drum ?
Drum is stock rx drum. Only use yezdi rim 3.25-16 and yezdi spokes