It looks so good I going to do that to mine I have a ceuze too I was debating the hole tail or half and now because of you I'm doing half thanks cant wait to do it
Thea Sanders hope it turns out good! Make sure to follow the steps.. up to this day they are still in good shape! Please give me a like and follow my Instagram page to let me know how it turns out! Slocruze14
How do you properly remove vht nite shade they put my coats on my tail lights and cant even see my brake lights on!! Any good recommendations for vht nite shade removal thats not going to ruin my tail lights??
Nice man I'm doing this to mine today. 3 questions? 1. Have you passed a inspection yet? 2. Did you do any sanding on it first? 3. If you removed it how hard was it?
1: this will not pass inspection but if you find the proper guy who can pass it for an extra cost he will pass it for you. (I have my guy who can pass anything for me) lol 2: no but make sure to clean them really good first! don't let no dirt or finger prints be on it. 3: It can remove easily, mine is still their. Takes a long time to come off. Still looks better than ever and its been like 5 months already.
@@hezequiel6598 YES I'M THINKING ABOUT DOING MINES EVEM THOUGHT IT'S GETTING COLD HERE IN ATLANTA. I JUST WANT TO MAKE SURE I DO IT RIGHT & USE THE CORRECT CLEAR.
Scuz Cruze tail lights take forever to remove , 4 screws on each inside tail light and 2 each on the outside light , to get there you need to pop off the trunk carpet and the carpet on the floor of the trunk to unplug the lights 😂
@@PoloZ34 taking your time to do all that stuff makes a difference, i. Going to be removing my bmw rear lights today to do this, makes the whole process easier with a better finish
I would have taken the extra step and removed the tail lights from the car first. That way, you didn't have to worry about masking around them or potentially getting overspray on the car.
Dude why did you paint so close, and you sprayed fast cause u didnt have the patience to wait and do this properly. Really bad man. Next time be patient and do a better job.
My boy is high af at the end 😆 🤣 😂
Came out great bro
Jeez buddy it’s supposed to be light coats, and ur supposed to let off when u change direction lol
Try letting off the button when you change direction when spraying. Thanks for the video
It was getting hard for me to watch when he wasnt letting off
No need to that’s what the plastic is for. That’s why U spray over the plastic. Or that’s what I’d assume. Just using my two brain cells God gave me.
Looks dope man! You should do another video of sanding it down then polishing it, would come out clean!
It looks great!!!
Looks very good
It looks so good I going to do that to mine I have a ceuze too I was debating the hole tail or half and now because of you I'm doing half thanks cant wait to do it
Thea Sanders hope it turns out good! Make sure to follow the steps.. up to this day they are still in good shape! Please give me a like and follow my Instagram page to let me know how it turns out!
Slocruze14
Your awesome man thank you
👌🏾I love people from CarolIna. Reminds me of my favorite show King Of The Hill when they talk! Good job on the spray👍🏾
Shit came out fire 🔥 doing my Infiniti m45 today
How about sanding before and after? Paint corrector and polish?
you di d a dam good job i am going to do this to my dodge ram instead of changing the them thanks
Looks good! Only thing is its a bit too dark for me id go lighter. Debating on doing mine I want to but I don't want it to look bad
Bless you 🤧
Good vid
Great. Job bro. Im gonna do my car
Bless you! 👍
Subbed 💪💪
How do you properly remove vht nite shade they put my coats on my tail lights and cant even see my brake lights on!! Any good recommendations for vht nite shade removal thats not going to ruin my tail lights??
You paint like the girls at my work. They can't paint. Lol.
U can also use newspaper and painters tape
why do 3 coat too dark .as well should that fast smoke out looking good led in turn singles and back up light
Just noticed your tags say NC which part. My club is based in NC
Helped a lot man, really need a chevy cruze mod page on youtube:P
Riley Gibson how did it turn out?
Did you think of tinting the white reverse lights instead of the red brake lights?
Joel Lozano I did it that way for safety reasons to not get pulled over. Plus looks so much better too.
What part of Nc you from
😂😂😂😂😂😂😂😭😭😭 This shit had me cryin!
Just did mine. Can u wash regularly. Or it'll mess up?
I wash mine as much as I can and it still looks good and hasn't worn out. You'll be fine even after a year of having it painted.
The clear coat will keep it from being rubbed off so should be just fine
Apriciate all the love. This was in fact my first UA-cam video but promise to get better at editing and explaining stuff more. Hope you enjoy!
Good jod look good were U get that stuff
Oscar Delgado you can get it at your local auto store. Try looking for this at O’Rileys
Tás cá com uma vontade vou te dizer
Nice man I'm doing this to mine today. 3 questions?
1. Have you passed a inspection yet?
2. Did you do any sanding on it first?
3. If you removed it how hard was it?
1: this will not pass inspection but if you find the proper guy who can pass it for an extra cost he will pass it for you. (I have my guy who can pass anything for me) lol
2: no but make sure to clean them really good first! don't let no dirt or finger prints be on it.
3: It can remove easily, mine is still their. Takes a long time to come off. Still looks better than ever and its been like 5 months already.
Sweet man thanks for the heads up. I live in Texas so hopefully if I use light coats and don't go to dark it will be ok. Thanks again.
No passed
DID YOU SAND YOUR TAIL LIGHTS BEFORE PANTING? OR YOU JUST PAINTED?
Yoster Amor no. Just cleaned them really good before I began the process. No sanding took place! Are you doing yours?
@@hezequiel6598 YES I'M THINKING ABOUT DOING MINES EVEM THOUGHT IT'S GETTING COLD HERE IN ATLANTA. I JUST WANT TO MAKE SURE I DO IT RIGHT & USE THE CORRECT CLEAR.
You don’t have to sand it , I have tinted a tone of lights in the past 9 years and neve sand it once just clean it good and spray
Justmil69 yeah I seen people wet sand but you don’t have too.. just clean and make sure there’s no finger prints on it..
👍
Did you use the clear coat before or after the vht
mario gonzales after. Just make sure to clean your tail lights really good. Make sure you leave no dust on them. Save the clear coat for last
@@hezequiel6598 do you need clear coat for this or just VHT
Brian Ermine clear coat protects and makes the VHD last longer..so I would use both clear coat and VHD
that clear coat is like plastic dip right?
Jose Caraballo not technically, it does stay in your car for a while tho. It’ll eventually come off within time
How many cans of vht did you use?
For My Lil 0ne just one bro
Thanks man
What’s is the name of the spay???
Funny Boy VHT nightshade bro
Left looks darker than the right
1st one is look better
Oyu Gates apréciate it man. Had to even it out lol
I’m finna do this same thing to my car
Gunner16325 good luck!
Shake the can bro.lol
Very sexy Bro
I have a Gold Chevrolet Cruze LS 1.8 gonna do my Back lights as well
3:45 Covi19 tail light
Easier to just remove your lights instead of taping off ur lights and covering ur whole rear
Scuz Cruze tail lights take forever to remove , 4 screws on each inside tail light and 2 each on the outside light , to get there you need to pop off the trunk carpet and the carpet on the floor of the trunk to unplug the lights 😂
PoloNoLogo fr i much rather just tape it up
@@PoloZ34 taking your time to do all that stuff makes a difference, i. Going to be removing my bmw rear lights today to do this, makes the whole process easier with a better finish
Hey, thank you for the help bro! What’s your Instagram
test registration slocruze man
Trabalho a labajao
I would have taken the extra step and removed the tail lights from the car first. That way, you didn't have to worry about masking around them or potentially getting overspray on the car.
Got to slow down lad you need to spend more time on prep and technique, overall that was massive dose of over spray on the car body and windows.
i noticed you luv ur car more than u luv ur lungs......look after 1 and you'll enjoy the other longer
Woulda been easier to take off the tail lights
Brandon Wright nah too many screws and bolts to take out.. much rather just mask it off
It looks good but I can tell ur not much of a talker
Good but overdone...
Never seen a vht video like this before ...really bad no sanding no pounding and no polish .
yikes. this is a how not to video. it was mislabeled.
Second of all why would you mod a Chevy. Cruze
cause it’s his car
Dude why did you paint so close, and you sprayed fast cause u didnt have the patience to wait and do this properly.
Really bad man. Next time be patient and do a better job.
terrible