When you use this link to visit our sponsor, you support us► Fisch Forstner Bits: amzn.to/2tvzbJg Fisch Drill Bits: amzn.to/2BHJLl4 Subscribe (free) to Stumpy Nubs Woodworking Journal e-Magazine► www.stumpynubs.com/subscribe.html
I haven't done any real woodworking in 40 years and now being semi-retired have decided to get back into it. I have found that your videos are very informative and entertaining and plan to keep watching. Thank you for all the helpful advice and I look forward to future videos.
As a long time woodworker I have learned most of this, but almost always learn something from even your most basic videos. The value of thoroughly understanding the fundementals and practicing good habits, in any craft, can never be overstated. Thanks James!
As always, you provide sound advice for your viewers. I really appreciate this because I had no role models to teach me anything about woodworking when I was a young man. Thanks again.
Hi James, This series is a must for anyone who has a table saw for experienced, intermediate or a new user, in what to do but more importantly what not to do. As you say at the beginning keeping your fingers in the right place is a really good idea. Cheers, Huw
This really helped me improve my end bevels: thank you James. A couple additional things I noticed / screwed up, from a beginner perspective: I used a digital angle gauge to dial my blade right to 45.0 in relation to the table, but my end bevels were all inaccurate, ultimately because the zero clearance insert I was proud of making myself was actually raising my workpiece about 0.3-0.4 degrees in relation to the table. My power switch on the right, and the arbor tilts to the left- when using the left slot, it felt really unsafe to have to draw my hand across the kerf line to switch the power off: just felt like something that would require extra risk and vigilance, without any benefit compared to using the right slot. Altogether, thank you!!
I’ve watched the previous 3 editions of this series and I can’t imagine there exists a better discussion on the fundamental use of the table saw. Extremely well presented.
I know this video is older but thank you. I’m just starting out using my table saw. I’m making a frame for a mirror and I don’t have a miter saw. My dad says no problem you can do it with your table saw. So this was the best video ever. Very informative and you explain in a way newer people can understand. Thanks again.
Thanks alot! I've really learnt so much in this series, I'm amazed that some people gave this a thumbs down these videos have without a doubt saved my fingers!!! Thanks Again!
Thanks for another great tutorial. Your videos are informative and you don’t talk down to us. Some of the presenters on you tube think they’re the best thing since sliced bread! You don’t come across that way and I appreciate it. Please keep posting.
Love your videos, love that you talk a lot,more information that way. Ive not started into things yet, still learning and attempting to get basic hand tools to go that route. You have likely the best how to vids ive seen and can reference any subject necessary when I do start. Bought a plane and mini plane and began getting the blades up to snuff using your tips for sharpening. I was amazed that I was actually able to get something on its way to being sharp as it needs to be. Thank you for being here.
You do a terrific job of explaining your many great ideas of how to use woodworking tools to produce quality work......safely. Never fail to learn something new every time I watch one of your videos. Thanks for taking the time. JD in the Missouri
The piece right near the end of the video about cutting bevels less than 45 was what I was initially looking for. I read a how-to article on how it could be done but didn't quite understand it until you demonstrated it here. So.. thank you! A ton of good information.
I'm greener than a country bumpkin when it comes to carpentry, and I'm only in the process of scoping out necessary tools, etc. for the backlog of house projects I've got going on. This video is really helping me mentally prepare for the types of cuts I'll need to be doing, and some best practices for achieving them. Thanks!
Gosh, James, I want to sincerely thank you for your truly informative videos. As a newb woodworker, my confidence has increased in leaps and bounds by watching your videos. I’m not foolish enough to think I’ll be making kitchen cabinets tomorrow but I’m certainly more prepared to face the challenges of using a table saw, and to be fair, many other things. Thank you for your time and effort that you put into these videos.
I just watched this video to learn more about the difference between a miter and a bevel. I have not seen the first three videos in this series, but I will now take the time to watch them. I really enjoyed this one and learned a lot from it. It was nice to see that the video was well done and the presenter clearly was very well spoken, prepared, and a well seasoned woodworker with years of experience that he is very good at sharing and showing to others. That makes him a cut above many of the other videos available out there. Thank you.
Ever since finding this channel, I've been binging it every day. While there's tons of useful advice, that last tip at the end would have helped very much in a project I did during school that had me resort to using a band saw to freehand some miters. Now maybe I'll actually finish it. After all, it's sitting right by my right foot.
Your videos are great....you have a natural talent as an instructor.....thank you so much...really enjoy them and have learned a lot of new 'tricks' that lend themselves to efficiency and safety!
Thank you Stumpy Nubs. Listening right to the end paid off for me. Now I see how an acute angled bevel cut is possible on the table saw! and I can do my own reducing door threshold :)
This video is absolute Gold, I have been trying to find a way to do a 30 degree beveled rip cut without assembling some crazy jig and this video saved me! Thanks!
I’ve been a hobbyist woodworker for a very long time and I still learned a couple of tips and tricks from your video. Thanks and keep up the great work
The information is great and very useful. I am a weekend woodworker, and have learned a lot from your channel. But what I really appreciate is your delivery. Your voice is calm and measured. You don't shout to get a point across. You don't fumble with words. Your cadence is remarkably pleasant. You carefully distinguish fact from opinion. I'm a scientist in "real life", so I appreciate a calm, factual presentation.
My son and I love these videos my man and like the previous comment the articulation and how you explain things and love of the hobby have really inspired and helped me out. This was a very intimidating saw at first and my boy really wants to get into the hobby but when he hears your explanations on why kick back happens it has given him a respect of this saw. And I still won't let him use it just yet. Hope to see more brother thanks.
Thanks, Stumpy I need to cut a 25-degree bevel edge on a chisel sharpening jig. You showed me a clever way to do that using my Powermatic table saw - using an auxiliary board between the work piece and the fence.
I find your video's very easy to watch and very informative. They are helping me to learn how to safely use a tablesaw. Thank you and continue to keep making more videos as your input is valuable. Many thanks. John (U.K)
Thank you, I am just beginning down this path of woodworking...I have a Ryobi Table Saw I picked up recently, I am looking forward to picking up the miter gauge after this video. Thanks
I would love to see you make your tablesaw sled. Have you made a video showing how to make it? If so how do I find it? Thanks. Also you are a very articulate speaker. You videos show you are very knowledgeable, clear, and educational. I grew up in the wood shop. My dad was a Carpenter, Woodworker, and painter. Though he did all of that his love for woodworking shined through more so than any other skill he acquired. Even though I grew up learning the rules, methods, and dangers of woodworking your videos serve as good reminders of what I learned growing up. Again, thanks for the videos.
Stumpy, I love this vid. Most of your ideas are exactly like I instruct my students. I think I will show this video as well as demonstrate, since we seem to be living in a video generation. Thanks again
I have owned a 3 HP Unisaw for years and love it. I framed my basement with recycled wood and saved a lot of money by ripping. As I watched this I about jumped out of my chair when you described the various ways to get the work to kick back. My dad trained me to stand aside when cutting. Your explanation about the work jammed between the fence and the blade about made me sick since I can imagine that I am there as you describe it. Oh, and I love the pusher block. Keeps you fingers far away from the blade...
Excellent video on how to cuts angles on the table saw. Very professionally done and very informative. Lots of good tips. Thanks for the tip on Fisch bits. I will have to start swapping out my mediocre set.
Hi James, thank you this set of videos aimed at me, a new wood worker. I find them very easy to watch and follow. Also you do not come across as condescending like some others I could mention. Tony.
I've now watched all five, all more than once, and taken plenty of Notes for myself to use later on. BRAVO!! Your voice is easy to listen to and very clear. I'm one of those people who hears the lyrics to songs in odd ways and everyone later laughs hysterically when they realize what I'm actually singing: "...so long. It's been good to know you" ... becomes "so long. It's been good linoleum." Well, if everyone spoke as clearly as you do then I would never be teased again!! I am so perfectly the person you had in mind as the Audience for the five videos in Table Saw 101. I needed every point you made. I am deeply appreciative of your clarity and succinct style of presenting the main ideas and also the crucial though small detail. Second BRAVO! I want to know more about the "school" you are doing or planning to do. How far along are you? Information? DHopkins
I spent like 4 hours last weekend trying to safely cut a very acute angle and eventually had some ridiculous jig started and realized I should chill out and go watch how real woodworkers have done it once I relaxed. I just put that project on hold and still happened to watch this video. Thank you. I love simple solutions.
I have been struggling with some weird angle bevel cuts for external corners for trim around Plasterboard pillars. That double sided tape and the extra piece of wood I think is my answer to finding the right angle. Thanks mate, i really appreciate you sharing your experience 👍 😀
Thankyou I enjoyed watching. I'm struggling with my table saw due to the way it's constructed. At the end of the day it's what i can afford but can be frustrating as the bade rocks as you wind it up and down. I have to remember to set the angle on the up wind so that if I need more or less depth of cut i finish movement with the pressure in the right direction. One of those digital devices would surely help. Cheaper saw benches also go out of alignment with the slots if they get gummed up as the added strain on the peculiar hinge arrangement causes twist. You answered my previous query about a bevel stop too, thanks.
I have to watch your videos for a assignment for school and also put some tips down because in my class we use saws, I made a phone holder and it was pretty easy to make
You are correct. Although I am not new to table saws, I did learn something new to me. I like the double stick tape idea although I don’t know when I will ever need it. I’ll remember it.
I don't know about anybody else but being reminded to click "Like" on a video works on me. I'm four videos into this series and just remembering now to click it.
You rock James. I have been making dust for 30 years. I am a safer woodworker from watching your videos. And I always learn at least one new thing. I need to cut a partial depth angled taper (simple project idea, difficult order of operations haha) and you triggered me thinking about how to do this in a safe way.
I’ve been anxiously waiting for this video. Thanks for the tip about using the fence on the left of the blade for right tilt arbor saws. I actually tried that today while building the spline jig you have as part of your sled plans. The issue I’m running into now is that my table saw was bought used and the square tube doesn’t extend very far to the left of the blade. As such my biesemeyer fence doesn’t fully lock down any further than an inch or two past the blade so any piece wider than that can’t ride up against the fence properly. Your advice would be appreciated.
Loving all your videos. I hope to remember all those tips when I'm in the workshop. It just occurred to me that a printable tips cheatsheet would be very nice!
James, the only thing missing in this series is that Redwings cup of yours. LOL- Hey I have an autographed Gordie Howe poster and puck on my wall behind me. Love your channel man- I have been an iron worker for years so picking up woodworking is very different for me. Many thx for all the teaching. Yak
Excellent tips and instructions. starting a furniture business and I appreciate any tips to make a more efficient and precise piece of furniture (art). Thanks, God Bless. subbed!
Have been using TS for 30+ yrs & ashamed to admit I did not know of a couple of practices contained in this video. No wonder I disliked angle cuts so much. I inspired to mount a new attack on some of those cuts I've been avoiding. Great tips.
Very well explained, I got a lot from it even though I have years of experience. Most instructors talk about the alignment of the blade to the slot when the blade is at 90deg, however very few ever mention checking it at 45deg. If the front and back measurements are the same at 90 it does not follow that they are still the same at 45. This is because the table surface may not be in the correct plane. This makes no difference at 90 but matters a lot at 45. At 45, if the measurement from the slot to the back of the blade is not the same as at the front, the work will bind on the back (either L or R side) as it passes. Either the back or the front of the table needs to be raised up with shims to correct it.
Awesome videos yes I am a beginner, I do have one question, why is it that when you add the board to the miter no one puts a piece of wood so it can ride with the other miter slot that way you are using both slots won't that give more support to the cross board on the miter?
James that was brilliant. I really liked that you covered mitering the stop block, using both miter slots, and how to do acute bevels. Putting the use of the digital gauge in here made it very idiot proof. I was in two minds about whether references to normal and donkey ear shooting boards would have over-complicated it for some and made it too much effort for them but those devices help to create much better gluing surfaces on end grain as well as fine tune the lengths.
I appreciate the tablesaw tip my tablesaw goes from 0 to 45 but with your video tip I was able to cut my 50° angle a little hairy running the board up on edge but I got the job done with some help with some feather boards🙂 Thank again
Great job. You filled in some gaps in my knowledge and from now on will be soooo much safer. Thank you for your efforts which are as usual, comprehensive.
Really useful tip on non - 45 degree bevels: thanks a lot for this series. I too have replaced my brad-point bits with Fisch ones and am so impressed compared to the cheap Far Eastern set I had. Those went to re-cycling! Forstner bits next, as you say buy them as needed.
I love the project videos, however I think these “basics” videos are just as if not more important. Thank you for doing these! (I’m still trying to figure out a way to add a “riving knife” to my job site Saw, it’s just been too cold) thanks again for the tips!
Brian Bishop on a saw I owned in the past I scribed the OEM blade guard splitter onto an old blade plate and did some hack saw and grinder work. Some aluminum would have been easier to cut.
I was thinking I could use an older blade and cut it then epoxy it to the plate. It’s just to get me by until I can get to my two craftsman saws that are buried on the other side of the garage, they have all the safety items still with them. I am building a two saw rolling work bench with them. The little Saw is just to use until they are “set free”. Thank you both for the info!
When you use this link to visit our sponsor, you support us►
Fisch Forstner Bits: amzn.to/2tvzbJg
Fisch Drill Bits: amzn.to/2BHJLl4
Subscribe (free) to Stumpy Nubs Woodworking Journal e-Magazine► www.stumpynubs.com/subscribe.html
Do you have videos that build cabinet using table saw?
Thank you! This has been very useful for me. I am a new table saw owner. I'm sure that I'll be watching again, and your other videos.
What an uncommon pleasure it is to listen to such an articulate individual speak in a professional manner.
My favorite videos are stumpy and the wood whisperer. Theyre both easy to understand and listen to
What an appropriately worded comment, very suiting and well described.
I watch a lot of how-to videos, but very few are as insightful, direct and helpful as this series. Well done.
Thanks for making this series. As a newbie with no background in any of this it is very handy!
Really like the idea of using two sided tape and an extra board for making the 60° bevels.
Haven’t used that method but it is certainly a safer and probably more accurate way as you are not on the table insert but on the bed of the saw.
I haven't done any real woodworking in 40 years and now being semi-retired have decided to get back into it. I have found that your videos are very informative and entertaining and plan to keep watching. Thank you for all the helpful advice and I look forward to future videos.
As a long time woodworker I have learned most of this, but almost always learn something from even your most basic videos. The value of thoroughly understanding the fundementals and practicing good habits, in any craft, can never be overstated. Thanks James!
Nice to find someone who knows their woodworking stuff and can talk clearly and confidently to boot! Cheers for the series.
As always, you provide sound advice for your viewers.
I really appreciate this because I had no role models to teach me anything about woodworking when I was a young man.
Thanks again.
Couldn’t agree more, learned on my own.
That last tip-taping a piece of stock for support while running a piece on edge through the saw-awesome.
Hi James, This series is a must for anyone who has a table saw for experienced, intermediate or a new user, in what to do but more importantly what not to do. As you say at the beginning keeping your fingers in the right place is a really good idea. Cheers, Huw
This really helped me improve my end bevels: thank you James. A couple additional things I noticed / screwed up, from a beginner perspective:
I used a digital angle gauge to dial my blade right to 45.0 in relation to the table, but my end bevels were all inaccurate, ultimately because the zero clearance insert I was proud of making myself was actually raising my workpiece about 0.3-0.4 degrees in relation to the table.
My power switch on the right, and the arbor tilts to the left- when using the left slot, it felt really unsafe to have to draw my hand across the kerf line to switch the power off: just felt like something that would require extra risk and vigilance, without any benefit compared to using the right slot.
Altogether, thank you!!
I’ve watched the previous 3 editions of this series and I can’t imagine there exists a better discussion on the fundamental use of the table saw. Extremely well presented.
I know this video is older but thank you. I’m just starting out using my table saw. I’m making a frame for a mirror and I don’t have a miter saw. My dad says no problem you can do it with your table saw. So this was the best video ever. Very informative and you explain in a way newer people can understand. Thanks again.
Thanks alot! I've really learnt so much in this series, I'm amazed that some people gave this a thumbs down these videos have without a doubt saved my fingers!!!
Thanks Again!
Thanks for another great tutorial. Your videos are informative and you don’t talk down to us. Some of the presenters on you tube think they’re the best thing since sliced bread! You don’t come across that way and I appreciate it. Please keep posting.
I appreciate these videos. I'm a newbie to this and I don't have a mentor, so I've found your series exceptionally helpful going through the basics.
There are lots of tutorials out there, but few are straight to the point without fluff. This is super helpful--kudos to you and thanks
Love your videos, love that you talk a lot,more information that way. Ive not started into things yet, still learning and attempting to get basic hand tools to go that route. You have likely the best how to vids ive seen and can reference any subject necessary when I do start. Bought a plane and mini plane and began getting the blades up to snuff using your tips for sharpening. I was amazed that I was actually able to get something on its way to being sharp as it needs to be. Thank you for being here.
Nice comment. Agreed :-)
9:23 is gold advice
Keep up the great advice 😉👍🏼
You do a terrific job of explaining your many great ideas of how to use woodworking tools to produce quality work......safely. Never fail to learn something new every time I watch one of your videos. Thanks for taking the time. JD in the Missouri
The piece right near the end of the video about cutting bevels less than 45 was what I was initially looking for. I read a how-to article on how it could be done but didn't quite understand it until you demonstrated it here. So.. thank you! A ton of good information.
I'm greener than a country bumpkin when it comes to carpentry, and I'm only in the process of scoping out necessary tools, etc. for the backlog of house projects I've got going on. This video is really helping me mentally prepare for the types of cuts I'll need to be doing, and some best practices for achieving them. Thanks!
Great tips. I'm really enjoying this series. Thanks.
Gosh, James, I want to sincerely thank you for your truly informative videos. As a newb woodworker, my confidence has increased in leaps and bounds by watching your videos. I’m not foolish enough to think I’ll be making kitchen cabinets tomorrow but I’m certainly more prepared to face the challenges of using a table saw, and to be fair, many other things. Thank you for your time and effort that you put into these videos.
Mind blown by the edge bevel part. Awesome tip!!
I just watched this video to learn more about the difference between a miter and a bevel. I have not seen the first three videos in this series, but I will now take the time to watch them. I really enjoyed this one and learned a lot from it. It was nice to see that the video was well done and the presenter clearly was very well spoken, prepared, and a well seasoned woodworker with years of experience that he is very good at sharing and showing to others. That makes him a cut above many of the other videos available out there. Thank you.
Ever since finding this channel, I've been binging it every day. While there's tons of useful advice, that last tip at the end would have helped very much in a project I did during school that had me resort to using a band saw to freehand some miters. Now maybe I'll actually finish it. After all, it's sitting right by my right foot.
Your videos are great....you have a natural talent as an instructor.....thank you so much...really enjoy them and have learned a lot of new 'tricks' that lend themselves to efficiency and safety!
As someone who has only recently acquired a table saw this video is invaluable. Thank you so much.
that last tip...awesome
Great tips , great series, your never too old to learn or refresh what you may have forgotten 👍👍👍
As normal, very informative video, you never cease to amaze me with your knowledge. keep the video's coming because i have learnt so much. Well done.
Thank you Stumpy Nubs. Listening right to the end paid off for me. Now I see how an acute angled bevel cut is possible on the table saw! and I can do my own reducing door threshold :)
A fantastic find! I'm a new woodworker and have just purchased a DeWalt table saw. This course is wonderful. Good on ya Stumpy.
I've been struggling with my miter wabbling in the channel and have it fixed now thanks to your tip! Thanks!!!
This video is absolute Gold, I have been trying to find a way to do a 30 degree beveled rip cut without assembling some crazy jig and this video saved me! Thanks!
It helps people that you respond to your comments. I appreciate your time
I'm loving this series. Excellent channel. Thank you!
I’ve been a hobbyist woodworker for a very long time and I still learned a couple of tips and tricks from your video. Thanks and keep up the great work
The information is great and very useful. I am a weekend woodworker, and have learned a lot from your channel. But what I really appreciate is your delivery. Your voice is calm and measured. You don't shout to get a point across. You don't fumble with words. Your cadence is remarkably pleasant. You carefully distinguish fact from opinion. I'm a scientist in "real life", so I appreciate a calm, factual presentation.
Thank you very much!
My son and I love these videos my man and like the previous comment the articulation and how you explain things and love of the hobby have really inspired and helped me out. This was a very intimidating saw at first and my boy really wants to get into the hobby but when he hears your explanations on why kick back happens it has given him a respect of this saw. And I still won't let him use it just yet. Hope to see more brother thanks.
Thanks, Stumpy
I need to cut a 25-degree bevel edge on a chisel sharpening jig. You showed me a clever way to do that using my Powermatic table saw - using an auxiliary board between the work piece and the fence.
I find your video's very easy to watch and very informative. They are helping me to learn how to safely use a tablesaw. Thank you and continue to keep making more videos as your input is valuable. Many thanks. John (U.K)
Thank you for posting these videos. I’m New to woodworking.
Thank you, I am just beginning down this path of woodworking...I have a Ryobi Table Saw I picked up recently, I am looking forward to picking up the miter gauge after this video. Thanks
I would love to see you make your tablesaw sled. Have you made a video showing how to make it? If so how do I find it? Thanks. Also you are a very articulate speaker. You videos show you are very knowledgeable, clear, and educational. I grew up in the wood shop. My dad was a Carpenter, Woodworker, and painter. Though he did all of that his love for woodworking shined through more so than any other skill he acquired. Even though I grew up learning the rules, methods, and dangers of woodworking your videos serve as good reminders of what I learned growing up. Again, thanks for the videos.
James
Your knowledge and delivery are top notch 👍
Stumpy, I love this vid. Most of your ideas are exactly like I instruct my students. I think I will show this video as well as demonstrate, since we seem to be living in a video generation. Thanks again
I have owned a 3 HP Unisaw for years and love it. I framed my basement with recycled wood and saved a lot of money by ripping. As I watched this I about jumped out of my chair when you described the various ways to get the work to kick back. My dad trained me to stand aside when cutting. Your explanation about the work jammed between the fence and the blade about made me sick since I can imagine that I am there as you describe it. Oh, and I love the pusher block. Keeps you fingers far away from the blade...
Oh my gosh, the dimples in the old miter bar worked amazing.
Hey James, thanks for this great video tutorial on safely cutting bevels on the table saw .
Love your videos, knowledge and personality. Thank you !!
Excellent video on how to cuts angles on the table saw. Very professionally done and very informative. Lots of good tips. Thanks for the tip on Fisch bits. I will have to start swapping out my mediocre set.
Hi James, thank you this set of videos aimed at me, a new wood worker. I find them very easy to watch and follow. Also you do not come across as condescending like some others I could mention. Tony.
I've now watched all five, all more than once, and taken plenty of Notes for myself to use later on. BRAVO!! Your voice is easy to listen to and very clear. I'm one of those people who hears the lyrics to songs in odd ways and everyone later laughs hysterically when they realize what I'm actually singing: "...so long. It's been good to know you" ... becomes "so long. It's been good linoleum." Well, if everyone spoke as clearly as you do then I would never be teased again!! I am so perfectly the person you had in mind as the Audience for the five videos in Table Saw 101. I needed every point you made. I am deeply appreciative of your clarity and succinct style of presenting the main ideas and also the crucial though small detail. Second BRAVO! I want to know more about the "school" you are doing or planning to do. How far along are you? Information?
DHopkins
I spent like 4 hours last weekend trying to safely cut a very acute angle and eventually had some ridiculous jig started and realized I should chill out and go watch how real woodworkers have done it once I relaxed. I just put that project on hold and still happened to watch this video. Thank you. I love simple solutions.
One of the best video’s on tips. Very useful and great info.
Thanks. Love your no nonsense and straight to the info approach.
That's it. You are officially my favorite Woodworking UA-camr! Dang, that was great! Thank you!!!!
I am always amazed with the high level of detail and useful information in all your videos! Thank you
Super helpful! Was having an issue with getting an end bevel correct and this solved it.
I have been struggling with some weird angle bevel cuts for external corners for trim around Plasterboard pillars. That double sided tape and the extra piece of wood I think is my answer to finding the right angle. Thanks mate, i really appreciate you sharing your experience 👍 😀
Have you tested miter gauges for table saws? Do you have a favorite? Your videos are great .
What an awesome video! These tips will make us all better and SAFER woodworkers. Thanks, james.
Thankyou I enjoyed watching. I'm struggling with my table saw due to the way it's constructed. At the end of the day it's what i can afford but can be frustrating as the bade rocks as you wind it up and down. I have to remember to set the angle on the up wind so that if I need more or less depth of cut i finish movement with the pressure in the right direction. One of those digital devices would surely help. Cheaper saw benches also go out of alignment with the slots if they get gummed up as the added strain on the peculiar hinge arrangement causes twist. You answered my previous query about a bevel stop too, thanks.
Love watching your videos, I’ve used power tools for years but just got a new table saw, so refreshing my self on the safety 😊
I have to watch your videos for a assignment for school and also put some tips down because in my class we use saws, I made a phone holder and it was pretty easy to make
You are correct. Although I am not new to table saws, I did learn something new to me. I like the double stick tape idea although I don’t know when I will ever need it. I’ll remember it.
I don't know about anybody else but being reminded to click "Like" on a video works on me. I'm four videos into this series and just remembering now to click it.
You rock James. I have been making dust for 30 years. I am a safer woodworker from watching your videos. And I always learn at least one new thing. I need to cut a partial depth angled taper (simple project idea, difficult order of operations haha) and you triggered me thinking about how to do this in a safe way.
Thank you, James, your tips are very helpful!
Excellent! High quality video. Lots of good info (and no gimmicks).
Great stuff. Anxiously awaiting video #5. Thanks James.
Really good job James show more please.
I’ve been anxiously waiting for this video. Thanks for the tip about using the fence on the left of the blade for right tilt arbor saws. I actually tried that today while building the spline jig you have as part of your sled plans. The issue I’m running into now is that my table saw was bought used and the square tube doesn’t extend very far to the left of the blade. As such my biesemeyer fence doesn’t fully lock down any further than an inch or two past the blade so any piece wider than that can’t ride up against the fence properly. Your advice would be appreciated.
Another very helpful tutorial Stumpy!
James, this has been a very informative series so far. Thank you.
Thanks for sharing your videos and tips, very useful
Loving all your videos. I hope to remember all those tips when I'm in the workshop. It just occurred to me that a printable tips cheatsheet would be very nice!
Great tip with the dimple and I like the jig! Very informative video, all very well explained!!
So much information, delivered succinctly. Thanks!
cool vid and great pace. Off now to the plywood vid, thank you very much.
How do you cut a super low/long bevel like 15 degrees?
Oh, you explained at the end. Crafty! I'd have sat there for days trying to figure it out lol
James, the only thing missing in this series is that Redwings cup of yours. LOL- Hey I have an autographed Gordie Howe poster and puck on my wall behind me. Love your channel man- I have been an iron worker for years so picking up woodworking is very different for me. Many thx for all the teaching. Yak
Brilliant, clear and informative - thank you.
Have you presented a video on making the plywood mitre set-up gauge? I would it valuable. Cheers :-)
Excellent tips and instructions. starting a furniture business and I appreciate any tips to make a more efficient and precise piece of furniture (art). Thanks, God Bless. subbed!
Thanks for the tips on bevel edge, will be very helpful on my upcoming project.
Have been using TS for 30+ yrs & ashamed to admit I did not know of a couple of practices contained in this video. No wonder I disliked angle cuts so much. I inspired to mount a new attack on some of those cuts I've been avoiding. Great tips.
Very well explained, I got a lot from it even though I have years of experience. Most instructors talk about the alignment of the blade to the slot when the blade is at 90deg, however very few ever mention checking it at 45deg. If the front and back measurements are the same at 90 it does not follow that they are still the same at 45. This is because the table surface may not be in the correct plane. This makes no difference at 90 but matters a lot at 45. At 45, if the measurement from the slot to the back of the blade is not the same as at the front, the work will bind on the back (either L or R side) as it passes. Either the back or the front of the table needs to be raised up with shims to correct it.
Awesome videos yes I am a beginner, I do have one question, why is it that when you add the board to the miter no one puts a piece of wood so it can ride with the other miter slot that way you are using both slots won't that give more support to the cross board on the miter?
Best definition for mitre vs bevel👌
James that was brilliant. I really liked that you covered mitering the stop block, using both miter slots, and how to do acute bevels. Putting the use of the digital gauge in here made it very idiot proof. I was in two minds about whether references to normal and donkey ear shooting boards would have over-complicated it for some and made it too much effort for them but those devices help to create much better gluing surfaces on end grain as well as fine tune the lengths.
Excellent video - Thank you!
I found this to be very helpful.
I appreciate the tablesaw tip my tablesaw goes from 0 to 45 but with your video tip I was able to cut my 50° angle a little hairy running the board up on edge but I got the job done with some help with some feather boards🙂
Thank again
Excellent James-you’re the best!
Great job. You filled in some gaps in my knowledge and from now on will be soooo much safer. Thank you for your efforts which are as usual, comprehensive.
Some great tips here - thank you.
Damn good tips there, thanks James
Really useful tip on non - 45 degree bevels: thanks a lot for this series. I too have replaced my brad-point bits with Fisch ones and am so impressed compared to the cheap Far Eastern set I had. Those went to re-cycling! Forstner bits next, as you say buy them as needed.
Norman Bott so three different sets of tools? Sounds unnecessary. Just get the good set the first time...
I love the project videos, however I think these “basics” videos are just as if not more important. Thank you for doing these!
(I’m still trying to figure out a way to add a “riving knife” to my job site Saw, it’s just been too cold) thanks again for the tips!
Look at MJ splitters from microjig.com
Brian Bishop on a saw I owned in the past I scribed the OEM blade guard splitter onto an old blade plate and did some hack saw and grinder work. Some aluminum would have been easier to cut.
I was thinking I could use an older blade and cut it then epoxy it to the plate.
It’s just to get me by until I can get to my two craftsman saws that are buried on the other side of the garage, they have all the safety items still with them. I am building a two saw rolling work bench with them. The little Saw is just to use until they are “set free”.
Thank you both for the info!