Why not use a heat source some how? Keep the material from solidifying if you some how heated the materials, even just a few degrees might make all of the difference here.
I wonder if it isn't possible to have a small vacuum near the extruder for pulling the dry geopolymer concrete mix into a small mixing chamber and mix the water from a small hose so there is an on demand mix of no more than 1/2 meter before the extruder. That way there aren't long clogged tubes and wasted material that has to be flushed out of hoses. Only make what you need at the extruder itself. Can probably even 3d print the extruder and have more on hand if a replacement is needed. I'd like to see a aircrete version of this as well.
I don't understand why they haven't figured out mix design yet. One look at the high performance polymers used in high security prisons is one idea. The other seems so obvious but I hesitate to say.
ребята , неправильно вы строите . Сначала ставите стену из пенопласта втыкаете в неё достаточно пластиковых арматурок чтобы торчали с обеих сторон а потом гоняете свои принтер вокруг этой пенопластины тогда дом получится не только для Дубая но и для Москвы
Very genuine presentation. All the best for the team behind.
Great presentation! This team of people: you can tell they care and best of all, they have a sense of humor 😁.
Thanks to the geopolymer team and Renca for this fun video. I learned a lot and look forward to your great innovations in 3D building to come.
Excellent. How can the public invest in/and support Renca?
Why not use a heat source some how? Keep the material from solidifying if you some how heated the materials, even just a few degrees might make all of the difference here.
I wonder if it isn't possible to have a small vacuum near the extruder for pulling the dry geopolymer concrete mix into a small mixing chamber and mix the water from a small hose so there is an on demand mix of no more than 1/2 meter before the extruder. That way there aren't long clogged tubes and wasted material that has to be flushed out of hoses. Only make what you need at the extruder itself. Can probably even 3d print the extruder and have more on hand if a replacement is needed. I'd like to see a aircrete version of this as well.
What is the cost of your good system?
Молодцы ребята! Привет из Казахстана
Como es internamente la bomba de geopolimero? What is internally the concrete pump? Thanks.
Wonderfull thank you 👍🏻
I don't understand why they haven't figured out mix design yet.
One look at the high performance polymers used in high security prisons is one idea.
The other seems so obvious but I hesitate to say.
Uses 10x less energy? That doesn't sound right. Plus, doesn't the curing require heat?
High strength geopolymer mixes can be produced with ambient air curing
concreting curing produces heat
do you have a printer?
Put me down for a printer when you get them working
Buy ours, it's reality. 3dprinthuset.dk/3d-construction-printer/
www.mudbots.com
ребята , неправильно вы строите . Сначала ставите стену из пенопласта втыкаете в неё достаточно пластиковых арматурок чтобы торчали с обеих сторон а потом гоняете свои принтер вокруг этой пенопластины тогда дом получится не только для Дубая но и для Москвы
👍