Hey man, I just wanted to say, before I watch, that I'm glad you're doing better now, and don't worry about anything, we'll be here whenever you need us
Zeb Karlsson if you watch Crazy kens video, he wanted an SSD from him, and from the whole video call, he tries to find ways to hang up from him. Also at The end, he says to not call again.
Can confirm that SCSI2SD is amazing. I have two for my Power Mac 8600 and Quadra 700. While it is pricey, it would be even more expensive and risky to get a mechanical SCSI of the equivalent drive size.
This channel is some of the only kino left on youtube. I realized it's one of the few left where I look forward to seeing a new video. It's still very reminiscent of classic youtube.
7:52 SCSI drives need to be manually assigned IDs via a series of pins that are usually on the bottom or back of the drive, and they require a "terminator" device at the end of the SCSI cable. Especially if you're using multiple devices on one chain. Failing to terminate the SCSI bus can result in all sorts of weird behavior, as without termination the signals running over the cable can actually reflect back at the end of it and cause interference. This can cause anything from drives simply not showing up, to full on system instability or failure to boot.
...Judging by what's listed on the other SCSI bus, your problem is that both of your hard drives are assigned ID 0. Which means you don't have any jumpers on any of them. Terminating the very last row of pins with a jumper _should_ put the drive on ID 1 instead, which would solve the problem.
This post is the one I was looking for before I weighed in… I used Macs in the 90’s and getting the SCSI IDs sorted correctly was a pain. Also getting them in the right position on the chain was a pain. If you change the ID on the one you cannot see and still cannot see it, change the ID back to what it was and change the ID on the one you can see how. It’s a black art…
I love your videos. Your lack of knowledge, yet still plowing through the issues is very entertaining and frustrating at the same time, because you vocalize my thoughts when I was a noob to technology. Still a noob with mac and linux, so I'm right there with you on those videos.
4 роки тому+1
I don't know why but his videos are always so comforting and relaxing.
I'm glad you're feeling better to start posting videos again my man. I believe I speak for everyone when I say that we missed you and wish you nothing but the best!
3 Fans.... I called it seconds before you did lol Thanks for sharing this whole endeavour with us :) Quantum lightning? I bet those go bad in a flash ;)
How can i ever say thanks to druaga I've learned many things from him over the years and each video reminded me of the crazy stuff i do THANKS FOR EVERYTHING DRUAGA1 YOU ARE THE BEST
Omg he's back hope everything is okay man take you're time I'll wait for you I've been hooked since the minecraft win 98 video thanks for the laughs, the videos that keep me interested in tech and thanks for the amazing video style actually showing things from start to finish. Thanks for everything
That PSU crackling problem is actually pretty common with those machines from what I can hear. Apple got those special AcBel power supplies mega cheap and now we know why. I have the same model (G4 MDD Fw400) and mine has not yet failed, but if you're looking for a video, maybe do one on how to replace it? I'd love to know how so I can do it on mine before the motherboard is damaged
Bro, You don't need to worry yourself about not uploading anything...You always put out GREAT videos and whenyou return everytime I always know its gonna be good
Have you ever tried the Basilisk II emulator? It actually supports Mac II emulation with the right ROM, and you get to set all kinds of options, such as CPU type, RAM and screen resolution, AND it allows you to share a directory from the host system to the emulated Mac.
I have a SCSI-IDE adapter or two. Whatever I have, it came with old systems I bought off of Ebay. I even have one old Power Mac using that plus a 3.5"-2.5" IDE adapter to use a laptop hard drive in it. Works great!
I'm sure someone has already mentioned SCSI has 0-7 for IDs. Each device ID must be unique. Jumpers are usually next to the connectors. Also SCSI termination may need be set. Also, I have a drive which must be manually mounted. I still have FWB HardDisk Toolkit installed, which I use to mount and unmount.
Are you familiar with SCSI IDs and how they work? It doesn't matter if you have a CD-ROM and a hard drive on the same cable, but it will matter very much if you have conflicting SCSI IDs. Those are set by jumpers on the drive, kind of like how you set master, slave or cable select on IDE and ATAPI drives.
Hey dude if you need to take breaks like this, it's not my place to tell you not to. Above all else, your mental wellbeing is more important than whether I get to consume a video, please don't worry about it
Don't you just love all the jumper settings on SCSI drives? I had my first expierence with this not too long ago and felt the same way as you. "WTF is all this A0, A1, A2 stuff?"
i've seen a few people mention it already, but the sd2scsi is always an option also with the MDD, it's probably a bad power supply, its a common issue iirc
Glad you're doing ok man Also, something that you might wanna be aware of regarding SSDs, data stored in flash memory degrades over time when unpowered, cheap NAND can start to lose its data after as little as 2 years unpowered. Personally I'd keep a copy of it all on modern hard drive as well for more long term storage. Or if you have an old LTO drive or something similar it might be a good use for it, would be very overkill but oh well.
This reminds me, I have to somehow image my Macintosh LC475 drive, one method I thought about was using a SCSI card in a pc, and use the MacDisk program to do it
do you know if thear a way reset windows 7 make restore disk and one for 98 and xp i whant to make a torrent projet with every restore pc disk i can get
I have found scsi ssds, but none of them are under 600 bucks, there is also a scsi to sata adapter (ACARD ARS-2000SUP), if you can find one and they dont cost an arm and a leg
instead of risking old mac hardware rescuing drives I would suggest dumpster diving an old PC and a dirt cheap scsi card, then using linux and ddrescue to clone the drive to an image file, then copying the contents out of the image using an emulator like sheepshaver or basilisk - ddrescue is great because it has lots of control over how long it should try to read the data, it uses a strategy where it reads the easiest data first then goes back to bad sectors and tries a bunch more times to get the missing data
The return of druaga. This will be a remembered moment in history.
For the 50th time .... xD
like october 1, 1949
Hey man, I just wanted to say, before I watch, that I'm glad you're doing better now, and don't worry about anything, we'll be here whenever you need us
yes HE LIVES
HE EVEN UPLOADS
your videos are so unique and heartful druaga, thank you for this.
His videos are NOT UNIQUE!
Just check out The Computer Clan channel
@@fargeeks ...
I think you missed 1/4th of this channel
fargeeks You prob don’t know why Druaga hates Ken from the Computer Clan, don’t you?
@@WantBadtime Huh, he does? Why?
(Genuinely interested)
Zeb Karlsson if you watch Crazy kens video, he wanted an SSD from him, and from the whole video call, he tries to find ways to hang up from him. Also at
The end, he says to not call again.
SCSI2SD is good to replace SCSI drives with and it can even emulate the "quirks" of apple SCSI drives.
Ubuntu reads and writes HFS drives fine.
I have several myself, the only downside is the price.
> ubuntu
Can confirm that SCSI2SD is amazing. I have two for my Power Mac 8600 and Quadra 700. While it is pricey, it would be even more expensive and risky to get a mechanical SCSI of the equivalent drive size.
Omg. The man has posted.
Time to drop everything.
But not the j a r
I might threw one tho
This channel is some of the only kino left on youtube. I realized it's one of the few left where I look forward to seeing a new video. It's still very reminiscent of classic youtube.
7:52
SCSI drives need to be manually assigned IDs via a series of pins that are usually on the bottom or back of the drive, and they require a "terminator" device at the end of the SCSI cable. Especially if you're using multiple devices on one chain.
Failing to terminate the SCSI bus can result in all sorts of weird behavior, as without termination the signals running over the cable can actually reflect back at the end of it and cause interference. This can cause anything from drives simply not showing up, to full on system instability or failure to boot.
...Judging by what's listed on the other SCSI bus, your problem is that both of your hard drives are assigned ID 0. Which means you don't have any jumpers on any of them. Terminating the very last row of pins with a jumper _should_ put the drive on ID 1 instead, which would solve the problem.
Here's a page with jumper settings. kz1000b.com/pc/jumpersettings.html
Also, damn I wish I could get some old Macs again.
This post is the one I was looking for before I weighed in… I used Macs in the 90’s and getting the SCSI IDs sorted correctly was a pain.
Also getting them in the right position on the chain was a pain.
If you change the ID on the one you cannot see and still cannot see it, change the ID back to what it was and change the ID on the one you can see how.
It’s a black art…
I watched this entire video while my macOS Update had “less than one minute remaining”
The Lengend of computing has returned.
The Scsi2sd adapter is the closest I've found for a SCSI replacement. I've got one in my Macintosh SE.
I had to buy a lot of 70 SSD's for work and it reminded me of your videos. Glad your still around!
I love your videos. Your lack of knowledge, yet still plowing through the issues is very entertaining and frustrating at the same time, because you vocalize my thoughts when I was a noob to technology. Still a noob with mac and linux, so I'm right there with you on those videos.
I don't know why but his videos are always so comforting and relaxing.
Hey Druaga1, Smokers here.
mrnoobypoop Hey here, Druaga1 Smokers
Exactly. He seems to have sorted himself out lately:p
here smokers1 druaga hey
Love you man, so happy you were able to make a video
I'm glad you're feeling better to start posting videos again my man. I believe I speak for everyone when I say that we missed you and wish you nothing but the best!
Miss you Ian. You are a big help to my depression. I love your channel don't ever give up on it
3 Fans.... I called it seconds before you did lol
Thanks for sharing this whole endeavour with us :)
Quantum lightning? I bet those go bad in a flash ;)
Literally stopped what I was doing when I saw the notification you uploaded this so I could watch. Hail Druaga!
How can i ever say thanks to druaga I've learned many things from him over the years and each video reminded me of the crazy stuff i do THANKS FOR EVERYTHING DRUAGA1 YOU ARE THE BEST
Omg he's back hope everything is okay man take you're time I'll wait for you I've been hooked since the minecraft win 98 video thanks for the laughs, the videos that keep me interested in tech and thanks for the amazing video style actually showing things from start to finish. Thanks for everything
You have a job at least. That's important in these difficult times.
Always great to see some new shit from this very unique channel!
The king has returned
fug someone already said it
@@Sazoji well.. didn't said enough XD
nice to see you back Druaga its almost iconic im watching you on a mid 2007 imac im piecing back together after a sour drop
The hard drives make wonderful music to my hears.
Glad you are back ❤️. I hope you are taking some time to de-stress a bit.
Our lord has returned. Hey Drauga1 smokers here. We love you.
I've been revisiting a buuuuunch of old favorites the last few nights, and then this. bless.
Smokers are Here XD
Welcome back, dude! Glad to see a new video from your channel.
Welcome back, Sir of Sirs! Stay safe! :)
Bruh I thought this was a recommended from 2016. Nice to see you again here.
"IT WORKS NOW!" Perfect comedy
That PSU crackling problem is actually pretty common with those machines from what I can hear. Apple got those special AcBel power supplies mega cheap and now we know why. I have the same model (G4 MDD Fw400) and mine has not yet failed, but if you're looking for a video, maybe do one on how to replace it? I'd love to know how so I can do it on mine before the motherboard is damaged
I was just watching some of his old videos and pop, a new one. Hot diggidy daffodils it's my night
SD>SCSI exists! LGR has one.
They tend to cost a lot more than their IDE counterparts though
@@gustavgurke9665 but are more reliable
My man computer Jesus is back! Hallelejuah!!!
your house ambience is amazingly calm when you run these old machines.
Welcome back, man!!! I have missed you on UA-cam!!
Bro, You don't need to worry yourself about not uploading anything...You always put out GREAT videos and whenyou return everytime I always know its gonna be good
Have you ever tried the Basilisk II emulator? It actually supports Mac II emulation with the right ROM, and you get to set all kinds of options, such as CPU type, RAM and screen resolution, AND it allows you to share a directory from the host system to the emulated Mac.
I looked it up, and those HFS (Mac OS Standard) images *WON'T* work in Catalina, which dropped support for reading HFS.
Good to hear from you dude, and no pressure. As a fellow possessor of old macs, this is the content I crave.
Golden as always. Hope you get well, looking forward to your next upload, but take as much time as you need.
Hey Druaga, smokers here, and today we will be watching your video
I have a SCSI-IDE adapter or two. Whatever I have, it came with old systems I bought off of Ebay. I even have one old Power Mac using that plus a 3.5"-2.5" IDE adapter to use a laptop hard drive in it. Works great!
Second, really needed this thanks for the upload.
I'm sure someone has already mentioned SCSI has 0-7 for IDs. Each device ID must be unique. Jumpers are usually next to the connectors. Also SCSI termination may need be set.
Also, I have a drive which must be manually mounted. I still have FWB HardDisk Toolkit installed, which I use to mount and unmount.
Wooooo. Any video from you is worth the wait!
That lamp kicks ass. I have a pair of those speakers with the foam rotted out. I think I have a new project to do.
Are you familiar with SCSI IDs and how they work? It doesn't matter if you have a CD-ROM and a hard drive on the same cable, but it will matter very much if you have conflicting SCSI IDs. Those are set by jumpers on the drive, kind of like how you set master, slave or cable select on IDE and ATAPI drives.
welcome back stoner broner, missed you man, dont work to hard, love ur content
Hey dude if you need to take breaks like this, it's not my place to tell you not to. Above all else, your mental wellbeing is more important than whether I get to consume a video, please don't worry about it
UA-cam recommendations did something good
Don't you just love all the jumper settings on SCSI drives? I had my first expierence with this not too long ago and felt the same way as you. "WTF is all this A0, A1, A2 stuff?"
I swear mini vMac sounds like a Rapper's name
i've seen a few people mention it already, but the sd2scsi is always an option
also with the MDD, it's probably a bad power supply, its a common issue iirc
Came here for no reason, stayed for the sewaring, laughed at the "poop" and "other shit" folders.
this image feels like it was recorded in 2009 but it's from this year.....
Finally my SSD dad is back
Glad you're doing ok man
Also, something that you might wanna be aware of regarding SSDs, data stored in flash memory degrades over time when unpowered, cheap NAND can start to lose its data after as little as 2 years unpowered. Personally I'd keep a copy of it all on modern hard drive as well for more long term storage. Or if you have an old LTO drive or something similar it might be a good use for it, would be very overkill but oh well.
Holy shit. Druaga lives again. It's awesome to see you, hope you're fine!
Is that a lamp made out of mac mini at 7:16 ?
The legend lives!
I'm REALLY glad you're doing well. I was thinking about you the other day, and was worried that you weren't doing well.
We have you back yay this Is a great day for a druaga1 video
A new Video !? And that on my birthday ! Thanks for making a boring day that I cant celebrate with my friends a lot better
HOLY SHIT IT'S BEEN SO LONG. MY MAN LIVES
FINALLY THE WORLD'S BEST UA-camR IS HERE!!!!
that mac that he's using to image the HDDs is a Power mac 7500 from 1995 with Mac OS 8.1
I looked it up, iMac G5 replacement panels aren't that expensive. I wonder if you can get an even better panel to replace it.
How'd your room not catch on fire?
This reminds me, I have to somehow image my Macintosh LC475 drive, one method I thought about was using a SCSI card in a pc, and use the MacDisk program to do it
Still Rocking it Druaga!
do you know if thear a way reset windows 7 make restore disk and one for 98 and xp i whant to make a torrent projet with every restore pc disk i can get
The man, the myth, the legend: Mr. Druaga1
Hot damn! He lives!
Am I wrong to think that on OS9 you can always start up via Firewire or Ethernet and that you should put masking tape on the USB ports anyway?
They do have 50 pin SCSI to SD card and CF adapters, they are kind of prohibitively expensive though ~$100 USD.
glad that this was the topic for the "come back" video :)
Great to have you back smoker!
Dang i want one of the last ppc macs with os 8x on it, just to play some old games and nostalgia.
Great to see you back!
I’m late as hell, but any chance of uploading these images to either archive.org or some kind of sharing site?
"It's super simple!"
Proceeds to explain how complicated it is
Ofc
Bass playing video when
I remember these seek and motor sounds in the Far Cry 2 game
THE MAN THE MYTH THE LEGEND
I have found scsi ssds, but none of them are under 600 bucks, there is also a scsi to sata adapter (ACARD ARS-2000SUP), if you can find one and they dont cost an arm and a leg
Thank you for returning!
I died at the 3 fans part FIIIIRRRREEEEEBAAALLLLLL
they are out there but they are expensive, search on e-bay scsi2sd and you will understand
Hey homie hope you doing good, consider bluescsi for scsi drive replacement, Im sure you have heard of it but look it up if you havent.
Welcome back brother. I've missed your videos! I hope you're doing well.
The return of the legend
I hit 4:20 at 4:20 scsi to sata might be of use
Awesome, he’s back
instead of risking old mac hardware rescuing drives I would suggest dumpster diving an old PC and a dirt cheap scsi card, then using linux and ddrescue to clone the drive to an image file, then copying the contents out of the image using an emulator like sheepshaver or basilisk - ddrescue is great because it has lots of control over how long it should try to read the data, it uses a strategy where it reads the easiest data first then goes back to bad sectors and tries a bunch more times to get the missing data
WOOOOO NEW DRUAGA VIDEO