I know they try to simplify this for people but they take way too long installing these n u really don't wanna install the posts first...u should do them as u go along n dump concrete in dry then wet them in after...so your gonna mix up a bag in the wheel barrel for every post!?...work smarter, not harder
Any parts available to hold a vinyl self close gate open while you drive a mower through? Like vinyl gate hold back? I cant seem to find them anywhere.
Nice video, a tree fell down and damaged 2 sections of my pvc fence but didn't damage the post. Is there a way to install the middle pieces of the gate with out removing to post to install them?
Hi, don't know If you've solved this problem already, but you can remove the slats from your gate, you press your knee on the slat until it bows out and the top starts to escape. You can then put another replacement slat in, essentially through reversing the knee process, you start with a bowed out slat and make it fit to the rails, then let it snap in
Greetings. Not doing anything with fences, just enjoy listening to you. Thanks. 👍
Lasts a life time some people do not last very long!!😃
Nice working
Good job
I had the volume maxed out to hear her, then of course the drill winds up being 20x louder than her, sheesh.
Thanks for vedio very informative
Good job
I know they try to simplify this for people but they take way too long installing these n u really don't wanna install the posts first...u should do them as u go along n dump concrete in dry then wet them in after...so your gonna mix up a bag in the wheel barrel for every post!?...work smarter, not harder
Any parts available to hold a vinyl self close gate open while you drive a mower through? Like vinyl gate hold back? I cant seem to find them anywhere.
Nice video, a tree fell down and damaged 2 sections of my pvc fence but didn't damage the post. Is there a way to install the middle pieces of the gate with out removing to post to install them?
Hi, don't know If you've solved this problem already, but you can remove the slats from your gate, you press your knee on the slat until it bows out and the top starts to escape. You can then put another replacement slat in, essentially through reversing the knee process, you start with a bowed out slat and make it fit to the rails, then let it snap in
Garbage in measuring each post with a measuring tape when it is smarter to cut a bit of timber at the right measurement between posts.
Will you help me do mine
what about on a 35 Degree slope?
Its extremely expensive here in Europe. About 2000$ for 30 square meters.
How dear is this stuff
could not hear her at all
🥰😍
No gravel for drainage in the bottom . Putting a pole in concrete will cause the pole to fill with water . She is Pretty though
What r u talking about ? Lol
Jajajajajajaj🤣🤣🤣🤣🤣🤣 it's better call some professional installer
You couldn’t do anything
Unless they have no winter season of freezing temps, then they installed the post WRONG!
Being in Australia I doubt freezing is a problem.
Hiw to install a picket fence
S Garr our winters here in Australia would be similar to your summers.