Hi guys, there are more OpenWRT tutorials, feel free to check out the playlist here: ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html. Also, English subtitle is available now.
Amazing Infomation. It took me a long time to learn some of all these (which you provided here easily) and I still found new ones here. I wish I found this earlier. It would have save me a lot of stress. Kindly do more advance stuff for us like installation of luci-app-nft-qos, Sierra Wireless MC7455, moving the menu around, like to the left hand side, blacklist/Whitelist of MACs, etc etc. Thumbs up man.
Hi, thanks for the kind words and glad it was helpful! I will try to make more videos. Regarding the Sierra Wireless MC7455, there is a tutorial. Do you have any problem with the configuration? forum.sierrawireless.com/t/help-with-mc7455-in-openwrt-router/8919/2
Really well done in creating your on-going OpenWRT video's! As my router is slowly dying, I am dusting off an old PC and getting hold of a 2nd NIC, all to have a go at creating a desktop PC as a router :) Thanks for the inspiration!
Thanks for the feedback. Actually you can run OpenWRT with single network port and a switch that supports VLAN (however I still recommend 2 different NIC for WAN and LAN). There are also other OpenWRT tutorials on the channel including OpenWRT on x86, give it a shot if you need any video guide on the installation process.
@@VanTechCorner cool, does the latest x86/pi4 have [the newish] r8125 2.5Gbit/s usb3 add in modules so as to beef up the lan side speeds at least ? -there's also a usb3 5Gbit/s driver too, although i forget its chip name [not the hardware broken intel 2.5/5.0 ones] perhaps these are compiled openWRT hardware offload modules TOO-
This is an excellent tutorial. I am attempting to connect "again" my BTHomeHub5, running OpenWRT 21.0.2, to my VDSL IP (Plusnet - UK), using the vdsl input into the modem/router coming from the exchange. I had managed to do it a couple of days ago, but it s quite fiddly at connecting to the net (I can sync with the exchange, but, despite following these instructions, I need to create a new dsl0.101 interface - needed by Plusnet, and I am not clear of what else it is needed in the OpenWRT settings).
Hello and sorry for the late response. I don't have a chance to play with VDSL and I am not really sure what is the best advice. I found a guide on OpenWRT forum and people are saying it is working. Perhaps you can give it a try forum.openwrt.org/t/connecting-to-plusnet-with-openwrt/89280/18
Great to hear that. You can check out other tutorial regarding OpenVPN, Wireguard VPN with OpenWRT at this playlist ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Thank you. This is the very first video with OpenWRT I made. There has been 90+ new tutorial, you can check them out at this playlist ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Hello, i see you are using linux cmd, is there a way to do that same from windows10? (Through a program or cmd). The following question is how to get a certificate on the router which has to be used for connection to the internet (a hotspot which asks for certificate .pem) (there is no ethernet connection possible to the internet, no line) Thanx in advance and nice video.
Hi thank you for the wonderful tutorial, I currently have a Netgear r7800 and a Archer C7 I want to set up the r7800 as my primary router then have the Archer c7 connected as an AP is this where you showed how to set up wireless AP? Sorry I am very new to this
Sir can you please make a video on openwrt WISP mode Mac address change actually I'm using openwrt firmware and I was connected via wisp mode to another wifi but unfortunately my Mac address had been blocked by the another wifi router and I want to change my wisp mode Mac address (wwan) . The thing is I can able to change LAN Mac address but when I override (wwan) Mac address it will automatically set default Mac address which was blocked by another router please help me Thank you
Lol, this was my very first video regarding OpenWRT. At this time, my English was not good (still now, haha). Anyway, I made a lot of friends who is using OpenWRT along the ways and a lot of tutorials had been done, you can check them out in this playlist ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
greetings, great video, thank you, i've just finally gotten onto openwrt and noticed the latest build or release (21.02.2) has quite a few changes on its UI, i.e. setup of static IP (is that essentially the same as static routes ?), the port forwarding section, etc... also, should i enable IPv6 or not, running old generation adsl copper line at 6 Mbps (download) and 600 Kbps (upload)
Hi, this video was made long time ago. You can go to my channel homepage to see more recent videos, or check out the OpenWRT tutorial playlist ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Thank you for this good tutorial! I want to use the realtime graphs of OpenWRT (wireless signal, noise) for a special projekt. Is it possible to read out realtime the data of signal and noise? If yes how to do it?. It would be great, because I want to steer a wlan directional antenna with a stepmotor based on the routerdata. thank you for your kind repley in advance
Hi. Can you show how you flashed your DIR-842 with OpenWRT? Because there is just snapshot version and no official release. So getting Luci packages to install in the DIR-842 in offline mode is a hassle for people with only 1 router. Thanks.
Hi, I have more then 1 router and the process is very simple. However, if you are having only 1 router you can use SSH to set it up: - Setup your WAN interface (DHCP, PPPoE) by editing /etc/config/network or using uci commands - Setup your OpenWRT as AP client - Once there is a working internet connection, run opkg update & opkg install luci and that is.
Hi big!!! Thank you for this fantastic guide. But can I ask you a thing? On WAN interface I've put PPoE and it doesn't work...instead with DHCP it works.. can I ask why? As second question .. I would like to know why we put PPoE on the router too if we have already set it on modem. Thank you so much...i have fttc fiber
Hi, I am not really understand your question, please provide more info about your actual network setup and the devices you are using, if you want to discuss more about it here. You need to find out which protocol is used by your network provider and then configure the same on OpenWRT. For example, the ISP provided a router and deploying the internet using PPPoE. Now, if you want to replace their router with a new one running OpenWRT, you need to setup your WAN interface as PPPoE Client. Most of the network providers are using a GPON router + PPPoE where the device is connected to the fiber cable and act as a optical network terminal, as the same time running PPPoE to establish the internet connection. This is just the first video in my OpenWRT tutorial playlist, to know more you go to the channel homepage and have a check.
@@VanTechCorner hi, thank you for your interest. I have a modem (FTTC) and a router Liksys with openWRT installed. so I have two different nets. (192.168.0.0 where the modem is 192.168.0.1 and second net 192.168.1.0 where openwrt router is 192.168.1.1). on my modem I've already set my PPPoE configuration. the problem is that whether I connect with dhcp to my modem is ok, if I try to use PPPoE directly to ISP the connection goes DOWN. I don't understand...it's like a double PPPoe... :( I hope it is enough. thank you. have a nice day
I see, so you got my answer above. In this case it is not just the modem, I assume it is a GPON router which convert the optical signal to electronic signal, and then running PPPoE to establish the internet connection. Of course you can't simply replace the ISP router since they only accept their own device (by checking the MAC, the SLID and maybe serial number when it is trying establish the PPPoE connection). You can contact your ISP if you want to do so.
My router doesn't get assigned IP ad from ISP on WAN. But if i connect cable directly to computer i get IP and internet as a result, do you know where i should look to get ip assigned ?. I can see TX status sent pockets out, but Rx 0 pockets in.
Hi, can you tell me more about your network setup (how devices are connected) or the internet plan and provider you are using, perhaps I can do something about it. "if i connect cable directly to computer i get IP" => do you mean the PC is directly connected to the optical network terminal or something different?
@@VanTechCorner ISP=>Modem=>Router=> NO IP Assigned (i112.fastpic.ru/big/2020/0825/46/ed32db81402e7eff2747364c6452d246.png), but if ISP=>Modem=>PC i get internet.
Are you sure that your PC is connected to the modem or it is a GPON router. Maybe you can do ipconfig/all in your computer to get the IP and gateway information, and setup these info in your Openwrt WAN interface.
17:00 i have fibre broadband and modem, but my ‘network’ in status shows ipv4 and ipv6 upstreams. And when i try to configure pppoe it says connection failed and internet dies. Without configuring pppoe default is dhcp and it works fine with it. Can u tell me in what cases should i try to configure pppoe? I want my new openwrt wifi router to handle everything and isp modem to do the least. Pls reply someone?
Question; why did you install it on a very simple and light router such as the TL-WR841N? The OpenWRT page says this router is no longer supported as of 2091 due to its very low hardware specifications. Can I still install OpenWRT on a router such as the TL-WR841N?
Hi, this is the most simple/ cheap device to start with and if something goes wrong, you can find a replacement easily. Even the router is no longer supported (no new updates), the old versions are working fine. You can check out this playlist to find out other OpenWRT tutorials, including the installation on x86 PC, Mikrotik and DLink routers - ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Hi, thanks for the comment. There are other OpenWRT tutorials, let's check it out. OpenWRT supports 802.11r (Fast-Roaming) and you can install wpad to configure that.
I need you help about the topic: Port forwarding and Static IP on OpenWRT. On the new version of the OpenWRT (19.07.4) for Static IP Adress, have a option with name: DUID. What would it be? Do I need to add anything to it? Thanks for this video.
how to configure openwrt so it all interfaces are dhcp disbled, new interface added: "relay_bridge" protocol: relay birdge, networks lan wwan, and then lan devices must recieve ip from upstream dhcp which also gives ip to wwan interface. Currently my lan device fail get ip automatically, but when I enter Ip parameters to fit into upstream subnet then it this lan computer has internet.
Hi Mate, i think your mike needs an upgrade, it sounds tinny. Your great skills are suffering from the overall sound quality, so please do something to improve the sound for all listeners!
Hi, could You just tell me if this is possible to change transmit power above standard for example like in mikrotik router boards?? I have tp-link archer c7 and I'm thinking about put oper firmware mainly for this reason
Hi, for Maxis you need to check if they are using VLAN for PPPoE or not and set up the same on OpenWRT. I have made video with PPPoE with VLAN as well, you can check it out.
Hi, I recently installed OpenWRT on my Archer A7 V5, but now I can't restore the original firmware, I tried with TFTP 192.168.0.66 and the Recovery file, but stay at 94-96-98%, any advice?
Hi, you can upgrade the firmware using LuCI and tick the box "Keep the configration value", it will keep you your configurations but the apps will be deteled for sure.
Hello sir, can i set up multiple vpn that connect simultaneously in openwrt router ? I want use 2 different vpn simultaneously, 1 for my pc and other for my xbox.
27:50 Do you know if a Pi 4 can be an AP and a Wifi client at the same time? Also I noticed that to make a Pi 4 an AP over 2.4GHz I had to set the Mode to "Legacy".
@@VanTechCorner Brilliant, thank you! I'm using the snapshot image: openwrt-bcm27xx-bcm2711-rpi-4-ext4-factory.img.gz on a Pi 4 which I downloaded a few days ago.. around Nov 28th. I also posted a question on the OpenWrt forum here: tinyurl.com/yymenh29 So far I could only get the Pi 4 to be a Wifi Access Point OR a Client, not both at the same time. I'm interested to know if you can get that working. Cheers.
@@VanTechCorner I guess you didn't get a chance to try this out? A mod on the OpenWrt forum says it is not possible on a Pi 4. preview.tinyurl.com/yyg2dlpa
Hey, LEDE/OpenWrt had merged to become one. This video was made long time ago, and the information is out dated. You can check out my recent videos for more information.
Hello, I really like your videos and I have found them useful, I already have a router with openwrt, but I want to buy another one with more flash memory, and more powerful, which models and brands could you recommend, I am in America and I have no access to European brands, I could buy it on amazon or aliexpress. Hello, I really like your videos and I have found them useful, I already have a router with openwrt, but I want to buy another one with more flash memory, and more powerful, which models and brands could you recommend, I am in America and I do not have access to European brands, I could buy it on amazon or aliexpress,
Can install driver wifi on laptop or mini pc with open wrt? I have mini pc from intel, then i install open wrt on my mini pc, but interface read only ethernet
Hi, You need to install firmware and driver for the wireless card. There is already a tutorial on how to configure a wireless network card, you can check it out if need further information.
Hi, could you tell me what is the hardware version of the router. This is th URL for the hardware version 1 which has MediaTek CPU. openwrt.org/toh/hwdata/asus/asus_rt-ac57u
i have installed open wrt on my tplink wr 840n i conect it as a wifi repeater but when i scann wifi networks the signal was very low of my 2nd wifi before open wrt it was 67% now it scann that wifi network the signals shows only 32% also the transmit power is very low it cant cover my little store room i put router there when i sit near router it gives 60% sgnal how can i resolve this
Hi, I would suggest to check the channel of the main AP and optimize it. Can you use an Wireless Analyzer app on your smartphone and check the signal. If you could provide some more info and photo I will try to help.
Hi, this VLAG tagging can be easily configured in Network - Switches. Can you upload the screenshot of that page to pictr.com or Google drive and share the link, I will have a check on that.
@@VanTechCorner is it worth to install open wrt on tp link provided by unifi? I'm trying to combat bufferbloat and my router has qos but it doesn't help at all. Will openwrt sqm help? My router is a archer c1200
Different routers have different way to debrick. You can check out this document openwrt.org/docs/guide-user/troubleshooting/generic.debrick, or find the way to debrick on the device techdata page.
It is the PAP/CHAP password that was provided by your ISP. Usually you can see it on the contract, or login to the current router and check the "PPPoE connection" setting.
Can you tell me what you are doing with the WAN interface? If the router is connected to the ONT/ modem, I assume the protocal should be PPPoE instead.
@@VanTechCorner i have redmi ac2100, i want to install openwrt cuz so many bug after update to new stock firmware but this router can't install openwrt from (upgrade firmware) like ur video.
Hi, you can check out other tutorials about OpenWRT for free. There is no courses and all of them are for free. ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Are you sure. I am using OpenWRT, pfSense, RouterOS and Cisco IOS. To me, OpenWRT is user friendly and you can set it up from the first time login. RouterOS is not easy to configure unless you have some knowledge of networking.
Hi, if you watch the video with the PC the text is clearer. In the recently videos, I made the CLI text bigger, you can check them out here ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Do you know that you are comparing a paid OS to an open source OS. I have been working with Cisco IOS, OpenWRT and Router OS and OpenWRT GUI is the most user friendly. How many steps you need to do to have a working Wifi on a Mikrotik router and let's compare it to OpenWRT ...
Hello, I have the belkin f9k1103 router, I've wanted to install Openwrt for a long time but I can't find the way, I tried fw f9k1109 but the wifi doesn't work ... any ideas to install 3rd party firmware?
Hi guys, there are more OpenWRT tutorials, feel free to check out the playlist here: ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html. Also, English subtitle is available now.
Amazing Infomation. It took me a long time to learn some of all these (which you provided here easily) and I still found new ones here. I wish I found this earlier. It would have save me a lot of stress. Kindly do more advance stuff for us like installation of luci-app-nft-qos, Sierra Wireless MC7455, moving the menu around, like to the left hand side, blacklist/Whitelist of MACs, etc etc. Thumbs up man.
Hi, thanks for the kind words and glad it was helpful! I will try to make more videos. Regarding the Sierra Wireless MC7455, there is a tutorial. Do you have any problem with the configuration? forum.sierrawireless.com/t/help-with-mc7455-in-openwrt-router/8919/2
@@VanTechCorner Yeah. I want to install it on OpenWrt. But I will check the link. Thanks.
Really well done in creating your on-going OpenWRT video's!
As my router is slowly dying, I am dusting off an old PC and getting hold of a 2nd NIC, all to have a go at creating a desktop PC as a router :)
Thanks for the inspiration!
Thanks for the feedback. Actually you can run OpenWRT with single network port and a switch that supports VLAN (however I still recommend 2 different NIC for WAN and LAN). There are also other OpenWRT tutorials on the channel including OpenWRT on x86, give it a shot if you need any video guide on the installation process.
@@VanTechCorner cool, does the latest x86/pi4 have [the newish] r8125 2.5Gbit/s usb3 add in modules so as to beef up the lan side speeds at least ?
-there's also a usb3 5Gbit/s driver too, although i forget its chip name [not the hardware broken intel 2.5/5.0 ones] perhaps these are compiled openWRT hardware offload modules TOO-
I'm curious about OpenWRT, and this video explain it very well. Thank you
Great video. Helped me solve my issues in which the wiki wasn't useful.
Great to hear! There alot of OpenWRT tutorials waiting for you, check it out ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
This is an excellent tutorial. I am attempting to connect "again" my BTHomeHub5, running OpenWRT 21.0.2, to my VDSL IP (Plusnet - UK), using the vdsl input into the modem/router coming from the exchange. I had managed to do it a couple of days ago, but it s quite fiddly at connecting to the net (I can sync with the exchange, but, despite following these instructions, I need to create a new dsl0.101 interface - needed by Plusnet, and I am not clear of what else it is needed in the OpenWRT settings).
Hello and sorry for the late response. I don't have a chance to play with VDSL and I am not really sure what is the best advice. I found a guide on OpenWRT forum and people are saying it is working. Perhaps you can give it a try forum.openwrt.org/t/connecting-to-plusnet-with-openwrt/89280/18
The explanation was very clear and easy to follow.
Thanks for the comment. You can check out other tutorial in this playlist ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Nice Videos, Thanks for sharing and still very relevant! You are helping me a lot as I begin my OpenWRT / OpenVPN journey!
Great to hear that. You can check out other tutorial regarding OpenVPN, Wireguard VPN with OpenWRT at this playlist ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Thank you. You are a good person.
Thank you too! You can also check out other OpenWRT tutorials in this playlist - ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Giọng accent Vietnoy nghe phát nhận ra ngay. Thanks bro, video rất bổ ích
Thanks for the great video. Full of useful information about OpenWRT!!
Glad it was helpful!
Amazing.. thank you for useful video.
You are most welcome!
Thanks brother for your effort
Thank you. This is the very first video with OpenWRT I made. There has been 90+ new tutorial, you can check them out at this playlist ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Very helpful. Thank you!
Hello, i see you are using linux cmd, is there a way to do that same from windows10? (Through a program or cmd). The following question is how to get a certificate on the router which has to be used for connection to the internet (a hotspot which asks for certificate .pem) (there is no ethernet connection possible to the internet, no line)
Thanx in advance and nice video.
Hi thank you for the wonderful tutorial, I currently have a Netgear r7800 and a Archer C7 I want to set up the r7800 as my primary router then have the Archer c7 connected as an AP is this where you showed how to set up wireless AP? Sorry I am very new to this
hey man, thanks a lot for this. can I leave default openwrt firewall settings? are they solid enough? thanks
Sir can you please make a video on openwrt WISP mode Mac address change actually I'm using openwrt firmware and I was connected via wisp mode to another wifi but unfortunately my Mac address had been blocked by the another wifi router and I want to change my wisp mode Mac address (wwan) . The thing is I can able to change LAN Mac address but when I override (wwan) Mac address it will automatically set default Mac address which was blocked by another router please help me
Thank you
i like the way he said " of course, we wil not powa of" :D
Lol, this was my very first video regarding OpenWRT. At this time, my English was not good (still now, haha). Anyway, I made a lot of friends who is using OpenWRT along the ways and a lot of tutorials had been done, you can check them out in this playlist ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
@@VanTechCorner no man your English is good no worries xd and thx for ur work it helped me lots
So cool!
thx you but where is the next tutorial please, it's what i needed
thank you so much for sharing!
Thank you.
greetings, great video, thank you, i've just finally gotten onto openwrt and noticed the latest build or release (21.02.2) has quite a few changes on its UI, i.e. setup of static IP (is that essentially the same as static routes ?), the port forwarding section, etc... also, should i enable IPv6 or not, running old generation adsl copper line at 6 Mbps (download) and 600 Kbps (upload)
Hi, this video was made long time ago. You can go to my channel homepage to see more recent videos, or check out the OpenWRT tutorial playlist ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Hi sir @Van Tech Corner. Will you please make videos how to install daloradius in glinet flint 2? Would that be possible?
Great tutorial
Thanks, check out other OpenWRT tutorial on my channel at ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Thank you for this good tutorial!
I want to use the realtime graphs of OpenWRT (wireless signal, noise) for a special projekt.
Is it possible to read out realtime the data of signal and noise? If yes how to do it?.
It would be great, because I want to steer a wlan directional antenna with a stepmotor based on the routerdata.
thank you for your kind repley in advance
Very usefull !! :)
Glad it was helpful! Please consider subscribe the channel to support me as well as stay tune for the video in the future ^_^
Bác có thể làm video hướng dẫn cài đặt và test sqm-autorate trên mạng LTE được không, rất cảm ơn bác.
Hi. Can you show how you flashed your DIR-842 with OpenWRT? Because there is just snapshot version and no official release. So getting Luci packages to install in the DIR-842 in offline mode is a hassle for people with only 1 router. Thanks.
Hi, I have more then 1 router and the process is very simple. However, if you are having only 1 router you can use SSH to set it up:
- Setup your WAN interface (DHCP, PPPoE) by editing /etc/config/network or using uci commands
- Setup your OpenWRT as AP client
- Once there is a working internet connection, run opkg update & opkg install luci and that is.
Thank you so much!
You're welcome! There are still 30+ tutorials for OpenWRT. Feel free to check it out here ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Hi big!!! Thank you for this fantastic guide. But can I ask you a thing? On WAN interface I've put PPoE and it doesn't work...instead with DHCP it works.. can I ask why?
As second question .. I would like to know why we put PPoE on the router too if we have already set it on modem.
Thank you so much...i have fttc fiber
Pls ;(
Hi, I am not really understand your question, please provide more info about your actual network setup and the devices you are using, if you want to discuss more about it here. You need to find out which protocol is used by your network provider and then configure the same on OpenWRT. For example, the ISP provided a router and deploying the internet using PPPoE. Now, if you want to replace their router with a new one running OpenWRT, you need to setup your WAN interface as PPPoE Client. Most of the network providers are using a GPON router + PPPoE where the device is connected to the fiber cable and act as a optical network terminal, as the same time running PPPoE to establish the internet connection. This is just the first video in my OpenWRT tutorial playlist, to know more you go to the channel homepage and have a check.
@@VanTechCorner hi, thank you for your interest. I have a modem (FTTC) and a router Liksys with openWRT installed.
so I have two different nets. (192.168.0.0 where the modem is 192.168.0.1 and second net 192.168.1.0 where openwrt router is 192.168.1.1). on my modem I've already set my PPPoE configuration. the problem is that whether I connect with dhcp to my modem is ok, if I try to use PPPoE directly to ISP the connection goes DOWN. I don't understand...it's like a double PPPoe... :( I hope it is enough. thank you. have a nice day
I see, so you got my answer above. In this case it is not just the modem, I assume it is a GPON router which convert the optical signal to electronic signal, and then running PPPoE to establish the internet connection. Of course you can't simply replace the ISP router since they only accept their own device (by checking the MAC, the SLID and maybe serial number when it is trying establish the PPPoE connection). You can contact your ISP if you want to do so.
Hi your video is good but 1 my hub is ADSL 2 what username and password is this one that you get on the hub provided by your ISP ?
My router doesn't get assigned IP ad from ISP on WAN. But if i connect cable directly to computer i get IP and internet as a result, do you know where i should look to get ip assigned ?. I can see TX status sent pockets out, but Rx 0 pockets in.
Hi, can you tell me more about your network setup (how devices are connected) or the internet plan and provider you are using, perhaps I can do something about it. "if i connect cable directly to computer i get IP" => do you mean the PC is directly connected to the optical network terminal or something different?
@@VanTechCorner ISP=>Modem=>Router=> NO IP Assigned (i112.fastpic.ru/big/2020/0825/46/ed32db81402e7eff2747364c6452d246.png), but if ISP=>Modem=>PC i get internet.
Are you sure that your PC is connected to the modem or it is a GPON router. Maybe you can do ipconfig/all in your computer to get the IP and gateway information, and setup these info in your Openwrt WAN interface.
17:00 i have fibre broadband and modem, but my ‘network’ in status shows ipv4 and ipv6 upstreams. And when i try to configure pppoe it says connection failed and internet dies. Without configuring pppoe default is dhcp and it works fine with it. Can u tell me in what cases should i try to configure pppoe? I want my new openwrt wifi router to handle everything and isp modem to do the least. Pls reply someone?
cool, does MPTCP (Multipath TCP) come on the latest images for x86 & arm/pi4 , how might we compile that in if not
Question; why did you install it on a very simple and light router such as the TL-WR841N? The OpenWRT page says this router is no longer supported as of 2091 due to its very low hardware specifications.
Can I still install OpenWRT on a router such as the TL-WR841N?
Hi, this is the most simple/ cheap device to start with and if something goes wrong, you can find a replacement easily. Even the router is no longer supported (no new updates), the old versions are working fine.
You can check out this playlist to find out other OpenWRT tutorials, including the installation on x86 PC, Mikrotik and DLink routers - ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
I learned a lot from this tutorial but I am looking for a specific feature does openwrt have MESH wifi and do you have a tutorial?
Hi, thanks for the comment. There are other OpenWRT tutorials, let's check it out. OpenWRT supports 802.11r (Fast-Roaming) and you can install wpad to configure that.
Que buen tutorial! muchas gracias,
hi. can you do a tutorial for openwrt that can run telephone network,running in local network..,
How to change led configuration for ath71xxx i have all the following gpio to make the led on and off.
I need you help about the topic: Port forwarding and Static IP on OpenWRT. On the new version of the OpenWRT (19.07.4) for Static IP Adress, have a option with name: DUID. What would it be? Do I need to add anything to it?
Thanks for this video.
Hey, for the static IP with DHCP, you just need the IP and MAC address, other fields can be left blank.
@@VanTechCorner Understood. Thanks, Van.
You're welcome. Check out my other OpenWRT tutorials on my channel and thanks for supporting!
So creative lah 🙈
Thanks 😅 Hope it would help you!
Can I change mac address on that?
em muốn build lại 1 bản firmware openwrt thì cần những gì ạ
Nice video
Help for SL-R7205 router
Current software version 1.0 6.3
How can update and wifi-wan mac clone change
Can you do an explanation of the work of a project such as cloudwifizone 😀
I already some video regarding "Guest WiFi Network" and "Captive Portal/WiFi Splash Page" on the channel. You can check it out.
how to configure openwrt so it all interfaces are dhcp disbled, new interface added: "relay_bridge" protocol: relay birdge, networks lan wwan, and then lan devices must recieve ip from upstream dhcp which also gives ip to wwan interface. Currently my lan device fail get ip automatically, but when I enter Ip parameters to fit into upstream subnet then it this lan computer has internet.
amazing tute
Thank you. Feel free to check out other tutorials at ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Hi Mate, i think your mike needs an upgrade, it sounds tinny. Your great skills are suffering from the overall sound quality, so please do something to improve the sound for all listeners!
Hi, thanks for the feedback. I have upgraded the microphone, you can check it out on other tutorial videos on my channel.
can use same method for xiaomi ac3200?
Hi, could You just tell me if this is possible to change transmit power above standard for example like in mikrotik router boards?? I have tp-link archer c7 and I'm thinking about put oper firmware mainly for this reason
Hi, yes you can. For example, I am able to set the transmit power to 23 dbm with the DR900VX. ua-cam.com/video/lgvXPLYaL7c/v-deo.html
“This is virus WiFi”
Me: Lmfao!
Lol 😂😂
Bro, maxis can follow same steps on PPPOE?
Hi, for Maxis you need to check if they are using VLAN for PPPoE or not and set up the same on OpenWRT. I have made video with PPPoE with VLAN as well, you can check it out.
Hi, I recently installed OpenWRT on my Archer A7 V5, but now I can't restore the original firmware, I tried with TFTP 192.168.0.66 and the Recovery file, but stay at 94-96-98%, any advice?
Any fix?
Greetings,
is there any way to update openwrt firmware.
without losing the installed apps.
Thank you
Hi, you can upgrade the firmware using LuCI and tick the box "Keep the configration value", it will keep you your configurations but the apps will be deteled for sure.
Hello sir, can i set up multiple vpn that connect simultaneously in openwrt router ?
I want use 2 different vpn simultaneously, 1 for my pc and other for my xbox.
Did you find a way?
27:50 Do you know if a Pi 4 can be an AP and a Wifi client at the same time?
Also I noticed that to make a Pi 4 an AP over 2.4GHz I had to set the Mode to "Legacy".
Hey, let's me test and get back to you. Which OpenWRT version you are running on the Pi?
@@VanTechCorner Brilliant, thank you! I'm using the snapshot image: openwrt-bcm27xx-bcm2711-rpi-4-ext4-factory.img.gz on a Pi 4 which I downloaded a few days ago.. around Nov 28th. I also posted a question on the OpenWrt forum here: tinyurl.com/yymenh29 So far I could only get the Pi 4 to be a Wifi Access Point OR a Client, not both at the same time. I'm interested to know if you can get that working. Cheers.
@@VanTechCorner I guess you didn't get a chance to try this out? A mod on the OpenWrt forum says it is not possible on a Pi 4. preview.tinyurl.com/yyg2dlpa
Where is the device selection guide?
Hey, you can refer to this document openwrt.org/toh/recommended_routers
"Security pachech" :D 1:00
Sorry for that, my English is not good and it is not my native language.
@@VanTechCorner no worries.
I was just joking
How can add some custom package from others that not included in basic Openwrt?
Hi, sorry for the late response. On LuCI, you can go to System - Software, click on the Configure button and add the URL of the new source there.
@@VanTechCorner 🙏 Thanks ,I'll check the source URL
I don't understand. In the videos, it looks like you are using LEDE rather than OpenWRT. But LEDE is obsolete now and no longer being developed.
Hey, LEDE/OpenWrt had merged to become one. This video was made long time ago, and the information is out dated. You can check out my recent videos for more information.
OpenWRT DHCP and IPv6? any topologies, videos ?
openwrt.org/docs/guide-user/network/ipv6/start You can find it here.
Hello, I really like your videos and I have found them useful, I already have a router with openwrt, but I want to buy another one with more flash memory, and more powerful, which models and brands could you recommend, I am in America and I have no access to European brands, I could buy it on amazon or aliexpress.
Hello, I really like your videos and I have found them useful, I already have a router with openwrt, but I want to buy another one with more flash memory, and more powerful, which models and brands could you recommend, I am in America and I do not have access to European brands, I could buy it on amazon or aliexpress,
Hi, can you tell me your budget? If you want to purchase a powerful router that can run OpenWRT, try the Linksys WRT AC1900.
@@VanTechCorner no more than 80 usd, i was watching a xiaomi ac2100 router, what you think about it? thanks for your help.
Not bad, there are 2 version with the same name: Xiaomi Redmi AC1200 and Mi Router AC2100, both share the same specs and both can run OpenWRT.
Can install driver wifi on laptop or mini pc with open wrt? I have mini pc from intel, then i install open wrt on my mini pc, but interface read only ethernet
Hi, You need to install firmware and driver for the wireless card. There is already a tutorial on how to configure a wireless network card, you can check it out if need further information.
@@VanTechCorner thank you
Nice
Thank you, stay tuned for the upcoming videos xD
Are you from Vietnam?
Yes I am.
I’m using ASUS RT-AC57U router and I don’t have installation ULR, only installation Method.
Please help
Hi, could you tell me what is the hardware version of the router. This is th URL for the hardware version 1 which has MediaTek CPU. openwrt.org/toh/hwdata/asus/asus_rt-ac57u
Van Tech Corner I’m not sure. Where do I find my hardware version? I also have a TP-Link WR904N V6 router, still can’t download it.
Van Tech Corner it says HW Version A but doesn’t says 1 or 2
Can you login to the router and check at the information tab.
Van Tech Corner I don’t have the hardware information in the router page like I do in my TP link. Can you connect to me with TeamViewer and help me??
i have installed open wrt on my tplink wr 840n i conect it as a wifi repeater but when i scann wifi networks the signal was very low of my 2nd wifi before open wrt it was 67% now it scann that wifi network the signals shows only 32% also the transmit power is very low it cant cover my little store room i put router there when i sit near router it gives 60% sgnal how can i resolve this
Hi, I would suggest to check the channel of the main AP and optimize it. Can you use an Wireless Analyzer app on your smartphone and check the signal. If you could provide some more info and photo I will try to help.
@@VanTechCorner how can i contact u bro u r fb or insta
Hi, in the channel main page there is a link to my FB. You can ping me there.
@@VanTechCorner sir check your inbox
If im on tm unifi do i need configure the switch to vlan 500 .. Im lost at this part the tagged / untagged / off
Hi, this VLAG tagging can be easily configured in Network - Switches. Can you upload the screenshot of that page to pictr.com or Google drive and share the link, I will have a check on that.
Hello friend, any update on the PPPoE setup.
@@VanTechCorner yeah it working now need to tagged WAN & CPU0 with vlan id 500 (unifi ISP)
Perfect. I am running OpenWRT on the Dlink DIR-842 C2 which was provided by Unify lol
@@VanTechCorner is it worth to install open wrt on tp link provided by unifi? I'm trying to combat bufferbloat and my router has qos but it doesn't help at all. Will openwrt sqm help? My router is a archer c1200
How can debrick the router?
Different routers have different way to debrick. You can check out this document openwrt.org/docs/guide-user/troubleshooting/generic.debrick, or find the way to debrick on the device techdata page.
OpenWRT according to Latka.
At 16:33 Is the PAP/CHAP username and password just the password of the modem/router provided by my ISP ?
It is the PAP/CHAP password that was provided by your ISP. Usually you can see it on the contract, or login to the current router and check the "PPPoE connection" setting.
@@VanTechCorner Thank you!
Nope worry, also check if there is any specific VLAN required by the ISP when setting up the PPPoE connection.
@@VanTechCorner Do I also need to setup the dsl modem provided by my isp to bridged mode? Or do I just leave it as it is?
Can you tell me how the devices are connected? If it is a modem, you don't need to set it as bridge. But if the device is a GPON then it is yes.
Anyone knows which dhcpv6 client Openwrt used in wan side?
Can you tell me what you are doing with the WAN interface? If the router is connected to the ONT/ modem, I assume the protocal should be PPPoE instead.
what about router with better than 64mb ram
Are you looking for advice? Give me a budget, I'll give you some names! (Also add if you have any requirements, for eg. AC wifi, USB 3.0, etc.)
@@VanTechCorner i have redmi ac2100, i want to install openwrt cuz so many bug after update to new stock firmware but this router can't install openwrt from (upgrade firmware) like ur video.
There is the device techdata on openwrt website. Is this your router's model? openwrt.org/toh/xiaomi/xiaomi_mi_router_ac2100
any course
Hi, you can check out other tutorials about OpenWRT for free. There is no courses and all of them are for free. ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
I find RouterOS less confusing to configure than OpenWRT.
Are you sure. I am using OpenWRT, pfSense, RouterOS and Cisco IOS. To me, OpenWRT is user friendly and you can set it up from the first time login. RouterOS is not easy to configure unless you have some knowledge of networking.
@@VanTechCorner I'm trying to configure vlan trunk from mikrotik to openwrt, something is conflicting. I tried dd-wrt much easy to configure.
Did you record this in your bathroom?
Yes :)
See van i have comment on your video... 🤣🤣
Hey, this is the first comment on the channel :D
It si to tiny,hard to see
Hi, if you watch the video with the PC the text is clearer. In the recently videos, I made the CLI text bigger, you can check them out here ua-cam.com/play/PL58__w3t_eTbcBQ9oJ8jXCxPtBiac59vC.html
Better is Mikrotik
Hi, can you tell me and other viewers what point is better? GUI, performance, configuration, etc?
@@VanTechCorner GUI , and according me configuration. I prefer Router OS
Do you know that you are comparing a paid OS to an open source OS. I have been working with Cisco IOS, OpenWRT and Router OS and OpenWRT GUI is the most user friendly. How many steps you need to do to have a working Wifi on a Mikrotik router and let's compare it to OpenWRT ...
unable to change lan ip in new version and I can even edit static leases please help @Vantechcorner
Hello, I have the belkin f9k1103 router, I've wanted to install Openwrt for a long time but I can't find the way, I tried fw f9k1109 but the wifi doesn't work ... any ideas to install 3rd party firmware?