I can remember doing this as a child but they didn't have printers and computers back then..lol good old fashion drawing and coloring... I love doing this, I make badge reels for my daughter and her co-workers at the hospital even made some for the doctors... it's so much fun...!! I actually cut mine with the stencil setting and a little more pressure and it cut amazing..!!
Thank you so much for the resin disclaimer. I get so freaked out when people aren't taking safety precautions! These also turned out so good I can't wait to try it!
Thank you for explaining step by step the process in detail. I wanted to know can sublimation ink print on shrinky paper because my printer has sublimation cosmo ink in it
ty for the tip on if you want it to be 2" ur going to need to be 6" better way to look at it instead in percentage. Sarah it Ur Sheets Matte? i sanded mine one side so my coloring pencils wood grabs better mat work for Ur printer, i wonder if it would print on those Meag tank Printers, i know thee best are those toner cartridges printers, but not going to buy another printer juz to print got shrinky dinks. I just use coloring pencils or Posca Paint markers ty for ur video, saw another video to put a sealer first so ur colors wort bleeds out sealers like Podge Modge i use Aleenas Acrylic Sealer Matte Finish, but also come in Glossy, very good for sealing.
Don't know if anyone is currently checking in on these comments... but my question is: we have difficulty judging colors. We know that a color intensifies in the oven, but can't find a "color chart" that gives us a sense of the before and after. Any suggestions ?
Hi! 🙋♀️ Thanks for the video!! I was curious what kind of filter for the respirator you used?? I know there are numbers on the filter to identify them, but am unsure which numbers are good to keep out resin/epoxy out. Thank you! 🙏🏻
Hi!! Thanks for an informative video! I want to make just one set of earrings using this method, so I don't want to invest in resin/the respirator etc. Do you think I could use UV gel nail polish and the nail lamp to finish it? I got the idea when you mentioned a nail light ;)
Can anyone who has tried this let me know if this did any damage to or dulled your Cricut blade at all? I’m nervous to try cutting plastic with it! Lol
It takes forever to dry like some hours. I have tried modpog but it doesnt work for me. I do UV but you have to be careful using the uv resin because if you didnt prep the layer first the resin will pop off. I use embossing power as well. I enjoyed your video!
@@sunfllowerrss ive heard the same with resin and shrink plastic. I've seen videos where people used just a coat of mod podge then after that dried did the resin. And I know it takes longer to dry, but have you tried the dimensional mod podge? I got some but haven't tried it yet.
oh my gosh! if you try it please let me know i want to coat my keychains in resin but even the uv resin is super expensive wonder if this would be a good cheaper alternative
Maybe try the acetate setting? I didn’t see your mat after you cut but I know that cutting the faux leather on leather setting kind of destroyed my mat :(
oh really? It leaves cuts on my mats but I don't really care about that because I don't find that affects my usage so I've never seen it destroy my mat.
It sounds like you are using too much resin, if you use just enough it will dome within the edge and not bleed over so just add a little and gently move it to the sides :)
Hi, im sorry the late question. But do you guys think I can use shrinky dinks w/ a regular iron for clothes? I dont have an oven or a heat gun at home :(. Any answers will be greatly appreciated. Thank you 💚
Yes it does that sometimes. Just leave your piece on the side of the window and let the sun finish it off. It might take a couple of days for the stickiness to go
Great information, I appreciate the details you provide about opacity, figure size, and what to set cut on!
The idea is really cool, very cool!
So pretty!!
Thanks! I'm going to give it a try. 😊
I can remember doing this as a child but they didn't have printers and computers back then..lol good old fashion drawing and coloring... I love doing this, I make badge reels for my daughter and her co-workers at the hospital even made some for the doctors... it's so much fun...!! I actually cut mine with the stencil setting and a little more pressure and it cut amazing..!!
good to know! And ya when I was a kid we just drew on them as well haha.. i'm sure they were beautiful.
@@SarahTypes Brings back alot of fun memories, thanks for uploading and sharing!!
Love it
Thank you so much for the resin disclaimer. I get so freaked out when people aren't taking safety precautions! These also turned out so good I can't wait to try it!
Woo hoo! Ty! Loved your tutorial, straight forward the point and bonus points for tell us what size to print them to get the sizing we want afterward.
Thank u now I can make my own
Thank you so much
You can put it on poster board too
Thank you for sharing
It takes hours to dry and you need more pressure multiple cuts
Not sure if this was said but this helped me with my glossy projects. Put matte scotch tape on top of the black lines. :-)
Thank you!!!!!!!!🙏🏽🙌🏾
So great 👍 please which is your printer reference
Thank you for explaining step by step the process in detail. I wanted to know can sublimation ink print on shrinky paper because my printer has sublimation cosmo ink in it
That's what I have in my printer yes you can use on strinky dink.
ty for the tip on if you want it to be 2" ur going to need to be 6" better way to look at it instead in percentage. Sarah it Ur Sheets Matte? i sanded mine one side so my coloring pencils wood grabs better mat work for Ur printer, i wonder if it would print on those Meag tank Printers, i know thee best are those toner cartridges printers, but not going to buy another printer juz to print got shrinky dinks. I just use coloring pencils or Posca Paint markers ty for ur video, saw another video to put a sealer first so ur colors wort bleeds out sealers like Podge Modge i use Aleenas Acrylic Sealer Matte Finish, but also come in Glossy, very good for sealing.
🔥🔥🔥
Don't know if anyone is currently checking in on these comments... but my question is: we have difficulty judging colors. We know that a color intensifies in the oven, but can't find a "color chart" that gives us a sense of the before and after. Any suggestions ?
Maybe clear tape on the black lines?
Hi! 🙋♀️ Thanks for the video!! I was curious what kind of filter for the respirator you used?? I know there are numbers on the filter to identify them, but am unsure which numbers are good to keep out resin/epoxy out.
Thank you! 🙏🏻
not sure which number.. i have a video on resin safety. I use a filter that's meant for organics, carbon materials
Can you use resin for nails for this?
Maybe put matte scotch tape on the lines so the machine can read them but also the ink won’t get on the rollers
Hi!! Thanks for an informative video! I want to make just one set of earrings using this method, so I don't want to invest in resin/the respirator etc. Do you think I could use UV gel nail polish and the nail lamp to finish it? I got the idea when you mentioned a nail light ;)
A lot of people actually use UV topcoats to finish their products because it doesn't dry tacky. It works just fine if you don't want to buy resin
Can anyone who has tried this let me know if this did any damage to or dulled your Cricut blade at all? I’m nervous to try cutting plastic with it! Lol
Use the deep cut blade
Great video. I have a question. How did you get the boarder around your images?
When you print from design space you get the border so
Machine will know where to cut.
@@beebeej1 thank you!
@@madethemlook you're welcome
It takes forever to dry like some hours. I have tried modpog but it doesnt work for me. I do UV but you have to be careful using the uv resin because if you didnt prep the layer first the resin will pop off. I use embossing power as well. I enjoyed your video!
oh your resin has popped off? interesting. Mine had such a rough surface I assumed it would grip well.
how would you prep the layer? I’m trying to do this, but i don’t want to mess up lol!
@@sunfllowerrss following
@@sunfllowerrss ive heard the same with resin and shrink plastic. I've seen videos where people used just a coat of mod podge then after that dried did the resin. And I know it takes longer to dry, but have you tried the dimensional mod podge? I got some but haven't tried it yet.
@@sunfllowerrss you can sand your layer first with a 320 sand paper. That works for me.
😢😢After putting resin on my white shrinky dink that was also white background, my item becomes transparent 😢 Help 😢😢
I wonder if a gel polish top coat would do the same thing?
maybe? wouldn't hurt to try! I don't wear nail polish haha so I don't have any.
oh my gosh! if you try it please let me know i want to coat my keychains in resin but even the uv resin is super expensive wonder if this would be a good cheaper alternative
Has anyone tried this with sublimation ink? I don’t have regular inkjet ink.
What printer do you use? I have an Epson R3000 but it won’t print stickers or anything that isn’t Epson paper.
i use canon, i think I linked it in the description
Maybe try the acetate setting? I didn’t see your mat after you cut but I know that cutting the faux leather on leather setting kind of destroyed my mat :(
oh really? It leaves cuts on my mats but I don't really care about that because I don't find that affects my usage so I've never seen it destroy my mat.
I tried to use resin on my charm and it covered my holes. How do u keep the holes open. I'm going to try again later today. Wish me luck! 🤞
It sounds like you are using too much resin, if you use just enough it will dome within the edge and not bleed over so just add a little and gently move it to the sides :)
@@SarahTypes thank you i also used a heat gun and i think the force was too much cause it make it get on paper too. trial and error.
Hi, im sorry the late question. But do you guys think I can use shrinky dinks w/ a regular iron for clothes? I dont have an oven or a heat gun at home :(. Any answers will be greatly appreciated. Thank you 💚
I don't think it would work unfortunately
Does hairdryers work with this?
You could try on a hot plate, depending what brand, I’ve had a some success. I used like an indoor electric grill with a flat plate.
This is a late reply, but I saw someone using a heat gun to shrink and mold the shrinks dinks
Using a heat gun works best with smaller designs because it will heat it more evenly
Acetate setting
Hi! So I’m tryin the uv resin but even after 4 mins it’s sticky. Is that normal?
not really.. your uv light may not be strong enough
Yes it does that sometimes. Just leave your piece on the side of the window and let the sun finish it off. It might take a couple of days for the stickiness to go
What’s setting did you use to cut?
I think in the end they used the "Leather" option to cut
There's 6 sheets for 39 cents in my city right now
Where?
Yes, where please?
I use embossing powder
that's a cool idea!
@@SarahTypes I like using embossing powder it works
Do you use an embossing heat gun to seal the powder after?
Print your designs a day or so before cutting it
Can you print on the transparent shrinky dink plastic film?
I dont think you can as the printable has a special layer for printer ink.
Why are you wearing that mask? I have the same resin and it doesn’t smell.. and no where on the packaging or listing does it say it’s toxic
because it's toxic, google it.. i have a video on this topic
Sarah Types ok im going to have to do that. Like i said it doesn’t have it on my packaging.thanks
Sarah Types yeah I looked it up the one you’re using isn’t toxic. Some are but that one is safe.
Resin is toxic whether it smells or not. Please be safe when working with chemicals .
@@LoveOfArt87 literally every resin on the planet is toxic and you shoild be wearing ppe when using.