Changed all my bulbs 2 days ago on my 22 F250. Didn’t take any of that apart. Just went on behind the wheel liners on each side. Driver side top bulb from under the hood. No need to do all that. Took me 20 minutes tops.
You missed the step where you loosen the light collar and rotate the collar to align the led chips to the 3 and 9 o'clock positions. The vast majority of people who install led's don't do this then get upset at the washed out light, weak light, or light blinding oncoming traffic.
This is absolutely hilarious you do not have to remove the headlights to change the bulbs. You simply remove the washer fluid tank filler neck and on the passenger side you remove the intake snorkel.
Bro nice video but you can remove drivers side bulbs just by reaching behind no need for any removal. The passenger side just pop out air filter and box lifts up to access bulbs. The factory bulbs in these are terrible even with 4 bulbs all H13 on a 2022 BTW. Good video for replacing lenses though!
Great video but this is ridiculous. These car companies shouldn’t make it where you need to be a certified mechanic to change a headlight. Lots of things could go wrong doing this such as clips breaking etc. Everything keeps getting more ridiculous.
Dude, why didn’t you take the radiator off, then you could get the compressor out of the way too. While you’re right there if you remove the belt and the water pump you can put a cot in there and take a nap for all the comments you surely knew you were coming.
This entire video is wrong on the passenger side of the truck there is one clip pen in the middle you remove it and on the sides of that intake box or two tabs You've squeeze them in and it slides out of place you can then reach your hand down and remove all four bulbs by twisting them to the left depress the clip holding the plug to the bulb and voila on the driver side you should be able to look down right by the washer fluid and see the bulb and harness plugging into the back of them twist them to the left and depress the clips holding the harness to the bulb I just did it an hour ago after watching the video and thinking I have my work cut out for me however you do need skinnier arms I'm 140 lb I don't think a 300 lb man would be able to fit his arm down in the space to do the job
Changed all my bulbs 2 days ago on my 22 F250. Didn’t take any of that apart. Just went on behind the wheel liners on each side. Driver side top bulb from under the hood. No need to do all that. Took me 20 minutes tops.
How
@@alanramirez4165 literally explained how in the comment.
@@alanramirez4165 ua-cam.com/video/2xRBXwkOT7Q/v-deo.html
Thanks Bro.
I just did the exact same thing 2 minutes ago 😂😂😂 and was curious on how the good ol UA-camrs had done. 😂😂😂
Thanks JJ for your video, was very helpful in completing my bulb replacement. The hint about dropping the bumper was extremely beneficial.
Glad it helped
Remove the battery and washer fluid spout on drivers side. Remove the top shroud and air inlet scoop on passenger side. Can reach all bulbs.
Done.
You missed the step where you loosen the light collar and rotate the collar to align the led chips to the 3 and 9 o'clock positions. The vast majority of people who install led's don't do this then get upset at the washed out light, weak light, or light blinding oncoming traffic.
Thanks for the quick video, saved me some time and money!!!!
Thank you! I was fighting the bulbs for a bit then I heard you say there may be an extra seal 🤦🏽♂️🤦🏽♂️
This is absolutely hilarious you do not have to remove the headlights to change the bulbs. You simply remove the washer fluid tank filler neck and on the passenger side you remove the intake snorkel.
The Battery sits in front of the Head light
You are 100% right . That’s how I change mine as well. Super easy to change the bulbs. Not sure why so many think you gotta remove the headlights.
Thanks homeboy! Appreciate the help and I definitely noticed the Texas license plate. Keep up the good videos fam!
Great video it will definitely help me change mine.Thx.
Glad it helped
Excellent video my friend!
Thanks bud great explanation easy install thanks to you!
Can you post a link or product number to the bulbs?
Great video!
Bro nice video but you can remove drivers side bulbs just by reaching behind no need for any removal. The passenger side just pop out air filter and box lifts up to access bulbs. The factory bulbs in these are terrible even with 4 bulbs all H13 on a 2022 BTW. Good video for replacing lenses though!
Will those bulbs fit a 2022 f350 xlt
@@ryanmccay9625 Yes
Great instructional video.
Appreciate it!
On the link you provided for the bulbs what one am i so post to get. I se option or booth ?
Excellent video. Thank you for this.
No problem
Bro thanks for the video, excellent… question the link of the lights are for the Ford right? I mean, I just click buy and that's it
Appreciate it that man, yes the link is for these bulbs you saw me install.
@@JJBanuelos ok ok, thanks bro and God bless you.
This headlight possibly install on f550 2023?
High bean and low beans the same bulb?
Hay man I follow the link you shared for the LED like you used. They don’t fit the truck. It’s a two prong plug and the truck is a three prong plug.
I’ll have to look at the link sometimes they change the products. Thanks for the info
Nice video thanks
Appreciate it!
Wow, you just made your truck that much more blinding. I can't believe the stock lights are even legal.
The lights you have linked are sold out. You have a link to a set that will work?
I’ve had great results from these as well.
amzn.to/328hFjj
@@JJBanuelos are they really that good ?
Will these bulbs fit in my 2022 f250
I don't understand why you went through all of this when you can get them fairly easily behind the air filter
Great video but this is ridiculous. These car companies shouldn’t make it where you need to be a certified mechanic to change a headlight. Lots of things could go wrong doing this such as clips breaking etc. Everything keeps getting more ridiculous.
This should be the same for a 2017 f550 yes?
Possibly the front ends are kind of the same
yes it is a great video But is it really necc ro remove head lamp assembly as can gain access to bulb simply by tilting head lamp down from top
Unfortunately that’s not possible on these trucks.
Bro how come everybody has these plugs I have the one with 6/7 wires so weird
I assume this is the same for a f350?
Correct same process & products
Not the right link for bulbs
Dude, why didn’t you take the radiator off, then you could get the compressor out of the way too. While you’re right there if you remove the belt and the water pump you can put a cot in there and take a nap for all the comments you surely knew you were coming.
This entire video is wrong on the passenger side of the truck there is one clip pen in the middle you remove it and on the sides of that intake box or two tabs You've squeeze them in and it slides out of place you can then reach your hand down and remove all four bulbs by twisting them to the left depress the clip holding the plug to the bulb and voila on the driver side you should be able to look down right by the washer fluid and see the bulb and harness plugging into the back of them twist them to the left and depress the clips holding the harness to the bulb I just did it an hour ago after watching the video and thinking I have my work cut out for me however you do need skinnier arms I'm 140 lb I don't think a 300 lb man would be able to fit his arm down in the space to do the job
The lights in the link is for a 2 prong light don't order
What a cluster fuck just to change some bulbs. Sheesh
Tell me about it, they don’t make them like they used too
Garbage did show me what I need to see
Great video, and stupid engineering. Ford manufacturer ran out of people with good ideas